Burr 2 PTU

I wrote this tutorial,any resemblance to others is purely a coincidence.

Please do NOT add this to any Groups,forum,website etc. without my permission.

Our Scrap kit is by Cari at Black widows Creationz .its name is "Burr" found Here  

The tube I am using is by Cherie Roberts and can be found Here
DS = 2,2,50,5 black
Lets Begin:
900 X 900
1.) EL 34--C&P as NRL--with Magic wand -click on the inside frame
2.) P6  - (or one of your choice) C&P as NRL-- invert and delete --SN --move below frame
3.) Tube -- C&P as NRL -- now duplicate- Blur-gaussian 6- blend mode= multiply -Opacity = 80% --MD -- Dup --now move layer below frame
4.) With Freehand selections tool -- These settings-(-point -  to - point, add shift,feathering =1,smoothing = 0,and anti-alias, checked --)go over frame layers on top--EX..

DS bottom tube--close bottom layer and then MV all layers--rename --Frame

5.) EL 12 - R = 80% --sharpen-- C&P as NRL--place on right side - DS

6.) EL 16 -- C&P as NRL --Place upper left top -- DS-- move layer below frame layer

7.) EL 3 -- C&P as NRL -- Place on right middle -- TR -- move layer below tree -- DS

8.) EL 32 --C&P as NRL -- place on  bottom left -- DS

9.) EL 14 --C&P as NRL--Place on Upper right -- DS --dup. and mirror -- move it over to the other one on right side--crop -- opaque--900 X 900--do this for all 3 layers-- MD

10.) EL 1 -- C&P as NRL -- R=80% - sharpen--place on left side bottom -- DS -- TR

11.) EL 2 -- R = 50% --USM--C&P as NRL-- Place it left center of tag --DS--TR-- dup. R = 80% place near tree--TR-- dup. R = 80% place upper middle side of tree--TR

12.) EL 19--R = 50%--USM --C&P as NRL--PLace on tag--lower left bottom--beside glass--DS--dup.-R=80%--move behind glass-- TR

13.) EL 18-- R = 80%- USM-- C&P as NRL--Move layer behind-- EL 2--DS --TR

14.) EL 7 -- R = 60% USM-C&P as NRL-- place on upper right corner--DS--TR--free rotate- right 25%

15.) EL 6--R= 60% --USM-C&P as NRL--place on upper left side.

16.) EL 5-- R = 60% USM --C&P as NRL--place lower right bottom--DS--TR

17.) EL 9--R = 40%-USM--C&P as NRLPlace on upper center-- DS--TR

18.) with bottom still closed off -MV all layers R--56%-sharpen--504 X 504

Add paper of choice.

19.) add a mask of choice--delete mask--ungroup layers--when done-- open bottom layer and MV all layers..

Now add All Copy Rights and Name --then save as PNG.

Thank you Cari for letting me use your kits..and I really would like to see,any results using my tutorials.

Thanks

Angie

Burr 1 PTU

I wrote this Tutorial, any resemblance to others is purely coincidental. Please fo not add this to any Website, group or forum, without my permission. The awesome kit I am using is called " Burr" and is by Cari at Black Widow Creationz and can be found Here

This Beautiful Christmas tube I am using is by Elias Chatzoudis and can be found Here

Drop Shadow / DS / 2,2,50,5,black

2 Tubes of choice

Let's begin.

900 X 900

1.) EL 13 / C&P as NRL / place in center / With magic wand / click inside all 3 circles / selecton/ modify / expand 5

2.) P 9 ( or one of choice) C&P as NRL / place this over the frame / invert on frame / delete on paper, move this layer below frame / DS both

