Burr 2 PTU

I wrote this tutorial,any resemblance to others is purely a coincidence.

Please do NOT add this to any Groups,forum,website etc. without my permission.

Our Scrap kit is by Cari at Black widows Creationz .its name is "Burr" found Here  

The tube I am using is by Cherie Roberts and can be found Here
DS = 2,2,50,5 black
Lets Begin:
900 X 900
1.) EL 34--C&P as NRL--with Magic wand -click on the inside frame
2.) P6  - (or one of your choice) C&P as NRL-- invert and delete --SN --move below frame
3.) Tube -- C&P as NRL -- now duplicate- Blur-gaussian 6- blend mode= multiply -Opacity = 80% --MD -- Dup --now move layer below frame
4.) With Freehand selections tool -- These settings-(-point -  to - point, add shift,feathering =1,smoothing = 0,and anti-alias, checked --)go over frame layers on top--EX..

DS bottom tube--close bottom layer and then MV all layers--rename --Frame

5.) EL 12 - R = 80% --sharpen-- C&P as NRL--place on right side - DS

6.) EL 16 -- C&P as NRL --Place upper left top -- DS-- move layer below frame layer

7.) EL 3 -- C&P as NRL -- Place on right middle -- TR -- move layer below tree -- DS

8.) EL 32 --C&P as NRL -- place on  bottom left -- DS

9.) EL 14 --C&P as NRL--Place on Upper right -- DS --dup. and mirror -- move it over to the other one on right side--crop -- opaque--900 X 900--do this for all 3 layers-- MD

10.) EL 1 -- C&P as NRL -- R=80% - sharpen--place on left side bottom -- DS -- TR

11.) EL 2 -- R = 50% --USM--C&P as NRL-- Place it left center of tag --DS--TR-- dup. R = 80% place near tree--TR-- dup. R = 80% place upper middle side of tree--TR

12.) EL 19--R = 50%--USM --C&P as NRL--PLace on tag--lower left bottom--beside glass--DS--dup.-R=80%--move behind glass-- TR

13.) EL 18-- R = 80%- USM-- C&P as NRL--Move layer behind-- EL 2--DS --TR

14.) EL 7 -- R = 60% USM-C&P as NRL-- place on upper right corner--DS--TR--free rotate- right 25%

15.) EL 6--R= 60% --USM-C&P as NRL--place on upper left side.

16.) EL 5-- R = 60% USM --C&P as NRL--place lower right bottom--DS--TR

17.) EL 9--R = 40%-USM--C&P as NRLPlace on upper center-- DS--TR

18.) with bottom still closed off -MV all layers R--56%-sharpen--504 X 504

Add paper of choice.

19.) add a mask of choice--delete mask--ungroup layers--when done-- open bottom layer and MV all layers..

Now add All Copy Rights and Name --then save as PNG.

Thank you Cari for letting me use your kits..and I really would like to see,any results using my tutorials.

Thanks

Angie

Burr 1 PTU

I wrote this Tutorial, any resemblance to others is purely coincidental. Please fo not add this to any Website, group or forum, without my permission. The awesome kit I am using is called " Burr" and is by Cari at Black Widow Creationz and can be found Here

This Beautiful Christmas tube I am using is by Elias Chatzoudis and can be found Here

Drop Shadow / DS / 2,2,50,5,black

2 Tubes of choice

Let's begin.

