Poison PTU

I wrote this Tutorial, any resemblance to others is purely coincidental.

Please DO NOT add this to any Website,Group of Forum without my permission.

This Awesome kit is by Cari at Black Widow Creationz called "Poison" and can be found Here

The poser is provided with the kit and is by Medi you can find her posers Here  

My Supplies Here 

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

900 X 900

1.) Fence 4 --Copy and Paste = C&P as New Raster Layer = NRL --- Place in Center --DS

2.) Tree 1 -- C&P as NRL --place on left side DS-- tag reference = TR

3.) Vine 1 =  C&P as NRL -- Mirror and place on right side of fence. Duplicate = dup. -- working on top layer, With your Lasso tool - with these settings: point to point -- add shift -- feathering = 1 -- smoothing = 0 --- anti-alias -- checked -- go around the vine and delete the areas where it looks like the vine is going through the fence.

4.) Vine 2 -- C&P as NRL -- place next to tree, move layer below tree layer.. DS --TR

5.) Vine 4 -- C&P as NRL -- Resize = R -80% -- sharpen -- place next to tree -- move layer below tree layer. DS -- dup -- mirror-- place on left side of other vine.

6.) Wire 1--R = 60% X 2 -- sharpen -- unsharp mask = USM-

C&P as NRL -- place on top of fence --DS--move to top - dup. and place in center of fence -- place each one ,at each bottom of X on the fence-- TR

7.) Skull 4 -- R = 60% -- USM -- C&P as NRL -- place on bottom right side -- DS--

8.) Rock 1 -- R = 80%- C&P as NRL- place on right side, move under the skull,( to where it looks like it's on top of rock ) TR--DS-- dup - mirror- place a few around.

9.) Heart 2 --C&P as NRL -- place in upper middle of fence -- DS -- TR

10.) Bottle 1-- R = 80% X 2 --USM --C&P as NRL-- place on left side of tree --DS -- TR

11.) Bottle 2 -- R = 80% X 2 -- USM -- C&P as NRL -- place next to the other--DS- TR

12.) Bottle 3 -- R = 80% X 2 -- USM-- C&P as NRL-- place on right side of tree--free rotate -- right 10

13.)Head Stone-- R = 60% USM -- C&P as NRL -- place in center of fence at the very bottom -- DS --TR

14.) Grass -- from my supplies -- C&P as NRL -- place on bottom -- dup. & place this below the 1st one,dup. & place this below the 2nd one..Merge Down = MD -- dup. the merged area, and place this one above the other,MD and make sure this layer is right above the bottom layer.

15.) Candles -- R = 60% X 2 --USM-- C&P as NRL--place on top of headstone--DS

16.) Bling 1 -- C&P as NRL -- place layer above the grass layer-- opacity = 70%

17.) Poser 1 -- C&P as NRL -- place on bottom right -- DS

18.) Skull 2 --C&P as NRL --place on right side above rge fence-- DS -- TR

19.) Mist 1 --- C&P as NRL - move to the right side-- move layer above the background--dup. & mirror--MD --then move down to wear it sits on top of grass-- dup. & flip --bring it up a little--MD

20.) Spider web-- R = 60% X 2 --C&P as NRL -- place it on the tree--DS--dup. and place this on top right of fence --TR  

21.) Spider -- R = 50% --USM -- C&P as NRL -- place on bottom of spider web --DS --TR

22.) Bat -- C&P as NRL--place on right side, DS. dup. R = 50 % move to between poser and bat--TR--- dup. mirror and move up some.

23.) Blood 1 -- R = 50% & 80% X2-- USM--C&P as NRL--place on head stone. DS --TR

24.) Flower 1 - 5 ( since these are all the same resize and on seperate layers) R = 50% X 2 & 80% USM --C&P as NRL--place them in front of head stone--DS (each) -- TR-- move below the poser tube--with raster deform tool--straighten it out..

25.) Bottle 4 -- R = 45 % -USM--C&P as NRL -- place on lower left bottom--DS -- TR

26,) Now we are going to make a jagged bottle--after resizing it..R = 45% USM--C&P as NRL -- with lasso tool, the same settings as before -- draw a jagged edge break--EX.1-- once happy, hit cut-- now go around the jar -- EX. 2 --promote selection to layer--rename top --Select none -==SN

DO the same  for bottom--on top free rotate right --90

place where you want just C&P and then add a DS.