3.) With Magic Wand / click inside left circle/ modify/expand/5 /with full size tube/Resize 80% /I mirrored mine,/ C&P as NRL place over circle, invert on frame / delete on tube / Select none /on right side/with Magic Wand click inside the circle/ C&P tube/ leave tube size./ move boobs up/ TR/ do the same for left side circle/ invert / delete/ DS all tubes/
4.) With main tbe place on center circle / I made mine to look as if it was sitting on the circle/ dup./Blur/gaussian 6/ blend mode / hard light/ opacity /90 / MD. / now close the bottom layer and MV all layers/ rename / frame
5.) EL 28 / C&P as NRL / place on top left / move below frame / dup/ mirror andflip/ MD / DS
6.) EL 31. / change color to match the colors on tube / C&P as NRL/ place on top left/ TR/ DS /dup. mirror ad flip/MD/ and place below frame layer.
7.) EL 17 / C&P as NRL / place on left bottom /DS/TR
8.) EL 1 / R / 80% / sharpen/ place on left ( mirror) on the bottom/ DS / TR
9.) EL 16/ change color to match tube /C&P as NRL / place it on top right side / DS / dup./ mirror /R / 80% X2 / place on right side bottom /TR/ move this below the scarf layer,
10.) EL 20 / R /80% / sharpen/ C&P as NRL/ place on left side top / DS / TR
11.) EL 22 / R / 50% X2 / unsharp mask/ C&P as NRL/ place it on right side / DS / TR
12.) EL2 / R/ 50% / USM/ DS  place on bottom / left side bottom next to glass.
13.) EL 19 / R/ 60% / USM / C&P as NRL / place on right side of the glass/ move below on center / TR/ DS
14.) EL 18 / C&P as NRL/ place onlower right side // DS/TR
15.) EL 6 / R /60 / USM / C&P as NRL / Place upper right corner/ DS/ TR
16.) EL 5 / R / 60 % / USM / C&P as NRL / mirror. place on lower left bottom/DS/TR
17.) EL 9 / R / 40% & 80 % / USM./ C&P as NRL place on lower right corner / DS / TR/ dup. mirror/ close out bottom layer.
18.) MV all layers / R / 56 % / sharpen / With Paper of choice/ add a mask / delete mask / ungroup layers/ now open bottom and MV/ all layers
19.) Add all Copy Rights / your name / and save as PNG.
Thank you for looking at nny tut. if you do use this, I would really like to see. Thank you
hugs
Angie

 



NikyXmas PTU

I Wrote this Tutorial and any resemblance to others is purely a coincidence. Please do not upload this to any website,forum or group without my permission.

The Art we are using is by Barb Jensen and you can find her art Here 

The Scrap kit I am using is called "NikyXmas" and is by Cari at Black Widow Creationz and you can find it Here 

My Supplies Here  

2 Christmas tubes

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

900 X 900

1.) EL. 29 -- Frame- Copy and Paste =C&P - as New Raster Layer = NRL-- Place in center and move the frame up a little.

2.) With Magic Wand - Click inside - Selections - Modify- expand - X 5

3.) Paper 10 ( or one of choice ) - C&P as NRL - place over frame -- invert and delete- place paper below frame-- DS on both -- Select None = SN

4.) Tube ( of choice ) --Resize = R = if needed - - C&P as NRL - Duplicate = Dup. - Blur - Gaussian - 6 - Blend Mode = BM = Multiply - Opacity - 75% - Merge Down = MD = DS-  with Magic Wand - click on inside of the frame - invert on frame - delete on tube - SN -- OP = 72% - move tube below frame.. now close of bottom layer and Merge Visible = MV - rename layer = Frame

5.) EL. 10 - - C&P as NRL - Place below frame-- move down a little -DS - Tag Reference = TR

6.) EL. 14 - R = 60% - adjust - sharpness  - unsharp  mask - = USM.-- - C&P as NRL - place it on right side of canvas - above EL10-- DS -  EX. 1-- - Dup.- flip - and place it across from the other-- TR- now Dup. again-- And R = 80%  continue duplicating and resizing till you are happy with it- MD all these layers and rename it Doodle.

7.) EL. 11 - R = 60% and 80% -- USM -- - C&P as NRL - - place on doodle-- DS - TR - Dup. move to open part of doodle -- EX.2 -- Continue going to left side of doodle--Close out frame and doodle and MV bow layer and then MD to doodle.

8.) EL. 12 - R = 60% and 80% - USM -- - C&P as NRL --- place on left side at bottom -- DS --TR -Dup.- and Mirror-- TR-- MD

9.) EL. 1 --  - C&P as NRL -place on left side  -- Dup. - and move this one below doodle layer-- now with freehand selection tool - with these settings -- point to point -- add shift-- feather = 1 - smoothing = 0 - anti -alias - checked - go around the top one only- near the bow -- EX.3 -delete and SN. - DS bottom one.

10.) EL. 15- R = 50% and 80% X2--USM- place  lower left side -- DS-- Dup - R = 80% - place on right side -- TR

11.) Tube #2-- C&P as NRL - place it on the right side- I mirrored mine-- now - Dup.- Blur- gaussian - 6

BM = Soft light -- Op.= 100% -- MD -- DS-- TR

12.) EL 21- R= 65 % and 80%- USM-  - C&P as NRL - place bottom left-- DS

13.) EL. 22- - C&P as NRL - place on top right-- DS -- TR-- Dup. - mirror- R = 80%-- place below the 1st one--TR-- Keep repeating if you desire.

