Tuesday, November 25, 2014
Thursday, November 20, 2014
Halloween Kitty PTU
I wrote this Tutorial, any resemblance to others is purely a coincidence. Please DO NOT add this to any Website, Forum or Group Without My permission.
The Halloween Kit is called "Halloween Kitty" By WhiteMyst Designs and can be found Here
The tubes I am using is by Brigid Ashwood found Here
Filter = EC5 impact -- glass
My Supplies = Here
Filters - EC5 Impact
Drop Shadow = DS = 2,2,50,5 black
Tubes - 2 tubes of choice
Let's get started
1.) Iron Fence -Copy and Paste = C&P --- as new raster layer = NRL - place in center of tag. - DS - you might have to duplicate = Dup. and mirror, do this until your fence goes directly across your canvas.
2.) Creepy Tree--Some of these tubes are by "Belles Graphics " Please do not share them unless you have Becky's permission.-(to do so, would be not following her tou's )
3.) Bat and Moon- C&P as NRL- place on upper left corner-- EC4 Gradient Glow--10 Yellow - DS - Tag Reference = TR
4.) Tombstone 2 = Resize = R. = 50% - Sharpen = Unsharp Mask= USM - C&P as NRL- place in center - DS & TR
5.) Tombstone - R = 50% X2 - USM - C&P as NRL- place on right side - move layer below fence layer - DS & TR
6.) Physco house - R= 54% & 80% X2 - USM - C&P as NRL- mirror and place on right side top. Move layer right above bottom layer - close off bottom layer.
7.) Grass - C&P as NRL- place on bottom - Dup. mirror and Merge Down = MD. move layer right below house--Dup. and Flip - bring down - MD - TR - continue making enough grass as you need..
8.) Click on bottom layer- add a NRL - flood fill -with 000000 (black) rename sky
9.) Tube 1 = C&P as NRL- place on right side .-- Dup. Blur- Gaussian 6 -- Blend Mode = Hard Light - Opacity = 90% - MD & DS
10.) Witch Table - R = 50% - USM - C&P as NRL-place on grass - move layer below witch TR - Don't DS for now.
11.) With Ellipse tool - draw a circle - nice size one - Example in Supplies - when don Convert to raster layer-- with magic wand click on inside of circle
12.) Selection - modify - expand 6 - C&P as NRL- paper 1 ( or of your choice) invert on circle - delete on paper- Select none-
13.) If you want to animate- continue to do these steps. If not skip line #14
14.) 2nd Tube - C&P as NRL- place under circle - and erase any sticking out of circle, try to center the picture where you can see almost all of the tube - DS & TR
15.) Still working on the Crystal Ball - (merge the 2 Down) with Ellipse tool - Material (create on vector) line style - straight- width - 5 - anti - alias- checked. draw a decent circle around image - then go to- effects -EC5 Impact - glass - settings - Clear with reflection -now delete your elipse layer. Dup. Crystal Ball and then close- on duplicate you want to R = 15% USM - make it fit on the crystal ball- once done --Merge Down - MD
16.) Black cat - R = 50% USM.. - C&P as NRL - place on bottom left - DS - Dup. R = 80% - mirror - place on center fence - move layer below tree layer-- TR
17.) Candy Bucket - R = 50% & 80%X2--USM -- C&P as NRL - Place it on center bottom.
18.) Cat on Pumpkin - R = 50% X2 - USM - - C&P as NRL -Place it on right side bottom center--DS--TR- Dup. move this one left top side center - move layer below fence layer.
19.) Cauldron R= 50% USM - - C&P as NRL -move to left side - TR & DS
20.) Ghost - R = 50% USM - - C&P as NRL -place on right side- DS & TR - Dup. R = 50% - mirror - and move lower - TR
21.) Halloween lights - R = 50% USM - C&P as NRL - place on fence - from left to right - Dup.-move it over to other side ,ande next to other one. - Dup. one more time = 4 layers - merge these down to each other once happy crop to fit - opaque = 900X900--DS & TR
22.) Jack -C&P as NRL - place on left side - DS & TR
23.) Mummy - R = 50% & 80% X 2-C&P as NRL -DS - place on center bottom - move beklow crysatl ball layer - TR - mirror - Dup. R= 80% place this one on top center - TR
24.) Spider Web - R =50% USM-C&P as NRL -(DS) place on right side of house - TR = Dup. -R= 50% sharpen--place on bottom of tree - TR - Dup. and mirror - place it on fence.
25.) Witch - R = 50% USM - C&P as NRL -- place on bottom left side--DS & TR
26.) Vamptini - R = 50% X 2 - USM -C&P as NRL - place this one in front of center - DS & TR - Dup. - R = 80% place on crystal ball table in front --TR
27.) Scary Butterfly - R = 50% USM-C&P as NRL -place on top right - DS & TR -- free rotate - left 25 -- Dup. R =80% - mirror - place on bottom left.
