I Wrote this Tutorial,any resemblance to others is purely a coincidence. Please Do NOT add this to any Forum,Group or Website without my Permission.
The Cute little poser is by Lisa and is included in the Kit.. But you can always go to Lisa's blog and take a look you can find it Here
The Scrapkit I am using is by Sebrina and it's called "Fairy Tale" you can find the kit Here
Filters = Mura Meister = Copies
Lets begin
900 X 900
1.) Butterfly 1 -- Resize = R= 80% X 2-- sharpen -- unsharp mask = USM- Copy and Paste = C&P as New Raster Layer = NRL-- place in center of canvas.
2.) Go to your filters and open MMCopies -- use these settings --- Tile --feedback-- line tile --behind
8,20,-10,0,0, /0,/100,100,0,0,/30,0 (X bottom,leave ) the #'s with /#, means its not in use..EX. 1
3.)With selection tool--Rectangle--add shift--feather = 1--anti-alias-checked--go to middle and draw a rectangle--EX. 2
float--defloat -- invert--delete--select none = SN --EX.3
DO NOT DS--rename -- rectangle
4.) Butterfly 3 -R= 75% --USM--C&P as NRL--mirror--and place on top left -- DS
5.) Butterfly 2--R = 75% --USM--C&P as NRL-- place on bottom right -- DS-- tag reference = TR
6.) Ft- Butterfly -- C&P as NRL-- plsce in center--move it to bottom center--put layer below butterfly 2- layer-- DS - TR
7.) Carriage --C&P as NRL-- Mirror-- place on bottom left--DS
8.) Diamond Plate -- C&P as NRL-- place upper right and move layer to right above the bottom layer
9.) Light --C&P as NRL-- mirror--place upper right side--DS--move layer below- butterfly 1 layer
10.) Daffodils - R = 60% & 80% -- -USM--C&P as NRL-- place on bottom right -- DS-- duplicate = dup. -- R - 80% - place next to it --on right--dup -- R = 80% place on left -- TR --merge down = MD
11.) Bow - R = 50% --USM--C&P as NRL--place on bottom right flowers -- DS -- TR-- With raster deform tool -- move out a bit -- MD
12.) With Free hand selection tool-- (These Settings : point to point --add shift -- feather = 1 - smoothing = 0 -anti - alias-- checked) go around insde of butterfly 2--
13.) C&P one of the posers - I used #2--invert--delete--SN --dup.-adjust--blur--gaussian- 6-- Blend Mode = BM --multipy -- Opacity = OP - 80%--MD -- DS -- Crop -- opaque--900X900--
BM- hard light
14.) SS lisa Tink-- C&P as NRL-- place over butterfly 3--center-- dup.-- blur- gaussian 6-BM-= hard light-- OP--90% -- MD--DS -- TR
15.) Lisa Tink 1 --C&P as NRL -- place on bottom center-- dup.-- gaussian blur --6 -- BM - Hard light-- OP = 100%-- MD-- DS-- TR
16.) Bird -- R = 50%---USM--C&P as NRL--place on the canvas next to carriage -DS--TR-- dup.-R = 50% -sharpen --place next to it--TR--dup-Big Bird--R = 60% sharpen --place on top of lantern -- mirror -- TR
17.) Dragonfly -- R = 60 % X 2 ---USM--C&P as NRL-- mirror -- place on upper middle -- DS--TR--dup. -- 80%--place on other side of lantern -- TR
18.) Frame 2 --R = 50%--USM--C&P as NRL-- mirror--place layer rectangle layer--move it ove to the right-- DS-- TR
19.) Lighting Bugs -- C&P as NRL-- place on upper right -- NO DS-- TR
20.) Sparkle --C&P as NRL-- place on upper middle-- NO DS--TR
21.) close out bottom layer-- Merge Visible = MV -- all layers--C&P as NRL--add a paper below merged layer--add a mask of your choice,--delete mask --ungroup layers-- TR-- you might need your raster deform tool to help straighten out the paper-- I used P 5 -- Trese Mask 0010--
22.) open bottom layer-- MV--all layers-R = 56% -- sharpen -- - add ALL Copy Rights and Name--when happy save as PNG-
Thank you for doing my tutorial.
hugs
Angie
4.) Butterfly 3 -R= 75% --USM--C&P as NRL--mirror--and place on top left -- DS
5.) Butterfly 2--R = 75% --USM--C&P as NRL-- place on bottom right -- DS-- tag reference = TR
6.) Ft- Butterfly -- C&P as NRL-- plsce in center--move it to bottom center--put layer below butterfly 2- layer-- DS - TR
7.) Carriage --C&P as NRL-- Mirror-- place on bottom left--DS
8.) Diamond Plate -- C&P as NRL-- place upper right and move layer to right above the bottom layer
9.) Light --C&P as NRL-- mirror--place upper right side--DS--move layer below- butterfly 1 layer
10.) Daffodils - R = 60% & 80% -- -USM--C&P as NRL-- place on bottom right -- DS-- duplicate = dup. -- R - 80% - place next to it --on right--dup -- R = 80% place on left -- TR --merge down = MD
11.) Bow - R = 50% --USM--C&P as NRL--place on bottom right flowers -- DS -- TR-- With raster deform tool -- move out a bit -- MD
12.) With Free hand selection tool-- (These Settings : point to point --add shift -- feather = 1 - smoothing = 0 -anti - alias-- checked) go around insde of butterfly 2--
13.) C&P one of the posers - I used #2--invert--delete--SN --dup.-adjust--blur--gaussian- 6-- Blend Mode = BM --multipy -- Opacity = OP - 80%--MD -- DS -- Crop -- opaque--900X900--
BM- hard light
14.) SS lisa Tink-- C&P as NRL-- place over butterfly 3--center-- dup.-- blur- gaussian 6-BM-= hard light-- OP--90% -- MD--DS -- TR
15.) Lisa Tink 1 --C&P as NRL -- place on bottom center-- dup.-- gaussian blur --6 -- BM - Hard light-- OP = 100%-- MD-- DS-- TR
16.) Bird -- R = 50%---USM--C&P as NRL--place on the canvas next to carriage -DS--TR-- dup.-R = 50% -sharpen --place next to it--TR--dup-Big Bird--R = 60% sharpen --place on top of lantern -- mirror -- TR
17.) Dragonfly -- R = 60 % X 2 ---USM--C&P as NRL-- mirror -- place on upper middle -- DS--TR--dup. -- 80%--place on other side of lantern -- TR
18.) Frame 2 --R = 50%--USM--C&P as NRL-- mirror--place layer rectangle layer--move it ove to the right-- DS-- TR
19.) Lighting Bugs -- C&P as NRL-- place on upper right -- NO DS-- TR
20.) Sparkle --C&P as NRL-- place on upper middle-- NO DS--TR
21.) close out bottom layer-- Merge Visible = MV -- all layers--C&P as NRL--add a paper below merged layer--add a mask of your choice,--delete mask --ungroup layers-- TR-- you might need your raster deform tool to help straighten out the paper-- I used P 5 -- Trese Mask 0010--
22.) open bottom layer-- MV--all layers-R = 56% -- sharpen -- - add ALL Copy Rights and Name--when happy save as PNG-
Thank you for doing my tutorial.
hugs
Angie
No comments:
Post a Comment