I place mine here and there,, TR 

26.) Once your happy--merge visible all layers--and resize to 57%--

Now Add all CR info -- your name and save as PNG..

Thanks for looking

hugs

Angie

Lavender Blue PTU

I Wrote this Tutorial, any resemblance to others is purely a coincidence...Please DO NOT add this to any Group,Forum or Website/Blog..

The kit I am using is called "Lavender Blue" and is by Lady Noelle of Lady Noelle-Buttons and Bows and you can find it Here  

The Art, I am using is by Barbara Jensen and you can find all her tubes Here  

Let's get started.
Filter : Xenofex2--Constillation

My Supplies Here  

Open my supplies and download them where you can see my Examples...

Drop Shadow = DS = 2,2,50,5 black

900 X 900

2 Tubes, same Artist,

1.) Ln Gate -- Copy and Paste = C&P -- as New Raster Layer = Nrl--Center -- DS

2.) Flower 3--R = 75X2 (if needed) sharpen - unsharp mask = USM --Place on bottom of gate--- DS -- duplicate = Dup.-

mirror-- Tag Reference = Tr.

3.) Flower 2 -- R = 75% USM--C&P as Nrl -- Place on right side--move layer below other flowers -- DS

4.) Flower 1-- R = 75%   USM--C&P as Nrl --Place on left side, move layer below other flowers-- DS
5.) Flower 10 -- R = 75% X3 USM--C&P as Nrl --place on bottom of fence over Rose stems--DS -- Dup.--mirror--Merge Down -= MD
6.) Close out bottom layer,and then Merge Visible all layers-- rename gate -- move it up to the right some--Tr
7.) Tube--(resize if needed)   C&P as Nrl -- (NO DS-)- Tr place on left side top--mirror-then Dup. mirror this one too,place this on the bottom right of tag..- move layer above the bottom-- now use the mask I have in my supplies..and use it for both tubes--Opacity - 50%and when finished --MD
8.) Tube -- C&P as Nrl -- Mirror and place on bottom left of the gate DS-- Tr
9.) Hanging Jewels curtain--R = 75% and 90% 
USM--C&P as Nrl--place on top -move layer below flower (Do not DS)
10.) Journaling mat - R= 60%  USM--C&P as Nrl--place on bottom left--DS --Tr--move below tube layer
11.) Bow 6 - R = 50% & 80%X 2 -USM--C&P as Nrl-- place center top of gate--DS--Tr
12.) Bow4-- R = 50% & 80% X2 --USM--C&P as Nrl--  place on bottom between the 2 flowers--Dup. and move this one below the merged later--then on the top Bow- with your freehand selection tool--(these settings)  Point to point--add shift--feather = 1--smoothing = 0-- and anti-alias-- checked---EX.1 & 2--DS-- on the bottom bow--close out bottom layer--tag and tube layers--Merge visible-- now open all layers but bottom...
13.)  Working on top again..Corset 02B--C&P as Nrl-- place on right bottom--Below masked tube layer--opacity = 70% -- DS--Tr
14.) Corset 03B--C&P as Nrl-- Opacity 70%--place this one on top left and move layer below the masked tubed layer..DS --Tr
15.) Perfume bottle 1--R = 75% USM--C&P as Nrl--place on bottom center--DS--Tr.
16.) Perfume bottle 2--R =75% --USM-C&P as Nrl--place on bottom left side of tag---DS --Tr
17.) Heart 1 -R =75% X2--USM-C&P as Nrl-- place on right side bottom-- DS -- Tr..--Dup.. R- 75% sharpen--leave this on the other heart--DS--MD
18.) Heart 2 -R = 50% USM- C&P as Nrl- place on left center-- DS --Tr.
19.) Safety Pin --R = 50%  USM-C&P as Nrl- Place on mat--DS--Tr.
20.) Lady bug 1-- R =50% & 60% -USM- C&P as Nrl--place on top near bow--DS-- Dup.-- R = 60% -- sharpen-- place on bottom right side ---Tr.
21.)Lady bug 2 -- R = 50% & 60% --USM- C&P as Nrl--place on top right side -- DS--Tr. Dup. --R--= 60% --sharpen --place on bottom left side Tr.. (blue and purple heart) purple on the tag..
22.) Now close all layers But 2,3,4, from bottom up...MV--all layers--rename bottom--rename raster1 --background
23.)  Close Background & bottom layer-rename (raster 3) Diamond Curtains
24.) From merged layer to upper--MV-- rename "Top"
so now you should have 4 layers,working from bottom upward...background -- bottom -- diamonds --- top
EX.3
25.) Resize 56%=--504 X 504 --add a paper above the background, then add a square mask of choice.delete mask and then ungroup layers, don't forget to crop opaque.
Add all copy right info, if you don't want to animate,then Merge visible all layers,after adding CR, and name save as PNG
If you want to animate..continue
26.) now close all layers beside the Diamonds--with your freehand selection tool,same settings --- go around each diamond as shown on EX.4-once done--promote selections to layer---now duplicate the diamond layer 3 X = 4 -- diamond layers --rename diamond 1,2,3,&4--close out 2,3,4, layers..now working on layer #1, go to filter--Xenofex 2 --constillations--with these settings : 1.98,29,17,35,61,57,keep original image--random seed-1. 
as shown in EX. 5 &6
27.) Close layer 1 and working on layer #2, same filter just hit the Random seed 1X..when done with all layers-- copy merged,and paste into animation shop,for all layers, now you should have 4 frames-click on the 1st frame,and then Edit all- now go to animation properties and opaque-- then go to frame properties - and change your speed to 20 for all 4 frames..when happy save as GIF.. as shown in the tag at the bottom.
Thank you for looking at my tutorial
hugs
Angie

