Cafe PTU

I wrote this Tutorial any resemblance to others is purely a coincidence. Please do Not add this to any Website, Forum or Group without my permission.

This Tube I am using is by Ismael Rac and can be found  Here

And this kit is called : " Cafe " by Black Widow Creationz  Here

My Supplies : Here

Drop Shadow = DS = 2,2,50,5 black

Filter used : Mura Meister Copies

900 X 900

1.) EL. 32 - Resize = R 50% Unsharp Mask = USM --  Copy and Paste = C&P as New Raster Layer = NRL-- make sure its in the center. Filters - Mura Meister Copies - with these settings : Circle - tile mode - behind--encircle -14,50,50,0,100,-25,100,0,100,0,0,30/,0,ok ,EX1..flip

2.) With Magic Wand - click in center of leaves - selections - modify - expand 20 ok

3.) Paper 9 (or one of your choice) C&P an NRL - place on top of leaves - invert on leaves - delete on paper- Select None= SN - place paper below leaves - DS both - crop opaque if needed

4.) Tube - C&P an NRL - R if needed-= 50% &  80% X2- USM -

Duplicate = Dup. - blur - Gaussian - 6 - Blend Mode = BM- soft light - opacity = 100% - Merge Down = MD - DS

5.) Tube - Dup. -C&P an NRL- place this one below frame layer - erase any of the tube hanging out of frame both layers -when happy - close bottom - Merge Visible = MV - rename this layer frame.

6.) EL. 31 - R = 60% USM - C&P an NRL_place on bottom center leaves-DS - Tag Reference= TR

7.) EL. 21 - R =80% - sharpen -C&P an NRL-place on left side - DS -TR

8.) EL.11-R = 70% USM -mirror - C&P an NRL -place on top of table -left side - DS - TR

9.) EL. 13 - C&P an NRL- place below frame move to top right corner - DS -TR

10.) EL. 18 -R = 50% - USM -C&P an NRL - place on other side of table - DS-TR

11.) EL. 23 - R = 50% - USM - C&P an NRL- place on bottom left side - DS &TR

12.) EL. 27 - R = 50% USM - C&P an NRL- place on bottom right side-- DS & TR

13.) EL. 29 - C&P an NRL -  place on upper left side - DS & TR

14.) EL. 35 - R = 50% & 80% - USM - C&P an NRL - Place on table - move layer below the tube - DS & TR

15.) EL. 37 - R = 50% USM -C&P an NRL- place on bottom right next to coffee beans - DS & TR

16.) El. 4 - R = 50% - USM -C&P an NRL--Place next to grinder - DS & TR

17.) EL. 5 - R = 60% USM - C&P an NRL- on right side near Coffee Beans -DS & TR

18.) EL. 6 - R = 40 % USM -C&P an NRL - place on right side beside the leaves - DS & TR - free rotate left 30- Dup. - Mirror

19.) EL. 15 - R= 40% USM -C&P an NRL - place on left bottom -  corner -DS & TR

20.) EL. 16 - R = 40% USM -C&P an NRL - place on table -move layer below cup and cupcake layers - DS & TR

21.) EL. 34 - R = 60% USM - C&P an NRL - place on bottom center -- DS & TR

 22.) Now with bottom still closed -- MV all layers -R= 56% = 504 X 504 -

23.) Now add a paper of choice I used P2- Add to bottom layer, now add a mask, delete mask and ungroup layers- - or you can do as I did and add a border-- using 2 colors from tube-go to Images - borders I added, #3 with a color that high light tag, and the next one I used #5, with a darker color- When happy, add all copy rights to your tag, now add your name and save as png.

Thanks for checking it out, the other tag I used basically the same elements, but I did move them around a bit...and I animated it..

Here is what it looks like

 

Happy Birthday PTU

 

I wrote this Tutorial, any resemblance to others is purely a coincidence. Please do not place this on any Website, Forum or in Groups without my permission. Thanks
This awesome Birthday kit is called "Birthday Party" by Cari at Black Widow Creationz and you can find it Here
The tube I am using today is from Arthur Crowe, and is called "Sexy Green Eyes"  Here
Drop Shadow = DS - 2,2,50,5 black
2 tubes - 1 close up and 1 reg.
Let's Begin
900 X 900
1.) EL 10 - Copy and Paste = C&P - as New Raster Layer = NRL - place in center
2.) P 6 - with magic wand -= click on inside of frame-selections-modify-expand x6-- C&P as NRL - place in center- invert - delete and Select none = SN - move below - DS on both
3.) EL 17 - C&P as NRL - place  in center of frame - move layer below frame- DS
4.) EL 1-C&P as NRL-place over the HB word Art and up a bit, move below frame-erase any hanging over frame, Tag Reference = TR-- DS
5.) EL 27 -C&P as NRL - Resize = RS = 50% Sharpen - Unsharp mask = USM - place on center of tag -TR & DS
6.) EL 3 - C&P as NRL- place on paper below frame- Duplicate = Dup. - mirror - place layer below WA.
7.) Close - up - C&P as NRL- place below frame- Dup.-Blur- Gaussian 6- Blend mode = BM = soft light - merge down = Md -  go around edges to make sure the tube is not hanging over - Opacity - 50% - Md
8.) close bottom layer and Merge Visible - MV - all layers - keep bottom closed- R = 80% USM - move it up a bit- Rename Frame
9.) EL 14 - C&P as NRL - move it up a bit - place below frame  layer - NO DS - TR
10.) El. 11 - C&P as NRL - place on top of frame - MD - TR - NO DS
11.) EL. 12 - C&P as NRL - move to left side - DS - Dup---mirror -MD -Put this layer below frame.
12.) Full tube - C&P as NRL- R if needed - dup. - Gaussian 6 - BM = soft light - MD - DS - place on left side - TR
13.) EL. 34 -R=80%- USM-C&P as NRL- mirror-place on right side of frame--DS
14.) EL. 26 -C&P as NRL-place on bottom right..DS
15.) EL. 25 - C&P as NRL-place on bottom right..  next to other--TR--DS
16.) EL. 31 - R = 70%- USM-  C&P as NRL- place next to candles - DS &TR
17.) EL. 32 - R=70% USM-Copy original and on your main workbench - paste as new image. then Dup. - 6X's- and pick you 5 colors, change the ribbons to the colors you want, and paste them wherever you wish, you can even dup. them and change the size.
18.) EL.1- More Streamers - C&P as NRL- place the layer below frame layers--DS - TR
19.) EL. 2-R=50% - USM- C&P as NRL-place on bottom center--DS - Dup. - R= 80% - place next to other -
20.) EL. 20 - C&P as NRL--place on top center- remove the stick with either the raster deform tool or eraser, once done-- add DS--TR
21.) EL. 24- R= 50% USM. - C&P as NRL- place on bottom next to present - free rotate Right 30- DS & TR
22.) With bottom still closed - MV all layers - R = 56% sharpen - 504 X504
23.) Add paper of choice - I used -P9-C&P as NRL- place above bottom - add a mask of choice - delete mask - ungroup layers- crop opaque
24.) Add All Copy Rights and name - save as png