Darkangel PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence. Please do not add this to any Blog, Forum, Group, etc. without my permission.

The Tube I am Using is by : Jennifer Janesko and you can find them Here

The kit I am using is called " Darkangel" and is by Cari at Black Widow Creationz and can be found Here

Let's Begin

900 X 900

Drop Shadow = DS = 2,2,50, black 5

1.) EL.30 - Resize = R-80%- Sharpen = Unsharp Mask = USM

Copy and Paste = C & P -- New Raster Layer = NRL

now go to Rotate clockwise--90% - with magic wand- click inside all spaces

2.) Selection - modify - expand 3-- paper 10 ( or one of choice) invert on frame and delete on paper-select none = SN - . move paper below frame. DS both.

3.) With magic wand click inside of top square (Sq) -sel - mod-ex3 -add a piece of the tube - invert - delete - SN - move layer below frame - DS-

4.) Repeat #3 for all other Sq.'s -- don't forget to Crop Opaque the bottom 2 sq.'s - when done - close bottom layer and Merge Visible = MV - all layers.. then free rotate left - 45% - rename = frame - move up a little and over to the left- Tag Reference = TR

5.) EL. 10 - C&P as NRL- Place on upper right -- DS & TR

6.) EL. 13 - - C&P as NRL- place on bottom right -- DS & TR

7.) EL. 20 - R = 75% X2 --USM--Mirror-- C&P as NRL- place on left bottom - duplicate = dup.- blur - Gaussian 6-- blend mode = dodge - opacity = 100 - merge down - MD

8.) EL. 2--- C&P as NRL- place middle left center - DS -TR- dup. & mirror - move down

9.) Tube - C&P as NRL- place on bottom Left side- dup.- blur- Gaussian x6 - Blend mode- soft light - opacity = 80 % - MD- DS - move  layer below Cat layer

10.) El.23 --C&P as NRL- place on right side - DS - move layer below other tree -TR

11.)-EL. 39 --C&P as NRL- place on top right -DS -dup.-mirror- move next to other - make both about 1 sq. from set of canvas - TR --MD -- mover  layer on top of bottom layer

12.) EL. 27 -C&P as NRL-R = 75% X2- USM- move layer right above the chain layer ( second from Bottom)  DS - move up a little - TR

13.) EL. 9- R= 75% -USM -C&P as NRL-place on top left - DS & TR

14.) EL. 16 --C&P as NRL- place upper center-move layer above city skyline--DS & TR  

15.) EL. 36 -R - 55% & 75% -USM - mirror ---C&P as NRL- place on right side of tube- DS&TR

16.) EL. 19-R = 50% & 75% --USM --C&P as NRL-place on right side bottom - DS & TR-mirror -dup. - R = 80% - sharpen -place next to 1st one- dup. & mirror- I repeated this a few more times. TR

17.) EL. 42 --R =60% & 80%  X2-- USM --C&P as NRL-place near Roses on right bottom.- DS

18.) EL. 5--R = 60% USM---C&P as NRL- place on bottom right - move layer below roses -- DS & TR- dup. - R -80% place next to other--TR

19.) EL. 3 -R=60% -USM ---C&P as NRL- place on 4th frame - DS & TR

20.) EL. 11 -- R=50% USM-C&P as NRL-place on bottom right of tube -DS & TR -- dup. - R = 80% -sharpen --move to center left -TR - dup. 1 more X -mirror

21.) MV. all layers - R=56% =504X504 - sharpen --add paper of choice - I used P1. -- add mask of choice -delete mask and ungroup layers - crop opaque

22.) EL. 41 - R =60% X3 - USM ---C&P as NRL-place on right-dup.-mirror -- dup. - move to almost center - and move down -- TR.

23.) Open bottom layer- and MV all layers--

Add all Copy RIghts and Name - save as png.

Thank you all for following my tut.