28.) Sparkle - place on bottom - move layer right above sky - =Opacity 80%--MD
29.) Go ahead and Merge Vivible all layers below the CB layer -- Now R = 56% = 504 X 504 - Sharpen - now add all thr copy right info and then name-- if you do not wish to animate-delete the CB layer and Merge Visible and then save as PNG.
TO Animate keep going.
30.) let's get started....-on the layers below the CB layer rename them "Bottom" Now working on the top layer - with your Preset shape tool, and with colors to accent your tube, draw an arrow-the examples for all these should be in my files..
31.) DS and rename them R=Arrows - convert to raster layer
32.) Now open CB and close - orginal-- open arrows on bottom
GO To Animation shop- copy as new rastrer layer and paste into AS.
Repeat this by opening the close area as well --TR
do this for a 3 frame tag-- when happy-change frame properties to 45-- view and when happy saves as 80%
thank you for looking at my finished tuts.
Hugs
Angie
Sunday, November 16, 2014
October
I am sorry I didn't get any tutorials done this month. Real life did a bang up job on this family.. My BF's Mom died, we had her funeral, which she was buried on the anniversary of our Dad's passing, even though it's been 4yr's. And then we had to pack up her 3 bedroom duplex apartment, and we only had from the 14th to the 31st to have all her stuff packed and gone. Even in Death there is no respect.
And in all this we had to leave town due to, an emergency for 4 days. Oh yeah, we also had to plan a Wedding of my BF to my brother, his 1st marriage.. took him 50 yr's , about time.. huh?
Ok so my next 2 tutorials are Halloween based, sorry- better late than never...
Can't wait till things get back to order.
hugs
Angie
Ok so my next 2 tutorials are Halloween based, sorry- better late than never...
Can't wait till things get back to order.
hugs
Angie
Tuesday, September 30, 2014
Trick or Treat FTU
I wrote this Tutorial any resemblance to others is purely coincidence.. Please DO not add this to any Forum, Website or Group without my Permission.
This cute Kit is FTU, is By WhiteMyst Designs and can be found Here
This cute little Tube is by Anniebel at Here
My Stuff Here
Drop Shadow = DS= 2,2,50,5 black
Filters : MuRa's Meister
You'll need 2 tubes - 1 face & 1 Full
Lets begin
900 X 900
1.) Candy Corn 3 - Resize = R - 56%X2-- Unsharp mask = USM- Copy and Paste = C&P - as New Raster Layer = NRL
Place in center-- use Mura meister - Encircle- Tile mode - behind - 12,50,50,0,100,-25,100,/0/100,0,0,/30/,0, ok--EX1
2.) With Magic Wand -Click in center of circle- Selection- Modify- Expand =5 - Paper 8- C&P as NRL - place in center- invert on frame layer and delete on paper-- Crop opaque- now move below frame - DS on both - Tag Reference = TR
3.) Large tube - C&P as NRL - place on top of paper and below frame - Duplicate = Dup. - Blur - Gaussian 6 - Blend Mode = BM -Multiply- opacity = 90% - when done Merge Down = MD - BS & TR
4.) Dup. Frame -With Raster Deform tool - on 2nd Candy frame - move it like EX 2- or if you can get your free rotate buttons work (mine was holding picked signs) Just remember you have to intersect the C-Layers --EX2
5.) Cat & Pumpkin -C&P as NRL -R=75% USM -place on bottom right side - DS & TR
6.) Cauldron - R 75% - USM -C&P as NRL - Place on bottom left- DS - & TR
7.) Cupcake - R = 75% X3 - USM -C&P as NRL - place it on bottom next to kitty - DS & TR
7.) Cupcake - R = 75% X3 - USM -C&P as NRL - place it on bottom next to kitty - DS & TR
8.) 2nd Tube- -C&P as NRL - Place on bottom left -DS - move below cauldron layer-- TR - Dup.= R =75% - sharpen - now dup. this one - then blur -the same as before on #3 - MD-place this one on top right- DS- TR
9.) Ghost - R = 80 % - sharpen=-C&P as NRL - mirror- place on top left side -- DS & TR
10.) Jack - mirror--C&P as NRL - place on upper right side - DS - TR
11.) Pumpkin bucket with candy -R = 60% X 2 --USM-C&P as NRL - place on bottom left - next to cauldron -- mirror--DS &TR
12.) Roses with Ribbon - -C&P as NRL - place on center left side-- DS & TR - move layer below 2 tube layer --
13.) Skull cherry - R = 60% X 2- USM---C&P as NRL - place on bottom right side -- DS - Dup. - 80 % place this below the 1st one.---Dup.- R = 80% - sharpen -mirror - place this one below the 2nd one- once they are done and you like your tag - then Merge Down = MD -- TR
14.) Vamptini- R =50% USM--C&P as NRL - place on center bottom - DS & TR
15.) Spooky Tree - R = 50% USM -C&P as NRL - place on top right side--DS &TR - move layer below the candy cane layer.