900 X 900

1.) EL 13 / C&P as NRL / place in center / With magic wand / click inside all 3 circles / selecton/ modify / expand 5

2.) P 9 ( or one of choice) C&P as NRL / place this over the frame / invert on frame / delete on paper, move this layer below frame / DS both

3.) With Magic Wand / click inside left circle/ modify/expand/5 /with full size tube/Resize 80% /I mirrored mine,/ C&P as NRL place over circle, invert on frame / delete on tube / Select none /on right side/with Magic Wand click inside the circle/ C&P tube/ leave tube size./ move boobs up/ TR/ do the same for left side circle/ invert / delete/ DS all tubes/
4.) With main tbe place on center circle / I made mine to look as if it was sitting on the circle/ dup./Blur/gaussian 6/ blend mode / hard light/ opacity /90 / MD. / now close the bottom layer and MV all layers/ rename / frame
5.) EL 28 / C&P as NRL / place on top left / move below frame / dup/ mirror andflip/ MD / DS
6.) EL 31. / change color to match the colors on tube / C&P as NRL/ place on top left/ TR/ DS /dup. mirror ad flip/MD/ and place below frame layer.
7.) EL 17 / C&P as NRL / place on left bottom /DS/TR
8.) EL 1 / R / 80% / sharpen/ place on left ( mirror) on the bottom/ DS / TR
9.) EL 16/ change color to match tube /C&P as NRL / place it on top right side / DS / dup./ mirror /R / 80% X2 / place on right side bottom /TR/ move this below the scarf layer,
10.) EL 20 / R /80% / sharpen/ C&P as NRL/ place on left side top / DS / TR
11.) EL 22 / R / 50% X2 / unsharp mask/ C&P as NRL/ place it on right side / DS / TR
12.) EL2 / R/ 50% / USM/ DS  place on bottom / left side bottom next to glass.
13.) EL 19 / R/ 60% / USM / C&P as NRL / place on right side of the glass/ move below on center / TR/ DS
14.) EL 18 / C&P as NRL/ place onlower right side // DS/TR
15.) EL 6 / R /60 / USM / C&P as NRL / Place upper right corner/ DS/ TR
16.) EL 5 / R / 60 % / USM / C&P as NRL / mirror. place on lower left bottom/DS/TR
17.) EL 9 / R / 40% & 80 % / USM./ C&P as NRL place on lower right corner / DS / TR/ dup. mirror/ close out bottom layer.
18.) MV all layers / R / 56 % / sharpen / With Paper of choice/ add a mask / delete mask / ungroup layers/ now open bottom and MV/ all layers
19.) Add all Copy Rights / your name / and save as PNG.
Thank you for looking at nny tut. if you do use this, I would really like to see. Thank you
hugs
Angie

 



NikyXmas PTU

I Wrote this Tutorial and any resemblance to others is purely a coincidence. Please do not upload this to any website,forum or group without my permission.

The Art we are using is by Barb Jensen and you can find her art Here 

The Scrap kit I am using is called "NikyXmas" and is by Cari at Black Widow Creationz and you can find it Here 

My Supplies Here  

2 Christmas tubes

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

900 X 900

1.) EL. 29 -- Frame- Copy and Paste =C&P - as New Raster Layer = NRL-- Place in center and move the frame up a little.

2.) With Magic Wand - Click inside - Selections - Modify- expand - X 5

3.) Paper 10 ( or one of choice ) - C&P as NRL - place over frame -- invert and delete- place paper below frame-- DS on both -- Select None = SN

4.) Tube ( of choice ) --Resize = R = if needed - - C&P as NRL - Duplicate = Dup. - Blur - Gaussian - 6 - Blend Mode = BM = Multiply - Opacity - 75% - Merge Down = MD = DS-  with Magic Wand - click on inside of the frame - invert on frame - delete on tube - SN -- OP = 72% - move tube below frame.. now close of bottom layer and Merge Visible = MV - rename layer = Frame

5.) EL. 10 - - C&P as NRL - Place below frame-- move down a little -DS - Tag Reference = TR

6.) EL. 14 - R = 60% - adjust - sharpness  - unsharp  mask - = USM.-- - C&P as NRL - place it on right side of canvas - above EL10-- DS -  EX. 1-- - Dup.- flip - and place it across from the other-- TR- now Dup. again-- And R = 80%  continue duplicating and resizing till you are happy with it- MD all these layers and rename it Doodle.

