HappyBday PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence.

Please do NOT add this to any Forums, Groups, or Website.

The cute little Tube I'm using is FTU and by AIKA here is where you can find her art Here

The Kit is called " My Bday Party " By Black Widow Creationz Here

My Supplies Here
Drop Shadow = DS = 2,2,50,5,black

900 X 900

Let's Begin

1.)  EL. 32 - Copy and Paste = C&P - As New Raster Layer = NRL - place in center of canvas - DS

2.) Tube -C&P as NRL -  Resize = R - if needed - place tube on star so it looks like, duplicate = dup. - blur - Gaussian - 6 - blend mode = soft light - opacity = 100 - merge down = md, -  DS
3.) EL. 3 - R= 80% X 2 - sharpen more - -C&P as NRL - place on right corner of star - DS - tag reference = TR
4.) EL. 12 - C&P as NRL - R= 80% X3-USM- place on left side in front of Tube -- DS and Tag Reference =TR
5.) EL. 13 - R= 75% X 3 USM  - C&P as NRL - Place in center- move layer below frame layer - DS & TR
6.) EL. 15 -- C&P as NRL - Place on left side - move layer below tube - DS & TR
7.) EL.10 - C&P as NRL - Place on top - DS - move layer below frame- dup. - move this to top of frame, with eraser go around saying- wherever the other elements are - TR- & DS bottom layer
8.) EL. 21 -R =65% & 80% USM - C&P as NRL - place on corner of star - free rotate - right - 25% - DS & TR
9.) EL. 26 - R=80% X3 -USM- C&P as NRL -  place on bottom center - DS
10.) EL. 35 - - C&P  as new Image - dup. it as many different colors you wish - close all but the 2nd  one - while it's open - selection  float -  de-float - go to = adjust - color balance - manual color correction -click on the source tag which you need to change to your color on 1st one. = F21E47-- on the duplicate - find a color of your choice, I'm using Purple - 6E2EDb6  H/184... S/152 (with all colors its better if you check your Hue and Saturation and then colorize ) as you can see from my examples found in my supplies.  I did these colors
    A.) Light Blue - 27B2C7 - H/ 132 -  S/171
B.) Dark Blue = 0000FF- H/169 - S/255
     C.) Light Green = A2CD45 - H/55 - S/ 147
                    D.) Yellow = FFFF40 - H/42 - S/255    
E.) Red = 000000  - H/ 255 - S/255
When your doing your colors, if you get done, select none, and  resize all layers - 65% X 2 USM - - C&P as NRL -- Add all over the place - DS & TR
11.) EL. 37 -R=50% USM  - C&P as NRL - place below frame layer - and below all others beneath the frame -DS & TR
12.) EL.11 - R = 50% USM - - C&P as NRL -place on frame , left side -  move layer below tube layer-- DS & TR
13.) EL. 27) R = 75% USM - C&P as NRL -Place on bottom right - DS & TR
14.)   EL. 20  - C&P as NRL -place on top right -- DS - dup. mirror -flip  TR- close off bottom- Merge Visible all layers - R =56% = 504 X504
15.) Paper 1 - ( or one of your choice)  - C&P as NRL - Add a mask of choice  - delete mask - yes - ungroup layers, then crop it- Merge Visible all layers - - Then add all Copy rights and name- save as PNG
Thanks for sticking with me..
Hugs
Angie

         


Lucky Charm PTU

 I wrote this Tutorial, any resemblance to others is purely coincidental. This Awesome St. Patty's kit is called : "Lucky Charm" By Black Widow  Creationz  and can be found Here

The Artist is by Tom Hoover and can be found Here

Filters = MuRa's Meister - copies

Drop Shadow = DS= 2,2,50,5 black

Lets Begin

900 X 900

1.) EL. 28 Resize = R = 50% & 80% X 3 - Unsharp Mask = USM-- Copy and Paste = C&P as New Raster Layer = NRL - place in center and rename "Frame"

2.) MM -copies - Encircle 10, 54, 54, 0, 100, -25, 100, 0, 100, 0, 0, 30 ,0 ,  

 EX.1

DS

3.) with Magic Wand click on inside of frame - Selection -modify , expand X 5 -

4.) Paper 9 - C&P as NRL- place over frame -  Invert on Frame and delete on paper - select none - move paper layer below frame - DS