16.) Tombstone-R=50% USM --C&P as NRL - place on top left -- DS -Dup. - mirror place this one - move layer below the tree layer -- TR
17.) Paper of choice - I did 3 papers - #1,#3,#7. -C&P as NRL - Add a nice mask to all 3 layers--delete mask and ungroup layers - do this for all mask layers - crop opaque if needed, to clean around the edges
18.) BOO WA- R = 50% USM -C&P as NRL - place on bottom of frame -- DS & TR
19.) Black Cat - R - 50% USM -C&P as NRL - place on bottom left side - DS & TR
20.) Bat - R= 50% USM -C&P as NRL - Place on center right side - DS & TR
21.) Close All Candy
cane layers and above- on the rest below CC layers == Merge Visible = MV. - and rename Bottom - close this out
22.) Now open all layers above the candy corn - and MV- rename top- open candy cane 1 and top and bottom layers--
23.) R - 56% all layers = Sharpen on all layers
24.) ADD ALL Copy Right info== If you don't want to animate just open all layers- delete the 2nd candy cane - or you can leave it.. It will look like one of the other tags..Now add Name and save a PNG..
25.) To animate just go ahead and copy Merged - and place this one in animation shop as new animation
26.) Close CC 1 - and open CC2 - copy merged and paste after current frame
27.) In Animation shop== edit - animation properties - opaque
28.) Now go to Frame properties and change it if you think its to fast, just bring it up a little -- I left mine at 10
After viewing it and you like it, save as GIF.
I hope you injoyed this little tut.
Hugs
Angie
Here are 2 more tags ,using the same tut, but by making the as PNG's
1.)
2.)
Nerds Love PTU
I Wrote this Tutorial, any resemblance to others is purely coincidence. This awesome back to school kit is called
" Nerds Love " by Black Widow Creationz and can be found at her store Here
The Tubes I am using are by Keith Garvey and you can find his Tubes Here
Let's Begin
900 X 900
Drop Shadow = DS -= 2/2/50/5 black
Tubes - 2 of the same artist ( Full size and Head )
Tubes - 2 of the same artist ( Full size and Head )
1.) EL. 33 -Copy and Paste = C&P as New Raster Layer = NrL -With freehand selection tool -- point to point - add shift - feather = 0 - smooth = 0 - anti - alias checked.
Go around the center of phone - Selections - Modify - Expand X6
2.) 1st tube - C&P as NRL - Resize = R - if needed - invert - delete - duplicate -blur- Gaussian = 6 --blend mode - hard light - opacity = 50% - Merge down - add a DS--Tag reference = TR
3.) Get colors from tube- and a nice font . I used Swanson st. 1, color = F9265A close out tube so you don't get distracted - write something on the phone -- I added mine like a text -- " ( Hey ___, Want to meet me after school to study
(self)_sure- K, Just call me at # ) add a DS - close out the # -and the phone - Merge visable = MV = on all layers - when happy - R= 70% -Phone and # - both layers - adjust - sharpen -= unsharp mask = USM - move to the right a bit -TR
4.) EL. 8 - C&P as NRL - place on left side - top - move layer below phone layer - DS
5.) 2nd tube - C&P as NRL - place on the left side--Duplicate tube - adjust -blur - Gaussian X6,- Blend Mode = soft light -opacity - 100%--merge down
6.) E17 -- C&P as NRL - place on bottom below 2nd tube - DS- duplicate it - move this layer below the other shoe layer - TR
7.) EL 19 -- C&P as NRL - place on the upper right side -- move layer to above bottom - DS &TR
8.) EL 39 - R = 60% - USM - C&P as NRL - Place on top of Cell- phone-- DS & TR
9.) EL.36 - - C&P as NRL -Place on the bottom right side -- DS & TR
10.) Open EL 7 - shift D - close original book. - working on book -EL. 35 - - C&P as NRL - R =60% X 2 & 80% - USM--place over the composition book - DS both - than MV . when done.- -
11.) C&P as NRL -R = 50 % place it on top right corner - free rotate - right 30% -- TR
12.) EL. 37 - R = 50% & 80% X 3-- USM - C&P as NRL -place on locker - when done - DS-- free rotate left 30% - with Rastor Deform tool - "or Pick tool " holding the top right node- EX.1- and move it like EX.2-- DS & TR
13.) EL. 38 - R = 50% & 75 X2-- USM -- C&P as NRL - place on another locker (your choice) Free rotate - rotate right 30% with raster deform tool / pick tool - I only moved it sideways to fit on the locker.- DS & TR
14.) EL.16 -R = 50% USM-- C&P as NRL - place on bottom side of phone - DS & TR - duplicate - mirror - TR
15.) EL.12- R = 50 % USM - - C&P as NRL - place on bottom right side - DS & TR
16.) EL.2 - R = 50% USM -- C&P as NRL - place on bottom right - DS and place ;layer below the WA layer -- TR
17.) EL 26 - R 50% *& 80% X2 USM -- C&P as NRL -place this on middle bottom, and on (WA--Study) DS & TR
18.) EL. 3 - R = 50 % X2- USM - C&P as NRL -place on bottom right corner - DS & TR
19.) EL.4 - R = 50% & 80% USM - C&P as NRL -place on right side , bottom - DS & TR
20.) EL. 5 - R = 50% & 80 % USM- C&P as NRL -place on bottom right near the ruler - DS & TR
21.) EL.40 - 50 % USM - - C&P as NRL -place on bottom left DS & TR
22.) EL. 15 - R = 50% USM- C&P as NRL - place on lower left side -- DS & TR- place it over the WA.