7.) EL. 11 - R = 60% and 80% -- USM -- - C&P as NRL - - place on doodle-- DS - TR - Dup. move to open part of doodle -- EX.2 -- Continue going to left side of doodle--Close out frame and doodle and MV bow layer and then MD to doodle.

8.) EL. 12 - R = 60% and 80% - USM -- - C&P as NRL --- place on left side at bottom -- DS --TR -Dup.- and Mirror-- TR-- MD

9.) EL. 1 --  - C&P as NRL -place on left side  -- Dup. - and move this one below doodle layer-- now with freehand selection tool - with these settings -- point to point -- add shift-- feather = 1 - smoothing = 0 - anti -alias - checked - go around the top one only- near the bow -- EX.3 -delete and SN. - DS bottom one.

10.) EL. 15- R = 50% and 80% X2--USM- place  lower left side -- DS-- Dup - R = 80% - place on right side -- TR

11.) Tube #2-- C&P as NRL - place it on the right side- I mirrored mine-- now - Dup.- Blur- gaussian - 6

BM = Soft light -- Op.= 100% -- MD -- DS-- TR

12.) EL 21- R= 65 % and 80%- USM-  - C&P as NRL - place bottom left-- DS

13.) EL. 22- - C&P as NRL - place on top right-- DS -- TR-- Dup. - mirror- R = 80%-- place below the 1st one--TR-- Keep repeating if you desire.

14.) EL. 26 - R = 60%--- C&P as NRL - place below the frame layer -- Dup.- R = 80% place on both of the left side next to santa. DS

15.)  EL. 31-- C&P as NRL - place below poinsetta layer -- do not DS

16.) EL.6 - R = 50% -- USM -- - C&P as NRL -place on right side in front of tube-- DS-- TR

17.) EL. 7 - - C&P as NRL -  place on bottom layer -- center-- DS -- TR -- close out bottom layer-- MV all other layers-- R = 56% - sharpen.

18.) Add a paper of choice -- I used ( Paper 9 ) make sure the paper is on bottom-- add mask of choice-- delete mask -- ungroup layers-- then crop -- opaque -- open bottom layer, MV. all layers- 

Add all Copy right info.. name and  save as PNG..

Thank you for doing my tutorial.

Hugs

Angie  

 

Wintery Xmas PTU

I wrote this Tutorial, any resemblance to others is purely coincidental..Please do not upload this to any website,forum or group without my permission.

The Christmas tubes I am using is by Al Rio.. I have no Idea where to find his Art.. and will add it if anyone sends me a note.

The kit is called "Christmas" and is by Beth at Glimmer and Sparkel you can find her kits Here

Drop Shadow / DS / 2,2,50,5  black

Supplies / Examples Here

1 or 2 tubes
Filters / Mura meister // copies

Let's Begin:

900 X 900

1.) Tree 3 .../Resize / R / 75% & 80%.../ sharpen / unsharp mask../ USM //Copy and paste / C&P / as New Raster Layer / NRL/ place on left side / in center

2.) Tube / C&P as NRL / place on right side of Tree. / Duplicate.. / dup. / blur / gaussian / 6 / Blend mode / bm / hard light / opacity / op/80% / Merge Down / MD.. / DS

3.) Add 2nd tube / same as before../but change BM to soft light / and OP / leave at 100 / MD and DS /C&P as NRL / mirror and place it on the left side../ Tag reference / TR

