Angel of Mine PTU

I wrote this Tutorial,any resemblance is purely a coincidence.

This Beautiful kit is called : "Angel of Mine," by Cari and you can find it in her stores Here 

 These Lovely Angels are by Jennifer Janesko and you can buy her Tubes Here

You'll need 2 Tubes, 1 full and 1 not

My supplies Here

Drop Shadow = DS 

900 X 900

1.) EL 41 -- Copy and Paste = C&P as New Raster Layer = NRL. -- Place in center of canvas.

2.) With Lasso tool - {point to point - add shift -- feather = 0 -- smoothing = 0 --- anti-alias -- checked } go around one side of the gate-- ( EX.1 ) -- Copy merged --Select None = SN-- place it next to the poles ( EX.2 ) tag reference = TR.. now duplicate = dup. - mirror - and make sure this one is at the same height as the original -- continue doing this till you have a fence - once your happy -- close bottom layer and Merge Visible = MV. --rename = Frame -- DS & TR

3.) Grass - C & P as NRL - place it at bottom of the tag? dup. and mirror -- Merge Down = MD -- dup. --  flip and place this on top of the bottom grass-- continue to do this until your grass is slightly below fence. when all is done with the bottom still closed -- close off fence -- and MV all grass layers. DS and then Crop -- opaque -- 900 X 900 -- rename grass. move grass layer below frame layer.

4.) Sky --- C & P as NRL - dup. -- and mirror -- MD -- crop - opaque -- and rename Sky -- NO--DS. -- move this layer below the grass layer.

5.) Clouds -- Resize = R -- 75% -- sharpen--  C & P as NRL --

place in center and then move it up -- dup. --R = 75% sharpen-move to the right----rename clouds -- NO--DS.--TR

6.) EL. 34 --- C & P as NRL---place  upper right side-- move layer below cloud layers--move it to the larger cloud-- TR
7.) EL. 38 -- R = 75% X 2 -- unsharp mask = USM --  C & P as NRL --  place over the moon -- No -- DS -- TR
8.) EL. 34 -- R = 75% X 2 -- sharpen --  C & P as NRL -- place her next to the gate on the left side -- DS -- TR
9.) EL. 3 --  C & P as NRL -- place on the gate -- DS -- TR
10.) EL. 6 --R= 80 % X 3 --USM --   C & P as NRL -- place in front of fence on right side-- DS -- TR
11.) EL. 40 -- R = 60% & 80% --  C & P as NRL -- mirror and place on Upper left side -- DS--TR
12.) Tube --  C & P as NRL -- dup. -- blur - gaussian 6- Blend Mode = BM = multiply -- opacity -- 90% -- MD -- DS -- TR
13.) EL. 1 --R= 50% --USM -- C & P as NRL -- place on left side-- dup. -- blur -- gaussian -6 -- BM = Hard light -- opacity - 80% -- MD -- DS-- TR-- dup. -- R = 80% -- move it to right side -- mirror
14.) EL. 15 -- R - 60% sharpen -- C & P as NRL --DS - Move this below the tube layer -- TR
15.) EL.17 --  C & P as NRL -- place this on left side- move  layer below the bird -- NO - DS
16.) EL 2. -- R = 50% X2 -USM  -- C & P as NRL -place it next to wand-- DS --  TR
17.) EL. 12 - R = 50% & 80% X 2 --USM-- C & P as NRL -place on right side-- near fence--DS -- dup -- R = 80% sharpen -- move over by kitty on left--dup. --R = 80% -- mirror -place near smaller Kitty -- TR
18.) Tube 2 (-R = if needed -) R = 80% sharpen --- C & P as NRL - -dup.-- blur - motion -- BM = soft light - Opacity = 90% -- MD -- DS - with shadow on new layer - checked --MD -- OP. = 100  -- move layer below the gate layers-- right above the sky -- DS - TR --Opacity 70%
19.) EL. 21 -- R = 60%--USM -- C & P as NRL -place on bottom right --DS-- TR -- Dup -- R -- 80% sharpen --  move to right in front of gate -- TR
20.) EL. 29 -- C & P as NRL -- Place on right near the fence -- then move layer below the fence layer -- DS -- dup -- R =60% -- mirror -- and move it toward the dove --TR
21.) EL. 27 -- R 50% & 80% --USM -- C & P as NRL - place in center front -- DS -- TR -- with raster deform tool
 move up mouse and place it on top center nofe -- move down -- (EX.3), (EX. 4) then move it up slightly--as in  (EX.5)--place layer below 1st angel layer--
22.) EL. 25 -- C & P as NRL - place in center of tag.. moved layer --  down a littl -- move layer below wand layer--  TR -- DS
23.)  EL. 26 -- C & P as NRL --place on top of tag--dup & flip -now open bottom of layer- MV--all layers
24.) Resize 56% - sharpen -- add ALL Copy Right info--save as PNG
Thank you for checking out my tut.'s
hugs
Angie