Angie

      

     

 

  

 

 



Sweet as Honey PTU

I wrote this Tutorial and any resemblance to others is purely a coincidence. This cute scrap kit is called " Sweet as Honey" it is by Betty at Whitemyst Designs Here

The cute tubes are by Elizabeth Austin and you can buy them Here

You will need 4-5 tubes,

900 X 900

Drop Shadow - = DS = 2,2,50,5 black

Let's Begin

1.) Film Frame- Copy and Paste = C & P -- New Raster Layer = NRL . Place it in the center of canvas. With Magic wand click inside each squares.--Selection - modify - Expand X 6

2.) Paper 7 ( or 1 of your choice) - C&P as NRL-invert on frame and delete on paper. Select None= SN.-- DS both

3.) With magic wand click inside frame 1-selection-modify-Ex.6 - C&P tube as NRL, place over the frame that is active, invert on frame--delete on tube--SN-- DS tube and move below frame and above paper

4.) Repeat #3 for the next couple of frames, add tubes...-- DS on tubes. Close bottom layer and Merge Visible all layers-- keep bottom closed, rename merged layer-- as--" Frame "-- move it up a little.

5.) Flower - C&P as NRL -place below frame layer --DS- duplicate = dup. -- mirror and merge Down = MD.

6.) Circle frame -C&P as NRL-place on bottom layer - with magic wand click inside center of frame -- sel.-mod.-expand X6 -- add paper of choice - I used P8- invert on frame and delete on paper -- SN - DS - both - tag reference = TR.

7.) Apple With Worm - Resize = R -- 75% sharpen= unsharp mask = USM --C&P as NRL- place on bottom left - DS- TR

8.) Balloons - R = 40% - USM-C&P as NRL- place on center bottom- DS - place layer below Apple layer. -- TR

9.) Cupcake -R= 80% X2 -- USM --C&P as NRL-place on right side of canvas, at the bottom -- DS -- TR

 

10.) Tube - R- if needed--  C&P as NRL -place  next to cupcake -- DS -- TR

11.) Tube - R- if needed - C&P as NRL-- place on left side center-- DS -- TR

12.) Dozen Roses R = 75% X3-- USM-C&P as NRL-place on middle bottom of canvas. -- DS--TR

13.) Star Lights- R = 80% -- sharpen --C&P as NRL - place on top center -- DS -- TR

14.)Tree with hearts-C&P as NRL --place on right side top-- move layer below frame layer -- DS -- TR

15.) Light Effects -- C&P as NRL --leave it where it is..--DS--TR

16.) Ric Rac Ribbon -C&P as NRL-- place it on top of bottom frame-move layer right above the 2nd frame -- DS -- TR

17.) Milk Shake - R = 70% X2-- USM -C&P as NRL -place on left bottom -- DS -- TR

18.) Heart doodle-mirror -C&P as NRL- place on top left side-- move layer below tree layer- DS - dup. - R =80%- sharpen-- move it a little lower than 1st heart. TR

19.) Cherries -- R= 60% X 2 --USM -C&P as NRL Place on top left side and on the doodle-DS -TR

20.) Candle R = 50% & 80% -- USM-C&P as NRL- Place on bottom right -- DS --TR- dup. -R - 80% -- place it next to other one-- TR

21.) Butterfly - R - 50% X3 --USM-C&P as NRL-place on top right side -DS - TR - Free rotate left 30% --dup. R- 80% == place it in center --TR

22.) Butterfly2 - R = 50% - USM -C&P as NRL-- place on left side-DS -TR - dup. R = 80% sharpen -mirror - place it in the middle --TR

23.) With the bottom closed -- merge visible all layers. R+56% sharpen -= 504X504

24.) Paper 5 or 1 of your choice-- C&P as NRL- place above the bottom-- add a mask--delete mask and ungroup layers--crop opaque- 504 X 504.. open bottom layer and merge visible all layers..

25.) Add all copy right information -- your name and save as PNG.

Thank you for doing my tut, and if you get this kit, please let Betty know what you did with it, she really likes feedback

Thanks

Angie

 



Love me not PTU

I wrote this tutorial any resemblance to others is purely coincidental.

