Poison PTU

I wrote this Tutorial, any resemblance to others is purely coincidental.

Please DO NOT add this to any Website,Group of Forum without my permission.

This Awesome kit is by Cari at Black Widow Creationz called "Poison" and can be found Here

The poser is provided with the kit and is by Medi you can find her posers Here  

My Supplies Here 

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

900 X 900

1.) Fence 4 --Copy and Paste = C&P as New Raster Layer = NRL --- Place in Center --DS

2.) Tree 1 -- C&P as NRL --place on left side DS-- tag reference = TR

3.) Vine 1 =  C&P as NRL -- Mirror and place on right side of fence. Duplicate = dup. -- working on top layer, With your Lasso tool - with these settings: point to point -- add shift -- feathering = 1 -- smoothing = 0 --- anti-alias -- checked -- go around the vine and delete the areas where it looks like the vine is going through the fence.

4.) Vine 2 -- C&P as NRL -- place next to tree, move layer below tree layer.. DS --TR

5.) Vine 4 -- C&P as NRL -- Resize = R -80% -- sharpen -- place next to tree -- move layer below tree layer. DS -- dup -- mirror-- place on left side of other vine.

6.) Wire 1--R = 60% X 2 -- sharpen -- unsharp mask = USM-

C&P as NRL -- place on top of fence --DS--move to top - dup. and place in center of fence -- place each one ,at each bottom of X on the fence-- TR

7.) Skull 4 -- R = 60% -- USM -- C&P as NRL -- place on bottom right side -- DS--

8.) Rock 1 -- R = 80%- C&P as NRL- place on right side, move under the skull,( to where it looks like it's on top of rock ) TR--DS-- dup - mirror- place a few around.

9.) Heart 2 --C&P as NRL -- place in upper middle of fence -- DS -- TR

10.) Bottle 1-- R = 80% X 2 --USM --C&P as NRL-- place on left side of tree --DS -- TR

11.) Bottle 2 -- R = 80% X 2 -- USM -- C&P as NRL -- place next to the other--DS- TR

12.) Bottle 3 -- R = 80% X 2 -- USM-- C&P as NRL-- place on right side of tree--free rotate -- right 10

13.)Head Stone-- R = 60% USM -- C&P as NRL -- place in center of fence at the very bottom -- DS --TR

14.) Grass -- from my supplies -- C&P as NRL -- place on bottom -- dup. & place this below the 1st one,dup. & place this below the 2nd one..Merge Down = MD -- dup. the merged area, and place this one above the other,MD and make sure this layer is right above the bottom layer.

15.) Candles -- R = 60% X 2 --USM-- C&P as NRL--place on top of headstone--DS

16.) Bling 1 -- C&P as NRL -- place layer above the grass layer-- opacity = 70%

17.) Poser 1 -- C&P as NRL -- place on bottom right -- DS

18.) Skull 2 --C&P as NRL --place on right side above rge fence-- DS -- TR

19.) Mist 1 --- C&P as NRL - move to the right side-- move layer above the background--dup. & mirror--MD --then move down to wear it sits on top of grass-- dup. & flip --bring it up a little--MD

20.) Spider web-- R = 60% X 2 --C&P as NRL -- place it on the tree--DS--dup. and place this on top right of fence --TR  

21.) Spider -- R = 50% --USM -- C&P as NRL -- place on bottom of spider web --DS --TR

22.) Bat -- C&P as NRL--place on right side, DS. dup. R = 50 % move to between poser and bat--TR--- dup. mirror and move up some.

23.) Blood 1 -- R = 50% & 80% X2-- USM--C&P as NRL--place on head stone. DS --TR

24.) Flower 1 - 5 ( since these are all the same resize and on seperate layers) R = 50% X 2 & 80% USM --C&P as NRL--place them in front of head stone--DS (each) -- TR-- move below the poser tube--with raster deform tool--straighten it out..

25.) Bottle 4 -- R = 45 % -USM--C&P as NRL -- place on lower left bottom--DS -- TR

26,) Now we are going to make a jagged bottle--after resizing it..R = 45% USM--C&P as NRL -- with lasso tool, the same settings as before -- draw a jagged edge break--EX.1-- once happy, hit cut-- now go around the jar -- EX. 2 --promote selection to layer--rename top --Select none -==SN

DO the same  for bottom--on top free rotate right --90

place where you want just C&P and then add a DS.

I place mine here and there,, TR 

26.) Once your happy--merge visible all layers--and resize to 57%--

Now Add all CR info -- your name and save as PNG..

Thanks for looking

hugs

Angie

Lavender Blue PTU

I Wrote this Tutorial, any resemblance to others is purely a coincidence...Please DO NOT add this to any Group,Forum or Website/Blog..

The kit I am using is called "Lavender Blue" and is by Lady Noelle of Lady Noelle-Buttons and Bows and you can find it Here  

The Art, I am using is by Barbara Jensen and you can find all her tubes Here  

Let's get started.
Filter : Xenofex2--Constillation

My Supplies Here  

Open my supplies and download them where you can see my Examples...

