Angelia's-Garden

Sunday, May 29, 2016

HappyBday PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence.

Please do NOT add this to any Forums, Groups, or Website.

The cute little Tube I'm using is FTU and by AIKA here is where you can find her art Here

The Kit is called " My Bday Party " By Black Widow Creationz Here

My Supplies Here
Drop Shadow = DS = 2,2,50,5,black

900 X 900

Let's Begin

1.) EL. 32 - Copy and Paste = C&P - As New Raster Layer = NRL - place in center of canvas - DS

2.) Tube -C&P as NRL - Resize = R - if needed - place tube on star so it looks like, duplicate = dup. - blur - Gaussian - 6 - blend mode = soft light - opacity = 100 - merge down = md, - DS
3.) EL. 3 - R= 80% X 2 - sharpen more - -C&P as NRL - place on right corner of star - DS - tag reference = TR
4.) EL. 12 - C&P as NRL - R= 80% X3-USM- place on left side in front of Tube -- DS and Tag Reference =TR
5.) EL. 13 - R= 75% X 3 USM  - C&P as NRL - Place in center- move layer below frame layer - DS & TR
6.) EL. 15 -- C&P as NRL - Place on left side - move layer below tube - DS & TR
7.) EL.10 - C&P as NRL - Place on top - DS - move layer below frame- dup. - move this to top of frame, with eraser go around saying- wherever the other elements are - TR- & DS bottom layer
8.) EL. 21 -R =65% & 80% USM - C&P as NRL - place on corner of star - free rotate - right - 25% - DS & TR
9.) EL. 26 - R=80% X3 -USM- C&P as NRL - place on bottom center - DS
10.) EL. 35 - - C&P as new Image - dup. it as many different colors you wish - close all but the 2nd one - while it's open - selection float - de-float - go to = adjust - color balance - manual color correction -click on the source tag which you need to change to your color on 1st one. = F21E47-- on the duplicate - find a color of your choice, I'm using Purple - 6E2EDb6 H/184... S/152 (with all colors its better if you check your Hue and Saturation and then colorize ) as you can see from my examples found in my supplies. I did these colors
    A.) Light Blue - 27B2C7 - H/ 132 - S/171
B.) Dark Blue = 0000FF- H/169 - S/255
     C.) Light Green = A2CD45 - H/55 - S/ 147
                    D.) Yellow = FFFF40 - H/42 - S/255
E.) Red = 000000 - H/ 255 - S/255
When your doing your colors, if you get done, select none, and  resize all layers - 65% X 2 USM - - C&P as NRL -- Add all over the place - DS & TR
11.) EL. 37 -R=50% USM  - C&P as NRL - place below frame layer - and below all others beneath the frame -DS & TR
12.) EL.11 - R = 50% USM - - C&P as NRL -place on frame , left side -  move layer below tube layer-- DS & TR
13.) EL. 27) R = 75% USM - C&P as NRL -Place on bottom right - DS & TR
14.)   EL. 20  - C&P as NRL -place on top right -- DS - dup. mirror -flip TR- close off bottom- Merge Visible all layers - R =56% = 504 X504
15.) Paper 1 - ( or one of your choice)  - C&P as NRL - Add a mask of choice  - delete mask - yes - ungroup layers, then crop it- Merge Visible all layers - - Then add all Copy rights and name- save as PNG
Thanks for sticking with me..
Hugs
Angie

Tuesday, March 15, 2016

Lucky Charm PTU

I wrote this Tutorial, any resemblance to others is purely coincidental. This Awesome St. Patty's kit is called : "Lucky Charm" By Black Widow Creationz and can be found Here

The Artist is by Tom Hoover and can be found Here

Filters = MuRa's Meister - copies

Drop Shadow = DS= 2,2,50,5 black

Lets Begin

900 X 900

1.) EL. 28 Resize = R = 50% & 80% X 3 - Unsharp Mask = USM-- Copy and Paste = C&P as New Raster Layer = NRL - place in center and rename "Frame"