23.) EL. 27 -R 50% USM- C&P as NRL -place on bottom left side, move it below the shoe layer- DS & TR
24.) EL. 28 - R = 50% X2- USM - C&P as NRL -mirror - place on bottom right side - DS & TR
25.) EL. 34 - R = 50% USM- C&P as NRL -place on right side - DS & TR - place below WA.
26.) EL. 9-- C&P as NRL - place on bottom center - bring layer to right below the laptop layer.. DS & TR
27.) Now if you are not going to animate- MV all layers- R= 56% - sharpen--
28.) Paper 4 and 8- I used 2 different mask - Vix 15 &19- delete mask on both and ungroup layers for both. - remember to crop opaque - 504 X 504
29) Add - all Copy rights and Name- save as PNG
30.) Let's animate- first off lets R = 56% sharpen and then Add All Copy right info, and name
Now we are going to MV layers -
A.) Close out - MD both WA and Lockers -rename lockers-
B.) Skate layer and Phone layer- Merge Down - Close Locker- phone and phone #
C.) You should now have 3 layers - EX 3
We are going to add the phone # in PSP and take it over to Animation shop - you can do this in Animation shop if you prefer, or do it the old fashion way .lol
D.) open text # - move it as close to the right side, you should have 940 (area code ) copy #,close this one and with freehand selection tool - point to point - add shift - feather-0 - smoothing - 0- anti alias checked
E.) open duplicate - move the # a little - dup. close out the dup layer. use the freehand selection tool to erase the part not needed - close this one
F.) Repeat Layer E - until you have the # going across the phone - I had 14 frames in AS-- when your happy with your "tag" you can either open all layers and save it as "AS" and then bring it over to AS - and follow the instructions. I did mine the old fashion way, by opening each layer and Copy Merged and paste in AS -
G.) when done Edit All frames - Animation properties - and opaque- and then go to Frame Properties - and change it to 30
View your animation, and when you get the way you wish.. save as GIF
Glad you checked out my Tutorial
Hugs
Angie
Here is the Non -animated one
Go around the center of phone - Selections - Modify - Expand X6
2.) 1st tube - C&P as NRL - Resize = R - if needed - invert - delete - duplicate -blur- Gaussian = 6 --blend mode - hard light - opacity = 50% - Merge down - add a DS--Tag reference = TR
3.) Get colors from tube- and a nice font . I used Swanson st. 1, color = F9265A close out tube so you don't get distracted - write something on the phone -- I added mine like a text -- " ( Hey ___, Want to meet me after school to study
(self)_sure- K, Just call me at # ) add a DS - close out the # -and the phone - Merge visable = MV = on all layers - when happy - R= 70% -Phone and # - both layers - adjust - sharpen -= unsharp mask = USM - move to the right a bit -TR
4.) EL. 8 - C&P as NRL - place on left side - top - move layer below phone layer - DS
5.) 2nd tube - C&P as NRL - place on the left side--Duplicate tube - adjust -blur - Gaussian X6,- Blend Mode = soft light -opacity - 100%--merge down
6.) E17 -- C&P as NRL - place on bottom below 2nd tube - DS- duplicate it - move this layer below the other shoe layer - TR
7.) EL 19 -- C&P as NRL - place on the upper right side -- move layer to above bottom - DS &TR
8.) EL 39 - R = 60% - USM - C&P as NRL - Place on top of Cell- phone-- DS & TR
9.) EL.36 - - C&P as NRL -Place on the bottom right side -- DS & TR
10.) Open EL 7 - shift D - close original book. - working on book -EL. 35 - - C&P as NRL - R =60% X 2 & 80% - USM--place over the composition book - DS both - than MV . when done.- -
11.) C&P as NRL -R = 50 % place it on top right corner - free rotate - right 30% -- TR
12.) EL. 37 - R = 50% & 80% X 3-- USM - C&P as NRL -place on locker - when done - DS-- free rotate left 30% - with Rastor Deform tool - "or Pick tool " holding the top right node- EX.1- and move it like EX.2-- DS & TR
13.) EL. 38 - R = 50% & 75 X2-- USM -- C&P as NRL - place on another locker (your choice) Free rotate - rotate right 30% with raster deform tool / pick tool - I only moved it sideways to fit on the locker.- DS & TR
14.) EL.16 -R = 50% USM-- C&P as NRL - place on bottom side of phone - DS & TR - duplicate - mirror - TR