Drop Shadow = DS = 2,2,50,5 black

900 X 900

2 Tubes, same Artist,

1.) Ln Gate -- Copy and Paste = C&P -- as New Raster Layer = Nrl--Center -- DS

2.) Flower 3--R = 75X2 (if needed) sharpen - unsharp mask = USM --Place on bottom of gate--- DS -- duplicate = Dup.-

mirror-- Tag Reference = Tr.

3.) Flower 2 -- R = 75% USM--C&P as Nrl -- Place on right side--move layer below other flowers -- DS

4.) Flower 1-- R = 75%   USM--C&P as Nrl --Place on left side, move layer below other flowers-- DS
5.) Flower 10 -- R = 75% X3 USM--C&P as Nrl --place on bottom of fence over Rose stems--DS -- Dup.--mirror--Merge Down -= MD
6.) Close out bottom layer,and then Merge Visible all layers-- rename gate -- move it up to the right some--Tr
7.) Tube--(resize if needed)   C&P as Nrl -- (NO DS-)- Tr place on left side top--mirror-then Dup. mirror this one too,place this on the bottom right of tag..- move layer above the bottom-- now use the mask I have in my supplies..and use it for both tubes--Opacity - 50%and when finished --MD
8.) Tube -- C&P as Nrl -- Mirror and place on bottom left of the gate DS-- Tr
9.) Hanging Jewels curtain--R = 75% and 90% 
USM--C&P as Nrl--place on top -move layer below flower (Do not DS)
10.) Journaling mat - R= 60%  USM--C&P as Nrl--place on bottom left--DS --Tr--move below tube layer
11.) Bow 6 - R = 50% & 80%X 2 -USM--C&P as Nrl-- place center top of gate--DS--Tr
12.) Bow4-- R = 50% & 80% X2 --USM--C&P as Nrl--  place on bottom between the 2 flowers--Dup. and move this one below the merged later--then on the top Bow- with your freehand selection tool--(these settings)  Point to point--add shift--feather = 1--smoothing = 0-- and anti-alias-- checked---EX.1 & 2--DS-- on the bottom bow--close out bottom layer--tag and tube layers--Merge visible-- now open all layers but bottom...
13.)  Working on top again..Corset 02B--C&P as Nrl-- place on right bottom--Below masked tube layer--opacity = 70% -- DS--Tr
14.) Corset 03B--C&P as Nrl-- Opacity 70%--place this one on top left and move layer below the masked tubed layer..DS --Tr
15.) Perfume bottle 1--R = 75% USM--C&P as Nrl--place on bottom center--DS--Tr.
16.) Perfume bottle 2--R =75% --USM-C&P as Nrl--place on bottom left side of tag---DS --Tr
17.) Heart 1 -R =75% X2--USM-C&P as Nrl-- place on right side bottom-- DS -- Tr..--Dup.. R- 75% sharpen--leave this on the other heart--DS--MD
18.) Heart 2 -R = 50% USM- C&P as Nrl- place on left center-- DS --Tr.
19.) Safety Pin --R = 50%  USM-C&P as Nrl- Place on mat--DS--Tr.
20.) Lady bug 1-- R =50% & 60% -USM- C&P as Nrl--place on top near bow--DS-- Dup.-- R = 60% -- sharpen-- place on bottom right side ---Tr.
21.)Lady bug 2 -- R = 50% & 60% --USM- C&P as Nrl--place on top right side -- DS--Tr. Dup. --R--= 60% --sharpen --place on bottom left side Tr.. (blue and purple heart) purple on the tag..
22.) Now close all layers But 2,3,4, from bottom up...MV--all layers--rename bottom--rename raster1 --background
23.)  Close Background & bottom layer-rename (raster 3) Diamond Curtains
24.) From merged layer to upper--MV-- rename "Top"
so now you should have 4 layers,working from bottom upward...background -- bottom -- diamonds --- top
EX.3
25.) Resize 56%=--504 X 504 --add a paper above the background, then add a square mask of choice.delete mask and then ungroup layers, don't forget to crop opaque.
Add all copy right info, if you don't want to animate,then Merge visible all layers,after adding CR, and name save as PNG
If you want to animate..continue
26.) now close all layers beside the Diamonds--with your freehand selection tool,same settings --- go around each diamond as shown on EX.4-once done--promote selections to layer---now duplicate the diamond layer 3 X = 4 -- diamond layers --rename diamond 1,2,3,&4--close out 2,3,4, layers..now working on layer #1, go to filter--Xenofex 2 --constillations--with these settings : 1.98,29,17,35,61,57,keep original image--random seed-1. 
as shown in EX. 5 &6
27.) Close layer 1 and working on layer #2, same filter just hit the Random seed 1X..when done with all layers-- copy merged,and paste into animation shop,for all layers, now you should have 4 frames-click on the 1st frame,and then Edit all- now go to animation properties and opaque-- then go to frame properties - and change your speed to 20 for all 4 frames..when happy save as GIF.. as shown in the tag at the bottom.
Thank you for looking at my tutorial
hugs
Angie