2.) MM -copies - Encircle 10, 54, 54, 0, 100, -25, 100, 0, 100, 0, 0, 30 ,0 ,

EX.1

3.) with Magic Wand click on inside of frame - Selection -modify , expand X 5 -

4.) Paper 9 - C&P as NRL- place over frame - Invert on Frame and delete on paper - select none - move paper layer below frame - DS

5)EL. 3 - C&P as NRL- Place it on top - Center - DS

6 .) Tube- Place on left side of circle - duplicate = dup. - blur- Gaussian 6 - Blend Mode = soft light - merge down = MD = DS

7.) EL.16 -- C&P as NRL-Place under frame and on top of paper- mirror and R = 80% - DS

8.) EL. 17 - R = 70% sharpen - C&P as NRL- place on right side bottom - DS

9.) EL. 18 - C&P as NRL- Place on top right - move layer below paper - dup. and mirror- DS both & Tag Reference = TR

10.) EL. 26 - C&P as NRL- place on bottom layer right side- move layer below tube layer - DS & TR

11.) EL. 40 - C&P as NRL- Place on left side- move layer below tube- DS

12.) EL. 27 - R = 50% USM - C&P as NRL-place on bottom left side - Free rotate- left 25 - DS & TR

13.) EL. 33 -R = 50% X 2 & 80% USM - C&P as NRL- place on paper -DS - dup. R - 80% place around paper layer-(do as many as you wish. MD layers)

14. EL. 32 -R = 50% X 2 & 80% USM - C&P as NRL- place on paper -DS - dup. R - 80% place around paper layer-(do as many as you wish. MD layers) TR

15.) EL.19 - R = 80% X2 USM

Saturday, February 20, 2016

Seduction PTU

I Wrote this Tutorial, any Resemblance to others is purely a coincidence.

Please do NOT add this to any Website, Group or Forum without my permission.

The Tube I am using is by Barbara Jensen and can be found Here

The kit I am using is called "Seduction" by Kandii Popz and can be found Here

Drop Shadow = DS = 2,2,50,5 black

900 X 900

Let' begin

1.) City - Copy and Paste = C&P as New Raster Layer =- NRL - Place in center - DS

2.) Tube - C&P as NRL - Place on left side of city. Duplicate = Dup. and then Blur- Gaussian 6 - Blend Mode = Soft Light - Merge Down = MD - DS

3.) Wire Fence - C&P as NRL - place on right side - move layer above bottom layer - DS

4.) Stars 2 - C&P as NRL -place on top right corner - DS - move layer above fence layer - Dup. - mirror - flip & MD

5.) Heartbeat - C&P as NRL - place right below tube-mirror - on bottom - DS - Dup. & mirror and place together- Tag Reference = TR - MD - place right above tube..

6.) Boots - C&P as NRL - place on bottom right, DS

7.) Glasses - C&P as NRL - place on right side bottom, in front of boots. - DS

8.) Hearts - C&P as NRL - move to left side - move the layer right above bottom layer.. DS & TR

9.) Bracelet - Resize = R - 60% - Unsharp mask = USM - C&P as NRL - place on center bottom - DS -

10.) Lippy - R = 60%- USM - C&P as NRL - place next to bracelet - DS

11.) Cuppy - R = 80 % - sharpen - C&P as NRL - Place on left side bottom - DS &TR

12.) Dog - C&P as NRL - Place on left side front - DS & TR

13.) Nail Polish - R= 80X2 - USM - C&P as NRL - place next to lip stick - DS & TR

14.) Flower 1 - R= 80% X2 - USM - working on the fence line - C&P as NRL - place on top right corner. DS & TR - Dup. R= 80% - Move over. you can do this for a lot of flowers, just by duplicating and then layer them around, resize some-when happy. MD 15.) Ribbon 1 - C&P as NRL - Place over wire area - DS

16.) Ribbon 2 - C&P as NRL - place below other ribbon - DS & TR - MD

17.) Skull 1 - C&P as NRL -Place on top center - DS & TR - move layer right below tube layer.