15.) EL.12- R = 50 % USM - - C&P as NRL - place on bottom right side - DS & TR
16.) EL.2 - R = 50% USM -- C&P as NRL - place on bottom right - DS and place ;layer below the WA layer -- TR
17.) EL 26 - R 50% *& 80% X2 USM -- C&P as NRL -place this on middle bottom, and on (WA--Study) DS & TR
18.) EL. 3 - R = 50 % X2- USM - C&P as NRL -place on bottom right corner - DS & TR
19.) EL.4 - R = 50% & 80% USM - C&P as NRL -place on right side , bottom - DS & TR
20.) EL. 5 - R = 50% & 80 % USM- C&P as NRL -place on bottom right near the ruler - DS & TR
21.) EL.40 - 50 % USM - - C&P as NRL -place on bottom left DS & TR
22.) EL. 15 - R = 50% USM- C&P as NRL - place on lower left side -- DS & TR- place it over the WA.
23.) EL. 27 -R 50% USM- C&P as NRL -place on bottom left side, move it below the shoe layer- DS & TR
24.) EL. 28 - R = 50% X2- USM - C&P as NRL -mirror - place on bottom right side - DS & TR
25.) EL. 34 - R = 50% USM- C&P as NRL -place on right side - DS & TR - place below WA.
26.) EL. 9-- C&P as NRL - place on bottom center - bring layer to right below the laptop layer.. DS & TR
27.) Now if you are not going to animate- MV all layers- R= 56% - sharpen--
28.) Paper 4 and 8- I used 2 different mask - Vix 15 &19- delete mask on both and ungroup layers for both. - remember to crop opaque - 504 X 504
29) Add - all Copy rights and Name- save as PNG
30.) Let's animate- first off lets R = 56% sharpen and then Add All Copy right info, and name
Now we are going to MV layers -
A.) Close out - MD both WA and Lockers -rename lockers-
B.) Skate layer and Phone layer- Merge Down - Close Locker- phone and phone #
C.) You should now have 3 layers - EX 3
We are going to add the phone # in PSP and take it over to Animation shop - you can do this in Animation shop if you prefer, or do it the old fashion way .lol
D.) open text # - move it as close to the right side, you should have 940 (area code ) copy #,close this one and with freehand selection tool - point to point - add shift - feather-0 - smoothing - 0- anti alias checked
E.) open duplicate - move the # a little - dup. close out the dup layer. use the freehand selection tool to erase the part not needed - close this one
F.) Repeat Layer E - until you have the # going across the phone - I had 14 frames in AS-- when your happy with your "tag" you can either open all layers and save it as "AS" and then bring it over to AS - and follow the instructions. I did mine the old fashion way, by opening each layer and Copy Merged and paste in AS -
G.) when done Edit All frames - Animation properties - and opaque- and then go to Frame Properties - and change it to 30
View your animation, and when you get the way you wish.. save as GIF
Glad you checked out my Tutorial
Hugs
Angie
Here is the Non -animated one
Wednesday, September 17, 2014
May 2014 PTU
I wrote this Tutorial, any Resemblance to others is purely a coincidence. Please do NOT add this to any Website, Forum, or Group , without my permission.
This Beautiful kit is called " May" By WhiteMyst Designs and you can find it Here
The Beautiful tube is by Jennifer Janesko and you can find it at "CDO" Here
My Supplies Here
You will find, all the Example's and the animation
Drop Shadow = DS = 2,2,50,5 black
Lets Begin
900 X 900
1.) 28 - Copy and Paste = C&P as New Raster Layer - Nrl
and place in center of canvas. With Magic wand click inside the circle - Selection - modify - expand X 5 -
2.) Paper 9 - C&P as Nrl - invert on frame - delete on paper - Select None = Sn -- move paper below frame - DS on both. Rename both - frame and shading
3.) 5 -- C&P as Nrl - place under frame-Resize = R = 50% & 80% - Sharpen - Unsharp Mask = Usm - rename = Village
4.) 12 - R = 80% - Usm - - C&P as Nrl - DS - place it only right side of frame - rename - Sun - Tag Reference = TR-
5.) Add Nrl - (only if you are animating) if not go to 6. on your layer - go to your paint brush and find the fuzz soft - brush - EX. 1 - go around tag - size = 150 -step =5 - density = 100 - Rotation = 8 - Opacity = 100 - Blend Mode = BM = Luminance Legacy -100 - opacity = 50% (X) hide fort now.