4.) Christmas Flower .. / R ../50 % X 2 & 80% X 3 / USM /C&P as NRL../ go to Mura Meister's / Copies / make sure flower is in center../ use these settings./ Line, wrap around / behind / line / 5, 100, 0, 0, 0, 1/0/0/ 0 / 100 / 0/ 0 / 3/0/ 0..As in EX. 1 ./ add DS.
5.) Candy Cane / R. / 40 % / sharpen / place on left side/ between both flowers / DS / move layer below tree layer../dup. / place this between next 2 flowers /  repeat 2 more X's till you have a total of 4 / TR / mirror the last 2 / on the right.
6.) Candy Cane regular size . / C&P as NRL / place next to tree on the left side/ move layer below tree layer / dup. / R / 80 % mirror / place on right side  of tree../ move down a bit.
7.) Ornament 3 / open no not add yet./
8.) Christmas shoe 4.. / R / 40% & 80% X 2 ../ C&P as NRL / onto ornament /DS and then MD / now C&P as NRL./place on center top./ with lasso tool, these settings / point to point ./ add shift / feather / 1 / smoothing / 0 / anti alias checked/ Ex. 2 / when done MD on top of flower / DS / TR / EX. 3
9.) Ornament 1 ./ repeat number 8.) resize 90% / USM. / use boot instead.. / DS on boot.  / MD./ when happy R./60% X 2../  C&P as NRL / USM / place layer below tree on the left side./ DS. / TR.
10.) Mistel Toe / R. / 40% X 2 / Sharpen. / C&P as NRL /  place on right side / DS. / TR. /
11.) Cupcake 1 / R. / 40% & 80 % X 2 / USM. / C&P as NRL / place in front of box.. / DS. / TR.
12.) Hot Cocoa / R. / 40 % X3 / USM. / C&P as NRL / place on left front./ DS. / TR.
13.) Present 1. / R. / 40 % X 3 / USM. /C&P as NRL / place on right front. /DS. / TR.
14.) Present 2 / R. / 40 % X 2 / USM. / place this one next to other present on right side front/ DS. / TR.
15.)Pepperment / R. / 60 % X 2 & 80 % / USM. /C&P as NRL  / Place it on the right side./ move this layer below the tube layer. / DS /Dup../ R / 80% and place this one on left side / continuw duplicating and resizing them don't forget to sharpen, now, / close off the bottom layer (background layer) Merge Visible// MV / all layers..
16.) Paper 3.. / or one of your choice.. / add mask of choice. / delete mask,and then ungroup layers.. when happy open bottom layer and the MV./ all layers
17.) R / 56 % /504 X504 / Add all Copy Right info and Name
Save as Png.
Hugs
Angie



Revenge PTU

I wrote this Tutorial,any Resemblance to others is purely by coincidence. Please DO NOT add this to any Website,Group or Forum without my permission..

The art I am using is By Jamie Kidd and can be found Here  

This Awesome kit is by Cari at Black Widow Creationz it is called "Revenge" and can be found Here  

My Supplies Here  

Drop Shadow = DS = 2,2,50,5 black

 900 X 900

Let's begin

1.) EL 44 --Copy and Paste = C&P as New Raster Layer= NRL--With Lasso tool--these settings: point to point-- add shift -- feather 1 -- smoothing- 0 --anti- alias cheked..

Go around the heart-- with Face tube, C&P as NRL  place it center in your heart, invert on heart and delete on tube. Select none = SN--crop --opaque--900 X 900 -- DS on tube and on heart. Merge Down = MD

 Move it to the top Left side,Tag reference = TR

2.) EL 8 --C&P as NRL-- place on the left side bottom -filters-Eye Candy 4000-- Gradient Glow-- 3- fat- yellow--(ffff40) DS,TR

3.) Grass --from my supplies-- C&P as NRL-- place on bottom,by the tree--  Duplicate - Dup. move below tree layer, DS --Merge Visible = MV.-grass and tree.

4.) EL 9-- Resize = R.= 50% & 80% X2-- sharpen -- Unsharp Mask = USM-- C&P as NRL--place on top of tree --DS--TR--Dup.--R = 80% place on bottom right--TR--Dup -- move below tree ---- on top - using freehand selection tool --go around  the nut ,to make it look like its hanging off the tree--EX.'s 1 & 2

5.) EL 41 -- R = 50% X 2-- USM --C&P as NRL-- place on bottom left side-- free rotate -- right - 25-- dup and move below tree -- with freehand selection tool-- same settings--go around top of lock as in EX. 3-- cut as in EX 4-- DS on bottom lock.