18.) Skull 2 - R = 75% & 80% - USM - C&P as NRL - place on center left - DS & TR

19.) Stars - C&P as NRL - Place layer below tube layer- DO NOT DS - TR

20.) Butterfly - R = 60% USM - C&P as NRL - place on upper left side- Free Rotate - left - 25 - DS - Dup. -. Mirror

21.) Lips - R = 80% USM- C&P as NRL - Place wherever you want - DS

22.) Close Bottom layer- Merge Visible all layers -

23.) Sparkles - C&P as NRL - place it above merged layer - NO DS- I placed mine on upper left top - R- 56% = 504 X 504

24.) Paper 4 ( Or one of choice ) C&P as NRL - place it above bottom layer- add mask of choice- delete mask and ungroup layers - open bottom layer and then Merge visible all layers.

25.) ADD ALL Copy right info and your name - save as PNG.

Thanks for taking a look

hugs

Angie

Thursday, February 11, 2016

MY Sweet Girl 2 PTU Forum style & Avatar

I Wrote this Tutorial any resemblance to others is purely coincidental. Please do NOT add this to any Website, Forum or Group without my Permission.

The Kit I am using is called " My Sweet Girl" by Black Widow Creationz and can be found Here

The Tube I am using is by Barbara Jensen and can be found Here

My Examples Here

Filters = MuRa's Meister - Copies

Drop Shadow = DS = 2,2,50,5 black

650 X 250

1.) Tube - Copy and Paste = C&P as New Raster Layer = NRL - Duplicate = Dup.-- rename dup1 & dup2- close #1, on #2- dup - on dup. - adjust-blur-Gaussian 6 - Blend Mode = hard light - opacity - 80% merge down = MD - DS - dup. - mirror and space evenly apart - Tag reference = TR - MD - crop opaque -close

2.) Open #1 tube layer- bring tube up to show the teddy bear- MM Copies - Wave ( vertical ) V wave wraparound - behind - 15 - 20 - 100 - 0- -10 - 0 - 100 - 0 -0 -0 - 30- 0 - EX.1 -- dup. 2X - move to right side and 1 to the left side - TR -close bottom and then MV. the 3 layers -- opacity 70%

open #2- move this to top layer-

3.) Working on top layer-- EL.11 - Resize = R =70% X2 and 80% Unsharp mask = USM -~C&P as NRL ~ Place on right side - Free rotate left 30% - DS and Tag reference = TR

4.) EL. 16 - R = 70% X2 USM -~C&P as NRL ~Place between tubes - DS - TR - Dup.- R = 70% - place on left top - TR

5.) EL. 15-R= 60% & 80% X 3 USM ~C&P as NRL ~ Place on bottom Left--DS

6.) EL. 13 - R = 60% & 80% - USM --~C&P as NRL ~ Mirror - place lower right side- DS & TR

7.) Get a color from your tube I used (D13557 246/160/131 ) With magic wand - click on the inside of Lipstick=Selection- modify - expand X5- add NRL and then Flood fill with color. Select None = SN. - With Freehand Selection tool - go around the top of Lipstick - (EX 2-1, 2-2, 2-3 ) go to Inner bevel -2,8,0,20,0,0 (color from tube) 315, 50,30 - ok - SN - Merge Visible = MV - -~C&P as NRL ~R= 60% & 80% X 3 - USM - place next to purse - DS

8.) EL.24 - -~C&P as NRL ~ place layer above merged layer - DS

9.) EL. 37 - R = 80% - sharpen - -~C&P as NRL ~ place on top center- DS & TR

10.) EL. 36 - R = 50% & 80% X2 - USM -~C&P as NRL ~ place on bottom left - DS & TR

11.) EL. 38 - R = 50% X2 & 80 USM-~C&P as NRL ~

place on flower stem

12.) close the lady bug - and then MV all layers - open ladybug.

13.a.) If you don't want to animate, just MV all layers including the Ladybug..

Add all Copy right info, including your name and then save it as a PNG

13.b.) to animate - On a NRL - add all Copy Right info as well as name... let's Animate

Open Animation shop ~~ copy merged and then paste into animation shop as New animation

PSP:

Dup. Ladybug ~rename Ladybug 1 and Ladybug 2~~Ladybug 2 ~~ Move it up a little, ( or as high as you wish) Close Ladybug 1 - copy merged - and paste after current frame, continue doing this till you have them all . when happy click on the 1st frame : selection - frame properties;

then save it as Gif.