 

Lil girl 1st Day FTU

I wrote this tutorial and any resemblance to others is purely a coincidence. Please do NOT upload this to any website,forum,or group...

I loved this Kit,its called "Lil Girl's first day" By Cari at Black Widow Creationz  Here
The Little girl is my Great Niece and it was her 1st day of school.
Drop Shadow = DS = 2,2,50,5 black
Let's get started
900 X 900
1.) EL 15  -- Copy and Paste = C&P as New raster layer = Nrl--DS
2.) Picture or tube-- C&P as Nrl -- Resize if needed -- Place on left bottom of tag-- ( mirror if needed) -duplicate--Blur -- gaussian = 6--Blend Mode = Multiply -- opacity = 80% --when happy merge down--DS
3.) EL 12- Resize = R = 75% -- unsharp mask = Usm -- DS--- C&P as Nrl
4.) EL 13 -- R = 50% & 75%  x2 --sharpen = unsharp mask= USM --   C&P as Nrl --- place on upper left side--DS
5.) EL 14 -- R = 80% -- sharpen --C&P as Nrl -- place on bottom right side.
6.) EL 19 -- R = 60% Usm-- C&P as Nrl --Place next to back-packDS
7.) EL 21 -- R = 60% Usm -- C&P as Nrl -- place it on upper right of chalkboard--DS -- tag reference = Tr
8.) El 25-- add a New raster layer and place it on the bottom--  I used some old photos of my neice,and filled in the spaces, I used her brothers pic to add as the driver...kinda thought that was cute..lol
when done, merge all layers 
 EL 25--R = 75% --Usm--C&P as Nrl-- place on top of Chalk board--DS--Tr
9.) EL 16 -- R = 75% X 2--Usm --C&P as Nrl --place on upper left side above the eraser--DS--Tr --
10.) EL 6 -- R 50 % & 75%--Usm - -C&P as Nrl --place on upper left top 
11.) EL 5-- r  = 50% & 75% --Usm --C&P as Nrl --place next  to other crayon--free rotate left 15 --DS--Tr
12.) EL 10--R = 50% & 75% & 80% --Usm --C&P as Nrl -- place it on top of paper- left upper side--DS--Tr
13.) EL 17 -- R = 50% --Usm--C&P as Nrl -- place it on upper left side--DS
14.) EL 20 --C&P as Nrl -- place on bottom -- move layer below tube layer-- crop opaque--DS
15.) Color to match tube-- type name on T-shirt -- DS --Tr
I used "KaileenW" font ( f/black -- b/f92be8)
16.) With same font-- write name on lunch box--use your raster deform or Pick tool--and mess with the name to make it look like it's written on the box--use your nodes-when happy-  add DS--the duplicate and MD--Tr--R - 50% -- Usm--C&P as Nrl -- place on upper right--move layer below paper layer--Tr  ds
17.) EL 9 -- R = 50% --Usm--C&P as Nrl --place pencil on top-- free rotate right --90% -- place next to bus-DS
18.) EL 7 -- R = 50%--Usm --C&P as Nrl --place next to the chalk board on the right..Tr  DS
19.) EL 8 -- R = 50% -- Usm--C&P as Nrl -- place under Bus--DS--Tr
20.) EL 4- R = 50%--& 75% -- Usm--C&P as Nrl -- place near crayons-- DS-- Tr
21.) EL 11 - R = 50% & 75 % Usm--C&P as Nrl --(I added her name on the bucket--Merge visible- ) and place it on center Bottom --DS --Tr
22.) Close the bottom layer- and R = 56%--sharpen-- add paper of choice-- (I used P6) place this on bottom and add a mask of choice -- delete mask layer--ungroup layers.. 
now open bottom layer, merger visible all layers--
ADD ALL Copy Right Info and your name, then save as PNG.
Thank you for checking out my tutorial
hugs
Angie

