I wrote this Tutorial,any resemblance to others is purely a coincidence. Please DO NOT place this on any Website, Forum or Group without my Permission.
This cool kit is called "Poison" from Cari at Black Widow Creationz and you can buy it Here
The tube is by Ismael Rac and you can find it Here
Masks: Trese Masks Here
Grass
You'll have to resize for the tutorial. Just copy and paste.
Drop Shadow =DS = 2,2,50,5 black
Let's begin
900 X 900
1.) EL. 20 - Copy and Paste = C&P as New Raster Layer= NRL
2.) Paper 7 (or your choice) with magic wand click in center of frame, selections- modify - expand 6-- C&P as NRL - place over frame-- invert on frame -- delete on paper -- Select None = SN.-- move layer below frame,and DS both...
3.) Duplicate = Dup. = tube - blur - gaussian 6-- Blend Mode = Soft light -- Opacity =100% -- Merge Down = MD -- Dup. tube- move this below frame-- on top tube delete any over hanging the frame-- and then on bottom tube do the same, when done -- add DS to bottom tube, and close off bottom layer and Merge Visible all layers- rename = frame -- then move up and to the right a little -- tag reference = TR.
4.) EL.15 -- C&P as NRL - mirror and place this on bottom left side -- DS
5.) Grass --- C&P as NRL - Resize = R -- if needed,I did 50% and sharpened -- once small enough -- place over the tree base -- -- DS -- TR
6.) EL. 2 -- C&P as NRL - place on bottom right --DS--move layer below frame -- TR
7.) EL. 12 - R = 80% - sharpen -- C&P as NRL - place on left side -- DS -- TR
8.) EL. 22--R = 60% -- unsharp mask = USM-- C&P as NRL - place on right side top -- DS -- TR
9.) EL. 26 -- C&P as NRL - place layer beow frame
10.) EL. 28 -- C&P as NRL - place on right side center--Dup. - miror- MD--and place layer below frame layer -TR
11.) EL. 25 - C&P as NRL - place above bottom layer--DS--TR
12.) EL. 31 -- C&P as NRL - place on bottom center--DS -- mirror--TR
13.) EL. 36 - C&P as NRL - place on left side bottom-- DS - TR. - Dup.- and mirror--place dup. on bottom layer -- TR
14.) EL.37-- C&P as NRL - place on bottom center--mirror -- DS -- TR
15.) EL. 38 -- C&P as NRL -place on right bottom --DS --TR -- Dup.--R=80%--mirror --TR
16.) EL. 39-- C&P as NRL - DS--place on top left side-TR -Dup. --R= 80% - sharpen--mirror and place in center ride side-TR
17.) EL. 1- R= 60%--USM-- C&P as NRL - place below right side bat -DS --TR
18.) EL. 8 -- R = 50% - USM-- C&P as NRL -place on bottow left side--DS--Dup. R = 80% - place next to the other-- TR
19.) EL. 6 - R = 60% - USM -- C&P as NRL -place on top of tree left side--DS--TR
20.) With bottom still closed --Merge Visible all layers -- R = 56% - USM --( 504 X 504 )
21.) Paper of choice I used # 4 -- C&P as NRL - and place this above bottom--
22.) After I added the paper I duplicated it, and added a different mask to both layers of papers, then I MD.. I used
Trese Masks 46 and 49
Crop Opaque - 504 X 504
now open bottom layer, Merge Visible all layers--
Add all Copy right info and save as PNG
Thank you for checking out my tut.
Hugs
Angie
This cool kit is called "Poison" from Cari at Black Widow Creationz and you can buy it Here
The tube is by Ismael Rac and you can find it Here
Masks: Trese Masks Here
Grass
Drop Shadow =DS = 2,2,50,5 black
Let's begin
900 X 900
1.) EL. 20 - Copy and Paste = C&P as New Raster Layer= NRL
2.) Paper 7 (or your choice) with magic wand click in center of frame, selections- modify - expand 6-- C&P as NRL - place over frame-- invert on frame -- delete on paper -- Select None = SN.-- move layer below frame,and DS both...
3.) Duplicate = Dup. = tube - blur - gaussian 6-- Blend Mode = Soft light -- Opacity =100% -- Merge Down = MD -- Dup. tube- move this below frame-- on top tube delete any over hanging the frame-- and then on bottom tube do the same, when done -- add DS to bottom tube, and close off bottom layer and Merge Visible all layers- rename = frame -- then move up and to the right a little -- tag reference = TR.
4.) EL.15 -- C&P as NRL - mirror and place this on bottom left side -- DS
5.) Grass --- C&P as NRL - Resize = R -- if needed,I did 50% and sharpened -- once small enough -- place over the tree base -- -- DS -- TR
6.) EL. 2 -- C&P as NRL - place on bottom right --DS--move layer below frame -- TR
7.) EL. 12 - R = 80% - sharpen -- C&P as NRL - place on left side -- DS -- TR
8.) EL. 22--R = 60% -- unsharp mask = USM-- C&P as NRL - place on right side top -- DS -- TR
9.) EL. 26 -- C&P as NRL - place layer beow frame
10.) EL. 28 -- C&P as NRL - place on right side center--Dup. - miror- MD--and place layer below frame layer -TR
11.) EL. 25 - C&P as NRL - place above bottom layer--DS--TR
12.) EL. 31 -- C&P as NRL - place on bottom center--DS -- mirror--TR
13.) EL. 36 - C&P as NRL - place on left side bottom-- DS - TR. - Dup.- and mirror--place dup. on bottom layer -- TR
14.) EL.37-- C&P as NRL - place on bottom center--mirror -- DS -- TR
15.) EL. 38 -- C&P as NRL -place on right bottom --DS --TR -- Dup.--R=80%--mirror --TR
16.) EL. 39-- C&P as NRL - DS--place on top left side-TR -Dup. --R= 80% - sharpen--mirror and place in center ride side-TR
17.) EL. 1- R= 60%--USM-- C&P as NRL - place below right side bat -DS --TR
18.) EL. 8 -- R = 50% - USM-- C&P as NRL -place on bottow left side--DS--Dup. R = 80% - place next to the other-- TR
19.) EL. 6 - R = 60% - USM -- C&P as NRL -place on top of tree left side--DS--TR
20.) With bottom still closed --Merge Visible all layers -- R = 56% - USM --( 504 X 504 )
21.) Paper of choice I used # 4 -- C&P as NRL - and place this above bottom--
22.) After I added the paper I duplicated it, and added a different mask to both layers of papers, then I MD.. I used
Trese Masks 46 and 49
Crop Opaque - 504 X 504
now open bottom layer, Merge Visible all layers--
Add all Copy right info and save as PNG
Thank you for checking out my tut.
Hugs
Angie
No comments:
Post a Comment