Avatar

Cut out a section of tag 150 X 150 - you can either use your Crop tool or freehand selection tool.

**** Remember if you use a tube -- ADD your Credit to the Artist ****

Also if you use a Scrap Kit it is nice to credit who made that kit.

Unless the kit maker asks you to credit them

Have fun,

hugs

Angie

Sunday, January 31, 2016

My Sweet Girl 1 PTU

I Wrote this Tutorial, any resemblance to others is Purely a coincidence.

Please do not add this to any Website, Forum or Group without my permission.

This cute Girl Kit is called "My Sweet Girl " By Black Widow Creationz and can be found Here

The tube I am using is by Jamie Kidd and can be found Here

Examples ; Here

Filters = MuRa's Miester = Copies

Just scroll down till you come to the The file.

Drop Shadow = DS = 2,2,50,5 black

Let's begin:

900 X 900

1.) EL.16 - ( Grab a color from tube, we will use that to color the flower....) Copy and Paste = C&P - as New Raster Layer = NRL - place in center of tag ...with magic wand click on inside of flower .....add NRL .......go to selection - modify - expand..= 6 --flood fill flower - Select none = SN ...- move layer below flower - do the same for leaves and stem - and center of flower- -the colors I used are -- dark green = 008000 -- light brown = 88450b -- center of flower = c00000 ...--when done close bottom layer and merge visible = MV -- now`~~ open Resize = R ~ =80% - sharpen ~~ duplicate = dup. ~~ close this one - on original - using Mura Meisters Copies~~ - Encircle ~~ Circle ~~ tile mode ~~ behind~ 8 ~50~50~0~100~ -25 ~100~0~100~0~0~30~0~ ok. EX.1 ~ Repeat with other flower - now merge down - tag reference = TR - EX.2

2.) With Magic Wand .~ click in center of flowers - selections~ Modify ~ expand 5 - Paper ~ I used Paper 5 ~ invert on frame ~ Delete on paper-- Select None = SN. ~~ move paper below frame - DS ~~ both.

3.) Tube - C&P as NRL~ place on left side of the frame - Dup. ~ Blur ~ Gaussian 6 ~ Blend Mode ~ Soft Light - Merge Down = MD -- DS

4.) EL. 1 ~ C&P as NRL~ place in front of tube~ move it over some ~ cut off one side using freehand selection tool ~ point to point ~ add shift ~ feather = 0 ~ smoothing = 0~ anti - alias ~ checked - I always crop opaque - 900 X 900 - to make sure you have a clean cut - EX. 11 and EX. 12 - dup. - flip and merge together.

5.) EL. 11 - R = 70% X2 = Unsharp Mask = USM - ~ C&P as NRL~ place on top right- free rotate - Left 30 - DS

6.) EL. 15 - R = 70% X2 -=USM -~ C&P as NRL~ Place on bottom left - DS&TR

7.) EL. 13 - R = 80 % - sharpen ~ C&P as NRL~ mirror - place on lower right side - DS&TR

8.) EL. 14- R = 80% X 4- USM. ~ C&P as NRL~ place on bottom left side --DS&TR

9.) EL. 24 - ~ C&P as NRL~ flip - place on bottom front- move layer to above the bottom layer - DS - TR - dup. & flip.

10.) EL. 37 - ~ C&P as NRL~ Place top center--DS&TR

11.) EL. 40 - ~ C&P as NRL~ Place on upper left - DS

12.) EL. 8 - R = 60% - USM ~ C&P as NRL~ Place on right center - DS&TR

13.) EL. 36 - R = 60% & 89% -~ C&P as NRL~ place on bottom left - DS&TR

14.) EL. 32- R = 50% & 80% - USM - ~ C&P as NRL~ Place on right side bottom- DS&TR

15.) EL. 3 - R = 50% USM ~ C&P as NRL~ Place on bottom center - DS&TR

16.) EL. 28 - R = 50% USM ~ C&P as NRL~ Place center left side - DS&TR

17.) EL. 33 - ~ C&P as NRL~ Place on right side - above bottom layer - mirror - DS&TR

18.) EL. 34 - ~ C&P as NRL~ Place left side - DS & TR - place right above layer 17.