6.) EL 33_ R = 50% & 80% X2 --USM--C&P as NRL-- place in center of the tree -- TR-- Dup. And place this layer below tree-- do this like the other layers--once done - DS --bottom element--TR--

7.) EL 34 -- R = 50 % & 80% X 2 -- USM-- C&P as NRL-- TR--
Dup. And place this layer below tree-- do this like the other layers--once done - DS --bottom element--TR--

8.) EL 22. -- R = 40% & 80% X 3--USM--C&P as NRL -- place on tree-- right side--DS--TR--free rotate -- right 25 -- dup. --move this below tree- go around top with freehand selection tool--make sure it looks like it's hanging on tree--DS--  TR-- close out Layer 1 & 2 -- only tree and elements active--MV all layers --rename -- tree.

9.) EL 21 -- C&P as NRL -- place on bottom left -- DS-- move below tree layer

10.) EL 24 --C&P as NRL -- place on top right side--DS

11.) EL 28 --place on right at bottom -- DS -- dup. mirror and place right next to it--TR

12.) EL 45-- C&P as NRL --Place in front of shoes--DS--Dup and mirror-- move them to look like they were inside shoes, when happy move this layer below 1st shoe layer..

13.) Tube -- C&P as NRL-- R = if needed-- Duplicate -- Blur -- gaussian--  6 -- Blend Mode = Soft Light -- opacity = 100-- MD and DS-- move tube a little over from the shoes.

14.) EL 36 -- C&P as NRL -- place on right side top DS--  TR--move layer to right above Background

15.) EL 39 -- C&P as NRL -- Place layer bottom left-- DS --TR

16.) EL 4 -- C&P as NRL --Place on upper left top -- move layer right above background--NO DS -- Dup. -- Mirror -- MD-- TR

17.) EL 3 -- C&P as NRL -- place on bottom right-- move layer above background-- Dup. -- Mirror --  NO DS -- MD-- TR

18.) EL1 -- R = 50% & 80% X 2 --USM -- C&P as NRL --place on bottom left side--DS--TR--Dup. R = 80%-- place a few around. TR

19.) EL 10 -- R = 50%  & 80% -- USM -- C&P as NRL--mirror-- and place above the heart on left top -- DS -- TR

20.) EL 12 -- R = 50% X 2-- USM -- C&P as NRL-- place on tree--DS--Dup. and place it around-- I put mine on the tree. TR

21.) EL 13 -- R --50% -- USM -- C&P as NRL--  place on tree -- DS -- Dup. and place it around-- I put mine on the tree. TR 

22.) EL 18  --  C&P as NRL -- place on skulls -- DS -- Dup.-- R = 80% -- place this one next to the other one. TR.

23.) EL 32 -- R = 50% --USM -- C&P as NRL-- place on top of socks -- mirror-- DS -- TR 

24.) Open all layers but Bottom-- MV all other layers -- R = 56% = 504 X 504 -- sharpen

25.) Paper of Choice -- I used P 6-- C&P as NRL--make sure it's above background/ bottom..Now Add a Mask of choice--delete mask -- ungroup layers-- crop-- opaque --

26.) Open Bottom/ background layer and MV all layers-- Now add all Copy Rights and Name-- Save as PNG.

Thank you for trying my tutorial.

Hugs

Angie      

  

Autumn Vineyard FTU

I wrote this Tutorial, any resemblance to others,is purely coincidental..Please do NOT add this to any Website,Forum or Group,without my Permission...

The Tube I am using is by Anne Stokes and can be found Here  

This Awesome Kit I used is called " Autumn Vineyard" it is a FTU kit,by Melissa at P&A Dezines You can find her work Here and Here  

My supplies  Here  

Drop Shadow = DS = 2,2,50,5 black

900 X 900

1.) EL.16--Resize = R = 60% sharpen -- Unsharp mask = USM- Copy and Paste = C&P as New Raster Layer = NRL- Place in center--DS

2.) C&P the lake/Stream as NRL--you will find these in my supplies-it was made by me,please do not use it in other tags . move this below bridge--make sure it looks good when happy add DS.