6.) 13 - R= 50% - Usm - - C&P as Nrl - place on left side - TR- DS
7.) 17 - R = 90% - Usm - - C&P as Nrl - place on left side--DS - TR - Duplicate = Dup. - move this layer below the cupcake layer --move layer up a little - TR
8.) 2 - R = 80% - Usm - - C&P as Nrl -place on bottom right-DS -
9.) Tube - - C&P as Nrl -Dup. - Adjust-Blur-Gaussian = 5 - BM = burn - Opacity = 100 - Merge Down = MD - DS - Place on left side of frame -TR
10.) 15 - R = 50% - Usm - - C&P as Nrl - place it on right side of cupcake - DS & TR
11.) 33 - C&P as Nrl - place above the night layer - rename - Stars -- DS -TR -- (X) hide this layer too.
12.) 39 - mirror - C&P as Nrl - place on upper center -- DS -- move layer below tube layer - TR
13.) 41 - R= 50% & 80% X3-Usm - - C&P as Nrl - place next to tea glass -- DS & TR
14.) 52 - R = 70% - Usm - - C&P as Nrl -mirror - place on bottom right -- DS & TR
15.) 49 - R = 40% - Usm - - C&P as Nrl - place on bottom right - move layer below the bottom martini -- DS & TR
16.) 4 - R = 40% -Usm - - C&P as Nrl -place on bottom right side --next top glass -- DS & TR
17.) 51 - R = 40% -Usm - - C&P as Nrl -place it next to glass -- DS- check "the shadow on new layer box" in your drop shadow menu-EX. 2 free rotate - left 50% ---EX.3
18.) 50 - R = 40% -Usm - - C&P as Nrl -mirror - place on the present - DS & TR
19.) 47 - R = 70% X2 -Usm - - C&P as Nrl - place it on the side of the bird house - DS & TR
20) 30 - R = 40% - Usm - - C&P as Nrl - place on upper right side -- DS & TR -- Dup. R= 80% place this one wherever you wish.
21.) Close all layers but - shoe2 ,cupcake ,shoe1 ,margarita ,sweet tea ,milk ,other drink , present, shadow, male and female birds, when other layers are closed. Merge Visible = MV- all layers -- rename - front bottom -
22.) close front - open tube, frame, fence, limb, MV.- rename frame - close
23.) open butterfly 1, butterfly 2, copy of butterfly 2, MV -rename - Top
24.) Make sure your layers can all be used, now resize all layers 56% = 504 X 504-- Usm all layers- if you don't want to animate-delete the night and stars layers-- open all other layers, and MV. then add all Copy right info and name save as PNG.
If you want to animate after resizing then you want to add all copy rights then: lets animate.
Open Animation Shop
1.) To color the lights, in material palate you want to use this color for the lights (yel = ffff80 ) with magic wand - going in layers - click on the area you want to color - Add NRL and color when done - give it a name, I named mine VIA etc.. EX 5 - I did each building different, make sure you add a Nrl for each building's color --I ended with nine- close them out
2.) start Duplicating the sun and move it down, layer by layer, continue to dup. the sun and moving them down.
when done, work on moving the night layer up, so as the sun goes down the night comes up with the lighted buildings.
3.) when happy and if you caught up by now. I want you to close out each section-- Copy merged layers and working by layers- place 1st layer in animation shop as New animations. all other layers will be paste after the current layer-- when you are done, 10 frames -- edit = select all - copy and clicking on #10- add these after the current frame then reverse frames- you should have anywhere from 19 - 20
4.) now click on #7 - open "animation notes " make active layers 7-19 - propagate paste - and paste into selected frame- reverse the animation
5.) Now clicking on frame 1 - select all - animation - animation properties - opaque- white and then click on #1 - change frame properties
1- = 35
2-10 -= 50
11- = 75
12- = 80
13 & 14 - = 50
15 - 18 - = 35
19 - = 65-
You can always change your speed to how ever fast or slow you want
When done View and then save as GIF
Thank you for checking out my tut.
Hugs
Angie
Non animated tag.