This Beautiful Scrapkit is by Cari at Black Widows Creationz and can be found Here  

The Art is by Jamie Kidd and you can find it Here  

Mask by Trese tags & Tuts and you can find it Here  

I used # 275

MuRa Meisters  copies

Drop Shadow = DS. = 3,2,50,5 black

1 close-up / 1 

Lets begin

900 X 900

1.) EL. 2 -- copy and paste = C&P -- as New Raster Layer = NRL. -- place in center of canvas,With magic wand click on the inside of your frame-- selections - modify - expand - 15

2.) Paper 2 -- C&P as NRL -- place over frame -- invert on frame and delete on paper-- Select none -- move paper below frame- DS both frame and paper

3.) Tube -- C&P as NRL -- duplicate = Dup. = blur =gaussian- 6-- blend mode = hard light --opacity =90% Merge down--duplicate again and move this one below the frame- on the top remove any over hanging the frame --  and remove any that is over the bottom part of the frame --
DS -bottom tube, tag reference = TR--- then close bottom layer and Merge Visible all other layers--once happy--duplicate the frame again ; mirror -- resize = R = 90% to 95%
TR-- place the frames like mine.now merge these together-
4.) Close up tube--C&P as NRL -mirror and place on left side of canvas --dup.- blur-gaussian-6-Blend mode= screen -- opacity -80% -- Merge down --DS.. TR
5.) EL 12-C&P as NRL- resize to fit-- I used my raster deform tool,and just moved it over some -- TR --DS --frame
do not merge them,just leave it be.
6.) Now open a new canvas -- 900 X 900 - EL. 13 -C&P as NRL-R = 75% - unsharp mask-= USM- dup. close original-- now go to Mura meister -copies- with these settings -- wallpaper - (shrink) - random- wraparound- blend mode-- 20-50-50-0-0-/0/-/100/-0-0-/0/-0-30-0- ok ,
EX.1

C&P as NRL-place it on top--move layer above the bottom layer --R= 75%- sharpen- move to upper right side-- DS --TR
7.) EL 7.--C&P as NRL -place on bottom right -- DS-TR
8.) EL. 5-- R= 75% - sharpen-C&P as NRL- place on middle center -- DS --TR
9.) EL 32--C&P as NRL--place it on left side of hearts --DS--TR
10.) EL1--C&P as NRL---place in center -move layer below the heart layers--DS --TR
11.) EL 26 -- R - 60% --USM---C&P as NRL--place on left bottom -DS - TR
12.) EL 3 -- R=50% & 80% X 2--usm. -- C&P as NRL -- place on top left -- DS - TR
13.) EL 9 -R = 50% X2--USM --C&P as NRL-- place on bottom between the boots- DS--
14.) EL 6 - R = 50% X2 -- USM --C&P as NRL-- place on the right side of El. 9 --DS--TR
15.) EL 8 -- R = 50% X2 USM --C&P as NRL--place on the left side of middle chocolate -- DS --TR
16.) EL 27. -C&P as NRL-- place it between the 2 hearts -- mirror-- move layer below candy layer-- DS --TR
17.) EL 25 -R = 50% -- USM --C&P as NRL--place on upper right close to the top -- DS -TR
18.) EL. 24 --R= 50% & 80% USM --C&P as NRL--place on top right layer,next to the corset -- DS - TR
19.) EL. 11  R = 50% & 80% ---C&P as NRL--place on bottom,next to the left boot --DS--TR
20.) EL. 29 --C&P as NRL--place this on top left frame-- DS --TR
21.) Sparkle---C&P as NRL-- Place where you like, I placed mine close to the top--- No DS-- this is optional 
22.) With bottom still closed - Merge visible -- then R = 56% sharpen-- (optional { Xero - Porcelain -- default})
23.) Now add a paper of choice -- I used --P 5.. place it above the bottom now add a mask-- you can us any one you wish I used Trese's mask 275--the link is at the top...after adding the mask --you'll delete the mask and make it ungroup layers, once thats done, crop opaque --504 X 594 -- no open bottom layer and merge visible-
24.) Add ALL Copy Right info, and your name..
Thanks for checking out my tut.
hugs
Angie