March PTU

I Wrote this Tutorial, any resemblance to others is Purely a coincidence.

Please do NOT add this to any Forum, Group or Website, without my permission.

The Art I am using is by PinUpToons and can be found Here  

This Beautiful Kit is by Betty at WhiteMyst Designs and can be found Here

Drop Shadow = DS = 2,2,50,5 black

Lets Begin

900 X 900

1.) Tube = copy and paste = C&P as new raster layer = NRL -- duplicate = Dup - Adjust - blur - Gaussian 6 - Blend Mode = BM = Multiply - Opacity = OP --90% - Merge Down = MD -- DS

2.) I 48 - C&P as NRL - place beneath the tube layer- DS - tag reference = TR

3.) I 49 -C&P as NRL - place beneath the city background - DS & TR - Dup. - mirror

4.) I 45 - C&P as NRL - place beneath the tube layer--DS - TR

5.) I 50 - Resize = R - 50% - C&P as NRL -sharpen - Unsharp mask = USM - place on top right - DS & TR
6.) I 11 - R = 50% - C&P as NRL -USM - place on lower right corner -- DS & TR
7.) I 10 - R = 50% - C&P as NRL -USM - place next to cupcake - DS & TR
8.) I 13 - R = 50% - C&P as NRL -USM - place top left side - mirror - DS & TR
9.) I 14 - C&P as NRL - put on left bottom - DS & TR
10.) I 2 - R = 50% -  C&P as NRL -USM - place center bottom - DS & TR - Dup. - R = 80% - sharpen - move next to other.
11.) I 30 - C&P as NRL -place on left side - move layer right above the star layer - DS - Dup. - Mirror & MD
12.) I 6 - R = 50% - C&P as NRL -USM - place on left bottom - 
13.) I 17 - C&P as NRL - place it on top center.
14.) after done I added the dates - DS & TR
15.)I 18 - C&P as NRL - place layer beneath fruit layers -- DS & TR
16.) I 24 - R = 50% & 80%-C&P as NRL -USM - place on center left -- free rotate - 25 - DS & TR - Dup. - mirror - move to lower right side.
17.) I 1 - R = 50% X 3--C&P as NRL -USM - place on bottom layer --DS & TR - Dup. R = 80% sharpen --mirror and place on top right.
18.) I 3 - R = 50% -C&P as NRL -USM - place on lower right side - DS & TR
19.) I 38 - R = 50% -C&P as NRL -USM - place on lower bottom center - move layer below cupcake - DS & TR
20.) Close bottom layer - and Merge Visible all other layers - R = 56% = 504 X 504
21.) P - 6 ( or one of your choice ) C&P as NRL - Add to bottom layer -- add mask of choice - delete mask -ungroup layers and then crop- opaque  
22.) Add all Copy Right info and then your Name - save as PNG.
Thank you for viewing my Tutorial,
hugs
Angie
Other view without banner

 



Cappuccino Dream PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence. Please do NOT add this to any Group, Website or Forum , without my permission.

This awesome Green and Brown colored kit is called 

" Cappuccino Dream " and is by Cari at Black Widow Creationz you can find it Here

The Tubes I am using are by PinUpToons and you can buy them Here

My Files Here

Tubes = 2-3 tubes of same artist, or 1 large or 1 full

Filters - Eye Candy 5 Inpact - glass

Drop Shadow = DS = 2,2,50,5 black

 Let's Begin

900 X 900

1.) EL. 1 - Copy & Paste = C&P -- As New Raster Layer = NRL-- place in center

2.) Paper 7- with Magic wand -- click in center of frame - selections - modify - expand 10 -- C&P paper as NRL - invert on frame and delete on paper - move paper below frame -- DS - both

3.) Frame 8 -Resize = R -75% --sharpen -- unsharp mask = USM-- C&P as NRL - place it above the other frame. (center) tag reference = TR

4.) With 1st tube -  - C&P as NRL - place it below the 2nd frame- and on top of paper -- TR -- Duplicate = Dup. -- Blur - Gaussian 6 = Blend Mode = BM = Multiply , Opacity = OP. =  90% - Merge Down = MD -- delete any part of tube going under the edge of frame -DS on tube

5.) With Lasso tool - go around the top frame -- EX. 1 -- select - modify -- expand 6 -

6.) on active frame - go to EC5 impact -- glass -- use these setting -- as seen in EX. 2-- TR

7.) Close out bottom layer and Merge visible = MV -- all layers and rename it frame -- move slightly to the top. TR.

8.) EL. 14 -- C&P as NRL - mirror and place on left side -- DS -- Dup. and flip -- put this on bottom layer.

9.) EL. 12 -R = 75% USM --- C&P as NRL - place on the bottom in front - DS --TR

10.) Tube #2--- C&P as NRL -place in front of coconuts-- Dup. - Gaussian blur 6 -- BM -  soft light - OP = 90% --MD--DS--TR

11.) EL 20 --- C&P as NRL - place on top left side -- move below frame -- DS & TR

12.) EL.27 - R = 60% & 80% --USM -- C&P as NRL -place on top right-- DS --TR -- Dup. - R = 80% = move down some - TR - Dup. & R = 80% again ( you can add more if you like, just dup and place them around.. you might even resize them as you go )

13.) EL. 26 -R = 50%-- USM -- C&P as NRL - place center bottom - move layer to right above bottom layer. DS & TR

14.) EL. 30 --R = 50% X 2 --USM -- C&P as NRL - place on left side in front of tube--Dup. -- R = 80% -- move next to coconut- I placed a few around -- TR.

15.) EL. 35 -- C&P as NRL -place right above the bottom layer.. DS & TR

16.) EL. 36 - - C&P as NRL -place this above the leaves -- DS & TR. -Dup. and move this right above the frame holder -- EX.3 & EX.4-- close your layers -- if you need to- now we are going to clean up the frame -- so it looks like it is sitting on the holder. TR

17.) EL. 7- R = 80% USM - C&P as NRL -place on bottom right- DS & TR

18.) EL. 29 - R = 50% X2 & 80%- USM - C&P as NRL -place in front of the 2nd tube-- Left bottom-DS -- (If you don't want to animate, do these following steps )

 19.) Close all Layers and Merge Visible -- R= 56% sharpen

20.) Paper of choice - I used PP3 -- add mask of choice -- delete mask -- ungroup layers -Crop-- opaque -504 X 504 -- Now open bottom layer and Merge Visible -- Add All Copy Right info, and Name then save as png.

If you want to animate do the following steps.

1.) To Animate-- go back to step # 18 -- with Lasso tool - go around the flame --ANI--EX.1 -6

2.) Dup. 3 X = 4 layers

3.) EC5- Nature - smoke- these settings-

small - steaming coffee

Basic - checked - wispy - smoke direction -99

Column Length- = 75

Puff size = 20.18

Expansion = 10

Waver = 37

Roughness = 60

Overall Opacity =  78

Random Seed = 1

Save

4.) on the rest of the layers -hit Random Seed - 1X for each layer

Once done select none, close off all layers except for #1. -

 Copy paste- paste into animation  shop as new raster layer - close original - continue to do this until you have all 4 layers done -- paste into animation shop - as NRL - when done check your frame settings and change them to = 30

now select all and go to animation properties- on frame 1 - edit - select all and go to - animation properties and add opaque - when happy save as Gif

Thank you for going this far. the Non-animated one is below

Hugs

Angie