1.) 28 - Copy and Paste = C&P as New Raster Layer - Nrl
and place in center of canvas. With Magic wand click inside the circle - Selection - modify - expand X 5 -
2.) Paper 9 - C&P as Nrl - invert on frame - delete on paper - Select None = Sn -- move paper below frame - DS on both. Rename both - frame and shading
3.) 5 -- C&P as Nrl - place under frame-Resize = R = 50% & 80% - Sharpen - Unsharp Mask = Usm - rename = Village
4.) 12 - R = 80% - Usm - - C&P as Nrl - DS - place it only right side of frame - rename - Sun - Tag Reference = TR-
5.) Add Nrl - (only if you are animating) if not go to 6. on your layer - go to your paint brush and find the fuzz soft - brush - EX. 1 - go around tag - size = 150 -step =5 - density = 100 - Rotation = 8 - Opacity = 100 - Blend Mode = BM = Luminance Legacy -100 - opacity = 50% (X) hide fort now.
6.) 13 - R= 50% - Usm - - C&P as Nrl - place on left side - TR- DS
7.) 17 - R = 90% - Usm - - C&P as Nrl - place on left side--DS - TR - Duplicate = Dup. - move this layer below the cupcake layer --move layer up a little - TR
8.) 2 - R = 80% - Usm - - C&P as Nrl -place on bottom right-DS -
9.) Tube - - C&P as Nrl -Dup. - Adjust-Blur-Gaussian = 5 - BM = burn - Opacity = 100 - Merge Down = MD - DS - Place on left side of frame -TR
10.) 15 - R = 50% - Usm - - C&P as Nrl - place it on right side of cupcake - DS & TR
11.) 33 - C&P as Nrl - place above the night layer - rename - Stars -- DS -TR -- (X) hide this layer too.
12.) 39 - mirror - C&P as Nrl - place on upper center -- DS -- move layer below tube layer - TR
13.) 41 - R= 50% & 80% X3-Usm - - C&P as Nrl - place next to tea glass -- DS & TR
14.) 52 - R = 70% - Usm - - C&P as Nrl -mirror - place on bottom right -- DS & TR
15.) 49 - R = 40% - Usm - - C&P as Nrl - place on bottom right - move layer below the bottom martini -- DS & TR
16.) 4 - R = 40% -Usm - - C&P as Nrl -place on bottom right side --next top glass -- DS & TR
17.) 51 - R = 40% -Usm - - C&P as Nrl -place it next to glass -- DS- check "the shadow on new layer box" in your drop shadow menu-EX. 2 free rotate - left 50% ---EX.3
18.) 50 - R = 40% -Usm - - C&P as Nrl -mirror - place on the present - DS & TR
19.) 47 - R = 70% X2 -Usm - - C&P as Nrl - place it on the side of the bird house - DS & TR
20) 30 - R = 40% - Usm - - C&P as Nrl - place on upper right side -- DS & TR -- Dup. R= 80% place this one wherever you wish.
21.) Close all layers but - shoe2 ,cupcake ,shoe1 ,margarita ,sweet tea ,milk ,other drink , present, shadow, male and female birds, when other layers are closed. Merge Visible = MV- all layers -- rename - front bottom -
22.) close front - open tube, frame, fence, limb, MV.- rename frame - close
23.) open butterfly 1, butterfly 2, copy of butterfly 2, MV -rename - Top
24.) Make sure your layers can all be used, now resize all layers 56% = 504 X 504-- Usm all layers- if you don't want to animate-delete the night and stars layers-- open all other layers, and MV. then add all Copy right info and name save as PNG.
If you want to animate after resizing then you want to add all copy rights then: lets animate.
Open Animation Shop
1.) To color the lights, in material palate you want to use this color for the lights (yel = ffff80 ) with magic wand - going in layers - click on the area you want to color - Add NRL and color when done - give it a name, I named mine VIA etc.. EX 5 - I did each building different, make sure you add a Nrl for each building's color --I ended with nine- close them out
2.) start Duplicating the sun and move it down, layer by layer, continue to dup. the sun and moving them down.
when done, work on moving the night layer up, so as the sun goes down the night comes up with the lighted buildings.
3.) when happy and if you caught up by now. I want you to close out each section-- Copy merged layers and working by layers- place 1st layer in animation shop as New animations. all other layers will be paste after the current layer-- when you are done, 10 frames -- edit = select all - copy and clicking on #10- add these after the current frame then reverse frames- you should have anywhere from 19 - 20
4.) now click on #7 - open "animation notes " make active layers 7-19 - propagate paste - and paste into selected frame- reverse the animation
5.) Now clicking on frame 1 - select all - animation - animation properties - opaque- white and then click on #1 - change frame properties
1- = 35
2-10 -= 50
11- = 75
12- = 80
13 & 14 - = 50
15 - 18 - = 35
19 - = 65-
You can always change your speed to how ever fast or slow you want
When done View and then save as GIF
Thank you for checking out my tut.
Hugs
Angie
Non animated tag.