3.) Grass _ also found in my supplies-- C&P as NRL -- Place on bottom left--duplicate = dup.-- mirror and make sure it fits together--merge down = MD -- then crop -- opaque - 900 X 900-- ok - dup. grass again- and move this below the water and bridge layers--rename your layers--grass,water,bridge--

4.) Sky- also in my supplies -C&P as NRL--place below grass layer--dup. - mirror--MD- Crop Opaque -- 900 X 900 move up a little-- dup. --when happy MD. and Crop Opaque--same settings

5.) Clouds -- also in my supplies --  C&P as NRL-- place on left side -- dup.-- R = 80% sharpen-- dup. -R = 80% - sharpen- place it like mine-Tag Reference = TR -- No DS

6.) Tube -- C&P as NRL--place on bottom left--dup.-adjust-blur-gaussian-6--Blend Mode = Hard light -- opacity--90% --MD--DS--

7.) EL.15--C&P as NRL--place on right side of bridge--DS--TR

8.) EL.10 -- R = 50% X 2-- USM--C&P as NRL--place on tree branch--DS--do as many as you wish,duplicating the leaf and placing them on the tree..when happy.MD, all leaves to tree-TR

9.) EL.11. --R-= 50% & 80% -- USM - C&P as NRL - DS -place on tree--dup a few X's, I did 3,Merge them onto the tree.

10.) EL.18-R = 50% X 2 & 80% X 2 - USM --C&P as NRL--DS--place below tree on the grass--dup.. R = 80%--Place a few around the grassy parts.. TR

11.) EL.2--R = 80% X 2  USM --C&P as NRL--DS -- place on bottom right --dup. == mirror and place below the tube area on left side.

12.) EL.7 -- R = 50% -- USM.--C&P as NRL--DS-- place next to bridge on the right side--dup.--R = 80% -- move to left of 1st flower--dup. and move this one on the right of flower. Merge them together. Dup. and mirror,place behind tube.

13.) EL.8 - R= 80% X2-- USM. -- C&P as NRL -- Mirror and place on left side,place below the tube layer.

14.) EL.14--R= 80% -USM.-- C&P as NRL-- place in front of bridge--DS --TR

15.) Sparkles--R = 80%-- sharpen -C&P as NRL- Place on top of tag. TR

16.) EL.9 -- R = 50% & 80% X 2 -- USM. -- C&P as NRL -- place on top of tree --DS-- TR.--dup. and move him down a little..add one more ad put him on the bridge.

If you don't want to animate, Merge Visible all layers-

17.) Add all copy right info, name and save as PNG.. If you want to animate, keep going.

18.) Do not merge, on top layer ADD all Copy right info.

19.) Close bird on the bridge,tube,and CR.. Merge visible all other layers.. 

Copy Bird,mirror, move him over a few inches, Keep coping and mirror until you go down the side of the bridge..now close off all layers but the 1st bird.. open tube..

20.) Open Animation shop,Copy merged and paste the 1st bird/tube layer as New animation, 

21.) Back in PSP, close off 1st bird, open 2nd bird, Copy merged and paste into AS -- after  current frame, continue doing this till you have all your birds walking down the bridge..

Now on 1st frame, Edit, frame Properties,--30 -- with your frames still active, copy merged and go to last frame, paste after current frame, these should now be active,then you want to go to animation--reverse frames, I have a total of 13 frames... 

22.) Now with 13 frames you want to make the 1st and last one slower, so I put #1. = 50

2- 12 = 30

13 = 40

13.) Once happy view and save as GIF..

Thank you for looking at my work..

hugs

Angie

PNG Tag