5)EL. 3 - C&P as NRL- Place it on top  - Center - DS

6 .) Tube- Place on left side of circle - duplicate = dup. - blur- Gaussian 6 - Blend Mode = soft light - merge down = MD = DS

7.)  EL.16 -- C&P as NRL-Place under frame and on top of paper- mirror and R = 80% - DS

8.) EL. 17 - R = 70% sharpen - C&P as NRL- place  on right side bottom - DS

9.) EL. 18 - C&P as NRL- Place on top right -  move layer below paper -  dup. and mirror- DS both & Tag Reference = TR

10.) EL. 26 - C&P as NRL- place on bottom layer right side- move layer below tube layer - DS & TR

11.) EL. 40 - C&P as NRL- Place on left side- move layer below tube- DS

12.) EL. 27 - R =  50% USM - C&P as NRL-place on bottom left side - Free rotate- left 25 - DS & TR

13.) EL. 33 -R = 50% X 2 & 80% USM - C&P as NRL- place on paper -DS -  dup. R - 80% place around paper layer-(do as many as you wish. MD layers)

14. EL. 32 -R = 50% X 2 & 80% USM - C&P as NRL- place on paper -DS -  dup. R - 80% place around paper layer-(do as many as you wish. MD layers) TR

15.) EL.19 - R = 80% X2 USM  - C&P as NRL-Place center of paper - DS -opacity 50%

16.) EL. 14 -R = 50% USM- C&P as NRL-place beneath the 4 leaf clover - Opacity - 80%

17.) EL. 56 - - C&P as NRL- place on top center- DS- move layer to bottom -Dup. - mirror- flip -  move up and over to the right -TR

18.) EL. 8 - C&P as NRL- move to upper left - DS - free rotate left 25 - move to bottom layer- Dup. - mirror

19.) Merge Visible all layers- R = 56 = 504 X 504 - sharpen

add Paper of choice to bottom of tag. I used "P7" -- add mask of choice - delete mask and ungroup layers -Crop Opaque- Merge Visible..

20.) Add all Copy right info and Name- save as PNG

I hope you enjoyed this tut.

hugs

Angie

Seduction PTU

I Wrote this Tutorial, any Resemblance to others is purely a coincidence.

Please do NOT add this to any Website, Group or Forum without my permission.

The Tube I am using is by Barbara Jensen and can be found Here

The kit I am using is called "Seduction" by Kandii Popz and can be found Here

Drop Shadow = DS = 2,2,50,5 black

900 X 900

Let' begin

1.) City - Copy and Paste = C&P as New Raster Layer =- NRL - Place in center - DS

2.) Tube - C&P as NRL - Place on left side of city. Duplicate = Dup. and then Blur- Gaussian 6 - Blend Mode = Soft Light - Merge Down = MD  - DS

3.) Wire Fence -  C&P as NRL  - place on right side - move layer above bottom layer - DS

4.) Stars 2 - C&P as NRL  -place on top right corner - DS - move layer above fence layer - Dup. - mirror - flip & MD

5.) Heartbeat - C&P as NRL - place right below tube-mirror - on bottom - DS - Dup. & mirror and place together- Tag Reference = TR - MD -  place right above tube..

6.) Boots - C&P as NRL -  place on bottom right, DS

7.) Glasses - C&P as NRL - place on right side bottom, in front of boots. - DS

8.) Hearts - C&P as NRL - move to left side - move the layer right above bottom layer.. DS & TR

9.) Bracelet - Resize = R - 60% - Unsharp mask = USM - C&P as NRL - place on center bottom - DS -

10.) Lippy - R = 60%- USM - C&P as NRL  - place next to bracelet - DS

11.) Cuppy - R = 80 % - sharpen - C&P as NRL - Place on left side bottom - DS &TR

12.) Dog - C&P as NRL - Place on left side front - DS & TR

13.) Nail Polish - R= 80X2 - USM - C&P as NRL - place next to lip stick - DS & TR

14.) Flower 1 - R= 80% X2 - USM - working on the fence line - C&P as NRL  - place on top right corner. DS & TR - Dup. R= 80% - Move over. you can do this for a lot of flowers, just by duplicating and then layer them around, resize some-when happy. MD 15.) Ribbon 1 - C&P as NRL - Place over wire area - DS

16.) Ribbon 2 - C&P as NRL - place below other ribbon - DS & TR - MD

17.) Skull 1 - C&P as NRL  -Place on top center - DS & TR - move layer right below tube layer.

