Throw Me Something Mister (FTU)

I wrote this tutorial, any resemblance to others is purely a coincidence. Please Do NOT place this on any Website, Forum or Group, without my permission..

This Awesome kit is by Doris at Scrap Dimensions her site is Here 

The Awesome Party tube is by Elizabeth Austin her Art,can be found Here  
Drop Shadow= DS= 2,2,50,5 black
Let's begin:
800X800
1.)  MO-over5s--Copy and Paste=C&P as New raster Layer= NRL--place on bottom right corner of canvas--DS--duplicate= dup.. and mirror then flip..make sure this one is in the upper left corner of canvas--Merge Down = MD--Tag Reference = TR
2.)  MG-Beads-close off 2 layers --copy Merged- and place 1 as a NRL--Resize= R=80% --sharpen-unsharp mask--close #1,open #2-repeat and repeat for #3, once you have all 3 beads on your canvas--DS and then  place them where you want.. I copied mine and R-them as well..Do as you wish this is only a guide.
3.) Crown--R = 60% & 80%--unsharp mask-C&P as NRL--place on left top--DS--TR
4.) Coins--R=50% -- unsharp mask-- C&P as NRL--place on left side bottom of canvas--DS--dup.--R =80% place  a little toward the middle--TR
5.) Feather 4--R= 40%-- unsharp mask- C&P as NRL-- place on top right side--DS--TR
6.) Feather 5 --R= 40%-- unsharp mask- C&P as NRL-- place on top right side--DS--place this one a little lower than the 1st. TR
7.) Feather 6 --R= 40%-- unsharp mask- C&P as NRL-- place on top right side--DS-- place this one a little lower than the 2 nd. TR
8.) Fireworks 1- C&P as NRL--DS--and place, on upper left side of tag- move this  layer below the crown layer--dup. = 80%--sharpen--move down to the right bottom corner--TR
9.) Flute-- C&P as NRL-- place in the upper right corner--DS--TR
10.) Mask 1 --R= 75 % X 3-- unsharp mask-- C&P as NRL--place in upper right side--DS--TR--free rotate Right 25
11.) Note 1-- R = 75 % sharpen-C&P as NRL-- place on bottom--move layer above bead layer--DS--TR
12.) Light-C&P as NRL-- Place in the middle of canvas--DS
13.) Sax--R= 75%--sharpen-- C&P as NRL--place on middle right side of tag--DS--TR
14.) Mask--R = 50%-- unsharp mask--C&P as NRL-- place on lefy side middle of tag.--DS & TR
15.) Tube--one of choice-- R=(if needed- sharpen as well--) C&P as NRL-- place on the left side of light--dup.--blur--gaussian--6--Blend Mode =overlay--Opacity = 80%--MD
16.) Close   background-- then merge Visible all layers-
17.) Paper 6-(or one of your choice) open background layer and on this layer-- C&P --paper--as NRL--Add a Mask of your choice--delete mask--and then ungroup layers--crop--opaque--
18.) Now Merge Visible all layers--R = 63% -- then add ALL Copy Right Info.
Thank you for surfing my site...oh yeah on a quick note:Here is a meaning for the 3 colors they use during Mardi Gra's  -
Purple Symbolizes = Justice
Green   Symbolizes = Faith
Gold/Yellow Symbolizes = Power
Just found this out,kinda neat,,Huh?
Have fun... Hugs
Angie  
 
 

  

With all My Heart PTU

I wrote this tutorial,any resemblance to others is purely a coincidence. Please DO NOT add this to any Website,Yahoo-group, or Forum,without permission from me.

This very Beautiful tube is by Seven and you can find it Here

This Awesome kit is called"With all my Heart", Thank you Cari for letting me use this. If you'd like this kit,you can find it at her store Here  

Let's begin

Drop Shadow =DS= 2,2,50,5  black

800 X 800 

1.) EL 42--Copy and Paste= C&P as New Raster Layer= NRL--with magic wand--click on inside of frame--selections--modify--expand 15

2.) P9 (or one of your choosing) C&P as NRL---Invert on frame and delete on paper- crop opaque if needed.