Peacock PTU

I wrote this tutorial,any resemblance to others is purely a coincidence.

Please DO NOT add this to any Group,Forum,or website without my permission.

The art work I am using is by Rebecca Sinz, She was with DSI..You can now find her work Here 

The Awesome kit I am using is called "Peacock" and is by Beth of : Glimmer N Sparkel and you can find it Here 

Drop Shadow = DS = 2,2,50,5 black

You need to get 2 colors from your tube

Let's Begin

900 X 900

1.) Fence-- Copy and Paste = C&P as New raster Layer = NRL -- Place in center of canvas -- DS

2. Tube -- Resize = R = if needed-- C&P as NRL-- Place it on top of fence--duplicate = dup. = adjust -blur- gaussen- 6- Blend mode = BM-- Opacity = 90% -- Merge down= Md.= DS

3.) Feather-flower = R = 30% &75% X2 -- Sharpen- Unsharp Mask = Usm.- C&P as NRL - Place on the fence -- DS -- tag reference = TR.-- dup. = R = 75% -- place it lower than #1- dup. again - R = 75% place this lower than #2. TR

4.) Feather 3- R = 75% -- sharpen -- free rotate - R - 10% -- flip - and place this one below top flower--dup.--flip--free- rotate --Right- 10%--DS--both -- with lasso tool--(these settings) Point to point--add shift -- feather = 1 -- smoothing = 0-- anti-alias-checked--once done --go around the tips and delete them = EX.

 

when done--select none = SN - Md

5.) Peacock -R = 40% & 75% -- Usm -- C&P as NRL -- place on bottom --right side--DS--TR -- dup. --R = 75%- mirror -- Close out all layers place on bottom left--TR

6.) Pond - R= 60% & 80%--Usm -- DS --Place this layer below the peacock layers..now cutoff the feet  on the peacock to the right, to let it look like it was standing in the water..-TR

7.) Grass --C&P as NRL-- (Please do not use this outside of this tut.Just right click and save.)

place below the pond and both Peacocks -- dup. -- mirror  and MD -- crop --opaque -- 900X900 -- dup. -- flip -- MD -- repeat this until you have enough grass. when happy make sure you MD all grass layers.

8.) Doodle -- C&P as NRL --place on right side of frame.move this layer below gate layer -- DS --TR

9.) Close out all layers above the feather layers,tube,bottom,and doodle--Merge Visible = MV --all layers --open all layers but bottom and then rename "fence" then move it up a little.

10.) Corset2--R = 50% & 80% X2 -- Usm -C&P as NRL- move layer below fence layer -- DS -- Place on right side --TR

11.) Doodle2 --R--80% sharpen -- C&P as NRL -- flip & move to center -- move layer below frame layer & corset-- DS

12.) Fan -- R = 60% & 80% --Usm -- C&P as NRL -- place on left top -- free rotate -- left 25% --  DS -- move below frame layer-- dup.--R = 80% -- flip and place this one on left bottom ----TR -- free rotate -- Left --25% --(again) dup. -- R = 80% & mirror.

13.) Glasses -- R = 40% Usm--C&P as NRL -- Place on upper right next to corset..DS -- TR

14.) Lipstick -- R = 40%X2 & 60% --Usm --C&P as NRL--plae on right side near the fan-- DS--TR

15.) Shoe2-- R = 50% X2 & 65%--Usm --C&P as NRL -- place on left center-DS-dup. -- mirror-- place this below other -- TR--Place layer below peacock on left side,

16.) Ribbon flower - R -= 20 % 80% Usm..-C&P as NRL-

Place on the bottom of frame--move layer to above the frame layer--DS--Md to frame.