18.) Skull 2 - R = 75% & 80% - USM - C&P as NRL  - place on center left - DS & TR

19.) Stars -  C&P as NRL  - Place layer below tube layer- DO NOT DS - TR

20.) Butterfly - R = 60% USM - C&P as NRL  - place on upper left side- Free Rotate - left - 25 - DS - Dup. -. Mirror

21.) Lips - R = 80% USM- C&P as NRL - Place wherever you want - DS

22.) Close Bottom layer- Merge Visible all layers -

23.) Sparkles - C&P as NRL  - place it above merged layer - NO DS- I placed mine on upper left top - R- 56% = 504 X 504

24.) Paper 4 ( Or one of choice ) C&P as NRL  - place it above bottom layer- add mask of choice- delete mask and ungroup  layers - open bottom layer and then Merge visible all layers.

25.) ADD ALL Copy right info and your name - save as PNG.

Thanks for taking a look

hugs

Angie

 

MY Sweet Girl 2 PTU Forum style & Avatar



I Wrote this Tutorial any resemblance to others is purely coincidental. Please do NOT add this to any Website, Forum or Group without my Permission.

The Kit I am using is called " My Sweet Girl" by Black Widow Creationz and can be found Here

The Tube I am using is by Barbara Jensen and can be found Here

My Examples Here

Filters = MuRa's Meister - Copies

Drop Shadow = DS = 2,2,50,5 black

650 X 250

1.) Tube - Copy and Paste = C&P as New Raster Layer = NRL -  Duplicate = Dup.-- rename dup1 & dup2- close #1, on #2- dup -  on dup. - adjust-blur-Gaussian 6 - Blend Mode = hard light - opacity - 80% merge down = MD - DS - dup. - mirror and space evenly apart - Tag reference = TR - MD - crop opaque -close

2.) Open #1 tube layer- bring tube up to show the teddy bear- MM Copies - Wave ( vertical ) V wave wraparound - behind - 15 - 20 - 100 - 0- -10  - 0 - 100 - 0 -0  -0 - 30- 0 - EX.1 -- dup. 2X - move to right side and 1 to the left side - TR -close bottom and then MV. the 3 layers -- opacity 70%

open #2- move this to top layer-

3.) Working on top layer-- EL.11 - Resize = R =70% X2 and 80% Unsharp mask = USM -~C&P as NRL ~ Place on right side - Free rotate left 30% - DS and Tag reference = TR

4.) EL. 16 - R = 70% X2 USM -~C&P as NRL ~Place between tubes - DS - TR - Dup.- R = 70% - place on left top - TR

5.)  EL. 15-R= 60% & 80% X 3 USM ~C&P as NRL ~ Place on bottom Left--DS

6.) EL. 13 - R = 60% & 80% -  USM --~C&P as NRL ~ Mirror - place lower right side- DS & TR

7.) Get a color from your tube I used (D13557 246/160/131 ) With magic wand - click on the inside of Lipstick=Selection- modify - expand X5- add NRL and then Flood fill with color. Select None = SN. - With Freehand Selection tool - go around the top of Lipstick - (EX 2-1, 2-2, 2-3 ) go to Inner bevel -2,8,0,20,0,0 (color from tube) 315, 50,30 - ok - SN - Merge Visible = MV - -~C&P as NRL ~R= 60% & 80% X 3 - USM - place next to purse - DS

8.) EL.24 - -~C&P as NRL ~ place layer above merged layer - DS

9.) EL. 37 - R = 80% - sharpen - -~C&P as NRL ~ place on top center- DS & TR

10.) EL. 36 - R = 50% & 80% X2 - USM -~C&P as NRL ~ place on bottom left - DS & TR

11.) EL. 38 - R = 50% X2 & 80 USM-~C&P as NRL ~

place on flower stem

12.) close the lady bug - and then MV all layers - open ladybug.

13.a.) If you don't want to animate, just MV all layers including the Ladybug..