14.) EL. 26 - R = 60%--- C&P as NRL - place below the frame layer -- Dup.- R = 80% place on both of the left side next to santa. DS

15.)  EL. 31-- C&P as NRL - place below poinsetta layer -- do not DS

16.) EL.6 - R = 50% -- USM -- - C&P as NRL -place on right side in front of tube-- DS-- TR

17.) EL. 7 - - C&P as NRL -  place on bottom layer -- center-- DS -- TR -- close out bottom layer-- MV all other layers-- R = 56% - sharpen.

18.) Add a paper of choice -- I used ( Paper 9 ) make sure the paper is on bottom-- add mask of choice-- delete mask -- ungroup layers-- then crop -- opaque -- open bottom layer, MV. all layers- 

Add all Copy right info.. name and  save as PNG..

Thank you for doing my tutorial.

Hugs

Angie  

 

Wintery Xmas PTU

I wrote this Tutorial, any resemblance to others is purely coincidental..Please do not upload this to any website,forum or group without my permission.

The Christmas tubes I am using is by Al Rio.. I have no Idea where to find his Art.. and will add it if anyone sends me a note.

The kit is called "Christmas" and is by Beth at Glimmer and Sparkel you can find her kits Here

Drop Shadow / DS / 2,2,50,5  black

Supplies / Examples Here

1 or 2 tubes
Filters / Mura meister // copies

Let's Begin:

900 X 900

1.) Tree 3 .../Resize / R / 75% & 80%.../ sharpen / unsharp mask../ USM //Copy and paste / C&P / as New Raster Layer / NRL/ place on left side / in center

2.) Tube / C&P as NRL / place on right side of Tree. / Duplicate.. / dup. / blur / gaussian / 6 / Blend mode / bm / hard light / opacity / op/80% / Merge Down / MD.. / DS

3.) Add 2nd tube / same as before../but change BM to soft light / and OP / leave at 100 / MD and DS /C&P as NRL / mirror and place it on the left side../ Tag reference / TR

4.) Christmas Flower .. / R ../50 % X 2 & 80% X 3 / USM /C&P as NRL../ go to Mura Meister's / Copies / make sure flower is in center../ use these settings./ Line, wrap around / behind / line / 5, 100, 0, 0, 0, 1/0/0/ 0 / 100 / 0/ 0 / 3/0/ 0..As in EX. 1 ./ add DS.
5.) Candy Cane / R. / 40 % / sharpen / place on left side/ between both flowers / DS / move layer below tree layer../dup. / place this between next 2 flowers /  repeat 2 more X's till you have a total of 4 / TR / mirror the last 2 / on the right.
6.) Candy Cane regular size . / C&P as NRL / place next to tree on the left side/ move layer below tree layer / dup. / R / 80 % mirror / place on right side  of tree../ move down a bit.
7.) Ornament 3 / open no not add yet./
8.) Christmas shoe 4.. / R / 40% & 80% X 2 ../ C&P as NRL / onto ornament /DS and then MD / now C&P as NRL./place on center top./ with lasso tool, these settings / point to point ./ add shift / feather / 1 / smoothing / 0 / anti alias checked/ Ex. 2 / when done MD on top of flower / DS / TR / EX. 3
9.) Ornament 1 ./ repeat number 8.) resize 90% / USM. / use boot instead.. / DS on boot.  / MD./ when happy R./60% X 2../  C&P as NRL / USM / place layer below tree on the left side./ DS. / TR.
10.) Mistel Toe / R. / 40% X 2 / Sharpen. / C&P as NRL /  place on right side / DS. / TR. /
11.) Cupcake 1 / R. / 40% & 80 % X 2 / USM. / C&P as NRL / place in front of box.. / DS. / TR.
12.) Hot Cocoa / R. / 40 % X3 / USM. / C&P as NRL / place on left front./ DS. / TR.
13.) Present 1. / R. / 40 % X 3 / USM. /C&P as NRL / place on right front. /DS. / TR.
14.) Present 2 / R. / 40 % X 2 / USM. / place this one next to other present on right side front/ DS. / TR.
15.)Pepperment / R. / 60 % X 2 & 80 % / USM. /C&P as NRL  / Place it on the right side./ move this layer below the tube layer. / DS /Dup../ R / 80% and place this one on left side / continuw duplicating and resizing them don't forget to sharpen, now, / close off the bottom layer (background layer) Merge Visible// MV / all layers..
16.) Paper 3.. / or one of your choice.. / add mask of choice. / delete mask,and then ungroup layers.. when happy open bottom layer and the MV./ all layers
17.) R / 56 % /504 X504 / Add all Copy Right info and Name
Save as Png.
Hugs
Angie