19.) EL. 38 - R = 50% & 80% X2 USM ~ C&P as NRL~ place in center of flower - free rotate - left 25% - DS & TR - Dup. - free rotate to right 25%

20.) Close bottom layer and MV. all other layers - R = 56% = 504 X 504 - add a paper of choice , I chose P5- place above bottom layer add a mask of choice- crop opaque- when happy open up bottom layer and MV all layers again.

21.) ADD ALL CR info - name and then save as PNG.

I hope you had fun. Thanks

hugs

Angie

Sunday, January 17, 2016

Fantasy Land PTU

I Wrote this Tutorial, any resemblance to others is purely a coincidence. Please do NOT add this to any website, Forum or Group.

This cute Fantasy kit is called "Fantasy Land" by Black Widow Creationz and can be found Here

The Tube I chose is by Kenny Kiernan and can be found Here

My Supplies Here

Scroll down till you find " Fantasy Land "

Drop Shadow = DS= 2,2 50 ,black

2 Tubes

Let's begin

900 X 900

1.) EL. 39 - Copy and Paste = C&P as New Raster Layer = NRL- place it in center of canvas - DS

2.) P 4 ( or one of your choice ) with Magic wand - click on the inside of frame - selections - modify - expand X12- invert on frame and delete on paper- move paper below frame ,and DS - Select none = SN

3.) EL. 14 - C&P as NRL - move layer below the paper layer, and move it up to the upper right corner - DS - Tag Reference - TR

4.) EL. 12 - C&P as NRL - Place on left side - DS & TR

5.) EL. 22 - C&P as NRL - place on left bottom - DS & TR.

6.) Tube 1- Resize = R - (if needed) C&P as NRL - Place in center of frame- place layer below frame - Duplicate = Dup.- Adjust- blur- motion - Angle =131 - Strength = 38 - Blend Mode = BM = Soft Light - Merge Down = MD - DS & TR

7.) Tube 2 - (R if needed) - C&P as NRL - place on the right side of frame - Dup. - adjust- blur- Gaussian 6 - BM = Soft Light - MD

8.) EL. 21 - R = 56% Unsharp mask = USM - C&P as NRL - place below frame and in front of Tube 2 - DS & TR

9.) EL. 20 - R = 75% USM - C&P as NRL - Placed on upper right corner - move layer right above cloud - DS & TR

10.) EL. 23 - R = 75% X 2 - USM - mirror - C&P as NRL - place on right side - & move below tube 2- DS & TR

11.) EL. 24 - R = 56% - USM - C&P as NRL - place on left side - move layer right above bottom - free rotate - left 30 - DS & TR

12.) EL. 38 - R = 56 % - USM - C&P as NRL - place on bottom next to castle - DS & TR - Dup. - R = 80 % - place this one next to the other - MD

13.) EL. 37 - Flip - C&P as NRL - place on bottom left - move layer below castle - DS & TR

14.) EL. 40 - R = 80% - USM - C&P as NRL - Place in front of castle - DS & TR

15.) EL. 42 - R = 60% - USM - C&P as NRL - place in front of flowers - center - DS & TR

16.) EL. 31 - R = 60% X2 - USM - C&P as NRL - place on right bottom, in front of magic wand - Dup - R = 80% - mirror- and place it next to other- MD - DS & TR

17.) EL. 13 - C&P as NRL - place on star - with freehand selection tool - point to point - add shift - feather = 0 - range = 10 - smoothing = 0 - anti - alias - checked. - go around the section as in EX. 1 & 2 in my supplies - delete - SN - DS & TR

18.) EL. 34 - R = 60% - USM - C&P as NRL - place on left side top - DS - Dup. - R = 80% - mirror - place on bottom right side - TR

19.) Close out bottom layer - now R= All layers 56% - sharpen = 504 X 504

20.) P 5 - ( or one of your choice ) - C&P as NRL - make sure its above the bottom layer - add a mask of choice - delete mask - ungroup layers - crop opaque - open bottom layer, and then Merge Visible -

21.) Add all Copy right info, your name - and save it as a PNG.