Add all Copy right info, including your name and then save it as a PNG

13.b.) to animate - On a NRL - add all Copy Right info as well as name... let's Animate

Open Animation shop ~~ copy merged and then paste into animation shop as New animation

PSP:

Dup. Ladybug ~rename Ladybug 1 and Ladybug 2~~Ladybug 2 ~~ Move it up a little, ( or as high as you wish) Close Ladybug 1 -  copy merged - and paste after current frame, continue doing this till you have them all . when happy click on the 1st frame : selection - frame properties;

then save it as Gif.

Avatar

Cut out a section of tag  150 X 150 - you can either use your Crop tool or freehand selection tool.

**** Remember if you use a tube -- ADD your Credit to the Artist ****

Also if you use a Scrap Kit it is nice to credit who made that kit.

Unless the kit maker asks you to credit them

Have fun,

hugs

Angie

 

My Sweet Girl 1 PTU

I Wrote this Tutorial, any resemblance to others is Purely a coincidence.

Please do not add this to any Website, Forum or Group without my permission.

This cute Girl Kit is called "My Sweet Girl " By Black Widow Creationz and can be found Here

The tube I am using is by Jamie Kidd and can be found Here

Examples ; Here

Filters = MuRa's Miester = Copies

Just scroll down till you come to the The file.

Drop Shadow = DS = 2,2,50,5 black

Let's begin:

900 X 900

1.) EL.16 - ( Grab a color from tube, we will use that to color the flower....) Copy and Paste = C&P - as New Raster Layer = NRL - place in center of tag ...with magic wand click on inside of flower .....add NRL .......go to selection - modify - expand..= 6 --flood fill flower - Select none = SN ...- move layer below flower - do the same for leaves and stem - and center of flower- -the colors I used are -- dark green = 008000 -- light brown =  88450b --  center of flower = c00000 ...--when done close bottom layer and merge visible = MV --  now`~~ open Resize = R ~ =80% -  sharpen ~~ duplicate = dup. ~~ close this one -  on original - using Mura Meisters Copies~~ - Encircle ~~ Circle ~~ tile mode ~~ behind~ 8 ~50~50~0~100~ -25 ~100~0~100~0~0~30~0~ ok. EX.1 ~  Repeat with other flower - now merge down - tag reference = TR - EX.2

2.) With Magic Wand .~ click in center of flowers - selections~ Modify ~ expand 5 - Paper ~ I used Paper 5 ~ invert on frame ~ Delete on paper-- Select None = SN. ~~ move paper below frame - DS ~~ both.

3.) Tube - C&P as NRL~ place on left side of the frame - Dup. ~ Blur ~ Gaussian 6 ~ Blend Mode ~ Soft Light - Merge Down = MD -- DS

4.) EL. 1 ~ C&P as NRL~  place in front of tube~ move it over some ~ cut off one side using freehand selection tool ~ point to point ~ add shift ~ feather = 0 ~ smoothing = 0~ anti - alias ~ checked - I always crop opaque - 900 X 900 - to make sure you have a clean cut - EX. 11 and EX. 12 - dup. - flip and merge together.

5.) EL. 11 - R = 70% X2 = Unsharp Mask = USM - ~ C&P as NRL~ place on top right- free rotate - Left 30 - DS

6.) EL. 15 - R = 70% X2 -=USM -~ C&P as NRL~ Place on bottom left - DS&TR

7.) EL. 13 - R = 80 % - sharpen ~ C&P as NRL~ mirror - place on lower right side - DS&TR

8.) EL. 14- R = 80% X 4- USM. ~ C&P as NRL~ place on bottom left side --DS&TR

9.) EL.  24 - ~ C&P as NRL~ flip - place on bottom front- move layer to above the bottom layer - DS - TR -  dup. & flip.

10.) EL. 37 - ~ C&P as NRL~ Place top center--DS&TR

11.) EL. 40 - ~ C&P as NRL~ Place on upper left - DS

12.) EL. 8 - R = 60% - USM ~ C&P as NRL~ Place on right center - DS&TR

13.) EL. 36 - R = 60% & 89% -~ C&P as NRL~ place on bottom left - DS&TR

14.) EL. 32- R = 50% & 80% - USM - ~ C&P as NRL~ Place on right side bottom- DS&TR

15.) EL. 3 - R = 50% USM ~ C&P as NRL~ Place on bottom center - DS&TR

16.) EL. 28 - R =  50% USM ~ C&P as NRL~ Place center left side - DS&TR

17.) EL. 33 - ~ C&P as NRL~ Place on right side - above bottom layer - mirror - DS&TR

18.) EL. 34 - ~ C&P as NRL~ Place left side  - DS & TR - place right above layer 17.