3.) Tube --C&P as NRL-right below the frame layer-- with magic wand -click inside frame- then on frame layer-invert-on tube delete- DS both.

4.) Duplicate tube--adjust-blur-gaussian-5--Blend Mode=Soft light-Opacity= 70--merge down-DS-Tag reference= TR

5.) Now we are going to set it up to animate--Close out Tube and frame layers--on Paper layers- duplicate 2X's = 3 layers--I renamed mine-noise1,2,n 3. Close out 2 & 3, working on #1--with magic wand-click inside different pieces on the paper.I did all the hearts.. ex.1 and ex 2

 once done,go to adjust--add/remove noise- these settings--add noise-uniform 40 -- Monochrome checked'

close 1,open #2 and change the # to 50,'

repeat for layer 3 but change the # to 60--select none

close layers 2 and 3--go back to top--tube layer--

on mine I also added glitter to her make-up with these settings-- uniform-20,30,40--SN,

6.) EL 26-C&P as NRL-----place on left side of tag--Ds

7.) EL 20--Resize=R=70%--sharpen-- C&P as NRL---place on upper right side--DS--TR

8.) EL 14--R=50%--sharpen--unsharp mask---- C&P as NRL---  place on right side - DS-

9.) EL 21-- C&P as NRL--- place on upper left side--DS--duplicate and place it around canvas--TR

10.) EL 29 -- C&P as NRL---DS--place on left side of frame-with raster deform tool or (pick tool) move the flower a little..TR

11.) EL 30-- -- C&P as NRL---  DS--place on left side of frame,and place it beneath the other flower,,DS...and Merge down  TR

12.) EL 23 --R= 50 % & 80% X2--unsharp mask-- -- C&P as NRL---  place in center front.

13.) EL 24--R 70% -- C&P as NRL---place on mailbox--DS

14.)  EL 6---R=50%-- unsharp mask -- C&P as NRL--place on the right side middle of canvas--DS--TR

15.) EL 3 -R= 50% --unsharp mask- -- C&P as NRL--- place on the left side of heart on bottom--DS--TR

16.) EL 39-R=50% & 80% X2-unsharp mask-
-- C&P as NRL-- place on bottom-right side of love heart--DS--TR

17.) EL 40-R=45% & 80%X3-unsharp mask-- C&P as NRL--place next to other one--DS--TR

18.) EL 38-R= 45% & 80%--unsharp mask--- C&P as NRL---place it in front of cupcake on left bottom--DS--TR

19.) EL 37-R=45% & 80% X2-unsharp mask -- C&P as NRL---  place it above the other candy.DS-TR

20.) EL 2 - R = 50% & 80% X2--unsharp mask- -- C&P as NRL---place the kiss in center on top of frame--free rotate-left 25--DS--TR

21.) EL15-R=40% & 80%-- unsharp mask---- C&P as NRL---  place it on right side of the frame,DS -TR-free rotate-left 25--duplicate-R = 80% --mirror--place below the first one.--TR

22.) Close out all layers below frame--merge visible the ones from frame and up.

23.) add a paper to the bottom and add a nice mask--delete mask in your layer pallette--ungroup layers

24.)Once happy--R=63% all layers-add All Copy right info and name..if you don't want to animate,(open all layers and merge visible...save as PNG)

Let's Animate

Open Animation shop

make sure #1 noise is open,copy merged--and paste into animation shop as new animation.

PSP--close #1--and open #2--repeat above and do the same for #3.

when finished you will have 3 layers, since I don't know how to save it with a transparent background, so I add a white one..to do this, go to Edit-Select All-go to animation and scroll down to animation properties--go ahead and check the opaque button--and choose white-

while the frames are still active--go to frame properties and change this to 15..

View your animated tag, and once happy save it as GIF,

Thank you for doing my tutorial,

Hugs

Angie

PS.. here is another tag I did, its a PNG--different tube and moved the elements around!