Thank you for checking my work.

Hugs

Angie

Tuesday, December 29, 2015

Silver Bells 2 PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence.

Please Do Not add this to any Forum, Website or Group.

The kit I am using is by Cari at Black Widow Creationz it's called " Silver Bells 2 " You can find it Here

The Tube I chose is by Jasmine Beckett-Griffith and can be found Here

My Examples -Here

( Just scroll down )

Filter : VDL Adrenaline

Drop Shadow = DS = 2,2,50,5 black

Let's begin

900 X 900

1.) Tube - (resize = R - if needed ) Copy and Paste = C&P as New Raster Layer = NRL - and place on the bottom of tag - (we're going to work around the tube ) DS

2.) EL 11 - C&P as NRL - Place on top right corner-- DS

3.) EL 12 - C&P as NRL - place on the bottom of your moon, making it look like it's hanging off...DS

4.) EL 14 - C&P as NRL - place on upper left and move layer to above bottom - DS

5.) EL10--R= 70% - Unsharp Mask = USM -C&P as NRL - place on bottom right corner - DS

6.) EL 21 - C&P as NRL - free rotate left 90% - Place on bottom of tag - DS & Tag reference = TR

7.) EL 23 - R = 70% - USM -C&P as NRL - place on top left - free rotate left 25% - DS - Duplicate - mirror- move this to other side of star- duplicate and flip - move layer below tube- duplicate #2 - mirror - make sure bottom 2 are under the tube, and above the star - TR - merge them all together -

8.) EL 24 - R= 70% & 80% - USM --C&P as NRL - Place on left side - move layer below frame (NO DS) - TR

9.) EL 25 - R = 60% & 80% - USM -C&P as NRL - place it above the tree on right side - DS

10.) EL 29 - -C&P as NRL - Place on right side bottom- DS - Move layer below tube - TR

11.) EL 33 - -C&P as NRL - Place on left side - DS - move layer below tube layer - TR

12.) EL 34 - -C&P as NRL - place on right top - move layer below tree layer - DS & TR

13.) EL 36 - R = 60% - USM - -C&P as NRL -- place on top left - move layer below star - (NO DS) Erase any over hanging (for animation)

14.) EL 4 --C&P as NRL -place behind sign - DS & TR

15.) EL 45 - R = 40% USM - -C&P as NRL - place on left side bottom - DS & TR

16.) EL 5 - -C&P as NRL - place in front of sign - DS & TR

17.) Close out all layers above sky- and close off bottom layer - You should have - leaves, star, snowman and tree - with freehand selection tool - Point to point - add shift - feather 0 - smoothing 0 - go around the star- Examples 1,2,3

18.) Go around star and on bottom layer add NRL-

with flood fill tool- add this color - 93aaca ( rename this background ) Duplicate 3 X's = 4 - select none- close out all layers from leaves to bottom

19.) With all layers above - open then Merge Visible --rename Top

20.) Add Copy right info (If you don't want to animate- merge visible all layers, R= 56% = 504 X 504-sharpen - add name and save as PNG )

Let's animate

21.) Close top and open Leaves, star, snowman and tree - Merge Visible and rename it Star- R = 56% - 504 X 504 - sharpen

A.) rename star background 1,2,3,4- with freehand selection tool - same setting as before - go around star again this time keep it selected.. make sure star background 2,3, & 4 are closed.. working on Star background (St.bkg) 1 - go to VDL Adrenaline - snowflakes - Ex.4 - Amt. 100 - size range - Beg.=7, end = 22 - hardness = 80 - Transparency = 20 - basic snow - random seed - 0

close St.bkg 1 open #2 - random seed = 20 , close #2 open #3 - random seed =40 - close #3 - open #4 - Random seed = 60 , Select none....

close #' s 2-

Open Animation Shop

on #1 - copy merged - in AS -paste as new animation

PSP - close #1, open #2 - in AS - paste after current frame - repeat for #3 and #4 - when done, go to 1st frame - edit- animation properties - opaque = white

and then frame properties - 35 -for all frames

save as GIF after you add your name.

Thank you for following me.. I really would like to see any creations.

Hugs

Angie