Saturday, August 16, 2014
March PTU
I Wrote this Tutorial, any resemblance to others is Purely a coincidence.
Please do NOT add this to any Forum, Group or Website, without my permission.
The Art I am using is by PinUpToons and can be found Here
This Beautiful Kit is by Betty at WhiteMyst Designs and can be found Here
Drop Shadow = DS = 2,2,50,5 black
Lets Begin
900 X 900
1.) Tube = copy and paste = C&P as new raster layer = NRL -- duplicate = Dup - Adjust - blur - Gaussian 6 - Blend Mode = BM = Multiply - Opacity = OP --90% - Merge Down = MD -- DS
2.) I 48 - C&P as NRL - place beneath the tube layer- DS - tag reference = TR
3.) I 49 -C&P as NRL - place beneath the city background - DS & TR - Dup. - mirror
4.) I 45 - C&P as NRL - place beneath the tube layer--DS - TR
5.) I 50 - Resize = R - 50% - C&P as NRL -sharpen - Unsharp mask = USM - place on top right - DS & TR
6.) I 11 - R = 50% - C&P as NRL -USM - place on lower right corner -- DS & TR
7.) I 10 - R = 50% - C&P as NRL -USM - place next to cupcake - DS & TR
8.) I 13 - R = 50% - C&P as NRL -USM - place top left side - mirror - DS & TR
9.) I 14 - C&P as NRL - put on left bottom - DS & TR
10.) I 2 - R = 50% - C&P as NRL -USM - place center bottom - DS & TR - Dup. - R = 80% - sharpen - move next to other.
11.) I 30 - C&P as NRL -place on left side - move layer right above the star layer - DS - Dup. - Mirror & MD
12.) I 6 - R = 50% - C&P as NRL -USM - place on left bottom -
13.) I 17 - C&P as NRL - place it on top center.
14.) after done I added the dates - DS & TR
15.)I 18 - C&P as NRL - place layer beneath fruit layers -- DS & TR
16.) I 24 - R = 50% & 80%-C&P as NRL -USM - place on center left -- free rotate - 25 - DS & TR - Dup. - mirror - move to lower right side.
17.) I 1 - R = 50% X 3--C&P as NRL -USM - place on bottom layer --DS & TR - Dup. R = 80% sharpen --mirror and place on top right.
18.) I 3 - R = 50% -C&P as NRL -USM - place on lower right side - DS & TR
19.) I 38 - R = 50% -C&P as NRL -USM - place on lower bottom center - move layer below cupcake - DS & TR
20.) Close bottom layer - and Merge Visible all other layers - R = 56% = 504 X 504
21.) P - 6 ( or one of your choice ) C&P as NRL - Add to bottom layer -- add mask of choice - delete mask -ungroup layers and then crop- opaque
22.) Add all Copy Right info and then your Name - save as PNG.
Thank you for viewing my Tutorial,
hugs
Angie
Other view without banner
6.) I 11 - R = 50% - C&P as NRL -USM - place on lower right corner -- DS & TR
7.) I 10 - R = 50% - C&P as NRL -USM - place next to cupcake - DS & TR
8.) I 13 - R = 50% - C&P as NRL -USM - place top left side - mirror - DS & TR
9.) I 14 - C&P as NRL - put on left bottom - DS & TR
10.) I 2 - R = 50% - C&P as NRL -USM - place center bottom - DS & TR - Dup. - R = 80% - sharpen - move next to other.
11.) I 30 - C&P as NRL -place on left side - move layer right above the star layer - DS - Dup. - Mirror & MD
12.) I 6 - R = 50% - C&P as NRL -USM - place on left bottom -
13.) I 17 - C&P as NRL - place it on top center.
14.) after done I added the dates - DS & TR
15.)I 18 - C&P as NRL - place layer beneath fruit layers -- DS & TR
16.) I 24 - R = 50% & 80%-C&P as NRL -USM - place on center left -- free rotate - 25 - DS & TR - Dup. - mirror - move to lower right side.
17.) I 1 - R = 50% X 3--C&P as NRL -USM - place on bottom layer --DS & TR - Dup. R = 80% sharpen --mirror and place on top right.
18.) I 3 - R = 50% -C&P as NRL -USM - place on lower right side - DS & TR
19.) I 38 - R = 50% -C&P as NRL -USM - place on lower bottom center - move layer below cupcake - DS & TR
20.) Close bottom layer - and Merge Visible all other layers - R = 56% = 504 X 504
21.) P - 6 ( or one of your choice ) C&P as NRL - Add to bottom layer -- add mask of choice - delete mask -ungroup layers and then crop- opaque
22.) Add all Copy Right info and then your Name - save as PNG.
Thank you for viewing my Tutorial,
hugs
Angie
Other view without banner
Subscribe to:
Posts (Atom)