19.) EL. 38 - R = 50% & 80% X2 USM ~ C&P as NRL~ place in center of flower - free rotate - left 25% - DS & TR - Dup. - free rotate to right 25%

20.) Close bottom layer and MV. all other layers - R = 56% = 504 X 504 - add a paper of choice , I chose P5- place above bottom layer add a mask of choice- crop opaque- when happy open up bottom layer and MV all layers again.

21.) ADD ALL CR info - name and then save as PNG.

I hope you had fun. Thanks

hugs

Angie

Fantasy Land PTU

I Wrote this Tutorial, any resemblance to others is purely a coincidence. Please do NOT add this to any website, Forum or Group.

This cute Fantasy kit is called "Fantasy Land" by Black Widow Creationz and can be found Here

The Tube I chose is by Kenny Kiernan and can be found Here

My Supplies Here

Scroll down till you find " Fantasy Land "

Drop Shadow = DS= 2,2 50 ,black

2 Tubes

Let's begin

900 X 900

1.) EL. 39  - Copy and Paste = C&P as New Raster Layer =  NRL- place it in center of canvas - DS

2.) P 4  ( or one of your choice ) with Magic wand - click on the inside of frame - selections - modify - expand X12- invert on frame and delete on paper- move paper below frame ,and DS - Select none = SN

3.) EL. 14  - C&P as NRL - move layer below the paper layer, and move it up to the upper right corner - DS - Tag Reference - TR

4.) EL. 12 -   C&P as NRL - Place on left side - DS & TR

5.) EL. 22  -  C&P as NRL -  place  on left bottom - DS & TR.

6.) Tube 1-  Resize = R - (if needed)   C&P as NRL - Place in center of frame- place layer below frame - Duplicate = Dup.- Adjust- blur- motion - Angle =131 - Strength = 38 - Blend Mode = BM = Soft Light - Merge Down = MD - DS & TR

7.) Tube 2 - (R if needed) - C&P as NRL - place on the right side of frame - Dup. - adjust- blur- Gaussian 6 - BM = Soft Light - MD

8.) EL. 21 - R = 56% Unsharp mask = USM -  C&P as NRL - place below frame and in front of Tube 2 - DS & TR

9.) EL. 20 - R = 75% USM -  C&P as NRL - Placed on upper right corner - move layer right above cloud - DS & TR

10.) EL. 23 - R = 75% X 2 - USM - mirror - C&P as NRL - place on right side - & move below tube 2- DS & TR

11.) EL. 24 - R = 56% - USM -  C&P as NRL - place on left side - move layer right above bottom - free rotate - left 30 - DS & TR

12.) EL. 38 - R = 56 % - USM -  C&P as NRL -  place on bottom next to castle - DS & TR - Dup. - R = 80 % - place this one next to the other - MD

13.) EL. 37 - Flip -  C&P as NRL - place on bottom left - move layer below castle - DS & TR

14.) EL. 40 - R = 80% - USM -  C&P as NRL - Place in front of castle - DS & TR

15.) EL. 42 - R = 60% - USM - C&P as NRL - place in front of flowers - center - DS & TR

16.) EL. 31 - R = 60% X2 - USM -  C&P as NRL - place on right bottom, in front of magic wand - Dup - R = 80% - mirror- and place it next to other- MD - DS & TR

17.) EL. 13 -  C&P as NRL -  place on star - with freehand selection tool - point to point - add shift - feather = 0 - range = 10 - smoothing = 0 - anti - alias - checked. - go around   the section as in EX. 1 & 2 in my supplies - delete - SN - DS & TR

18.) EL. 34 - R = 60% - USM -   C&P as NRL - place on left side top - DS - Dup. - R = 80% - mirror - place on bottom right side - TR

19.)  Close out bottom layer - now R= All layers 56% - sharpen = 504 X 504

20.) P 5 - ( or one of your choice ) - C&P as NRL - make sure its above the bottom layer - add a mask of choice - delete mask - ungroup layers -  crop opaque - open bottom layer, and then Merge Visible -

21.)  Add all Copy right info, your name - and save it as a PNG.

Thank you for checking my work.

Hugs

Angie