17.) Close Peacock 1 and Bottom layer-- MV all other layers- R = 56% all layers--sharpen -- paper of choice- I used P15 -- C&P as NRL-- place above bottom-- add mask of choice-- I added 1 mask with 2 different colors--(P 15 & P 13)-- once done..delete mask--ungroup layers.. when happy open all layers and MV.

18. ) Add ALL Copy Right info.. and Save as PNG.

Thank you for doing my tut.

Hugs

Angie 

Come with me PTU

I Wrote this tutorial,any resemblance to others is purely a coincidence. 

The tube I am using is by Barbara Jensen and can be found Here  

The Kit I am using is called "Come with Me" and is by Cari at Black Widow Creationz and can be found Here  

800 X 800

Drop shadow = DS = 2,2,50,5 black

Let's begin

1.) Tube--Copy and Paste = C&P as New raster layer = NRL- place on Bottom left side

2.) El 27 -- C&P as NRL -- place upper right corner--DS

3.) EL 25 -- C&P as NRL --place in center of tag.DS

4.) EL 31 --- C&P as NRL -- Place on bottom rt corner--DS- Tag Reference = TR--move layer below EL 25 layer

5.) EL 33-Resize = R = 80% sharpen--- C&P as NRL -- - place under love WA and move layer below teddy bear layer--DS & Tr

6.) EL 35--- C&P as NRL ---- place on right side --mirror-place roses below teddy layer--DS & TR--duplicate = dup.-mirroe R=80%--sharpen --place layer below tube layer--TR

7.) EL 39 --flip -- C&P as NRL --place on middle bottom--DS -TR-place layer just above tube layer

8.) EL 19 --R = 80% X2-- Unsharp Mask = usm---- C&P as NRL --dup.-- mirror-make it look like its on 1 layer--Tr--EX.1--DS --merge down = MD --crop-selection--opaque
EX:

 

9.) EL 4-recolor to match your tube--by using manuel color correction-- once happy- R = 50% & 80%--usm- -- C&P as NRL ---place on left side bottom-in front of tube--dup.--mirror and place infront of other

10.) EL 7 -R = 50% X2-- usm---- C&P as NRL -- mirror and place it on the left of bear --right bottom--DS--Tr.

11.) EL.6-R= 505 & 80% -- Usm ---- C&P as NRL --place on left side-move layer right above flower layer --DS & Tr

12.) Now we add some candy --dup. a few and Resize them by 80%, don't forget to sharpen as you go..

13.) EL 9 -R = 40X2--usm-- C&P as NRL -- Place it on right side of bear--dup and R= 80% sharpen --continue to do this with all other candies--DS -- Tr

14.) EL 17 - R = 40% X 2 -- usm -- C&P as NRL --place in front of bear--DS--Tr-Dup. R = 80% - place right side of 1st one--dup. mirror -- place it on the other side of cupcake..

15) EL1-R = 50%- USM- place in front of candy box in center--Ds--Tr

16.) EL- 18--R = 50% --USM-- C&P as NRL -- place on right side of candy box -- DS - Tr.

17.) EL 2 R = 40% & 80% X2--Usm-  -- C&P as NRL -- place on bottom on top of candy box-DS-Dup. R = 80% sharpen when needed--place in front on the bottom left--Tr

18.) EL 8 --R= 50% X3--Usm--- C&P as NRL --place it on top of center heart -- DS --Tr--dup.and place the other Candy near teddy bear.

19.) EL 11 - R = 40% X2 -- USM -- C&P as NRL -- place around tag - DS - Tr

Dup.. once or twice - depending on how many you want,don't forget to sharpen as you go,Tr.

20.) El 26 -R = 40% X2 & 80%- usm -- C&P as NRL -- place on center box- DS - dup. - and move this in front of tube. - TR

21.) EL 10- R = 60% X2 & 80% - usm -- C&P as NRL --place on center box- DS- and then dup- place it on the heart on top center..TR

22.) Paper of Choice I used #2--add a mask of choice--delete mask and then ungroup layers-- crop opaque.

23.) EL 24 - R = 50% - Usm -- C&P as NRL -- place layer above your mask layer--put rose on top right corner of mask -DS- dup. - mirror - dup - flip-( pull it out a little, so you can see the pedals -) dup - mirror- pull out a bit to the right --Tr    

24.) EL 40 -- C&P as NRL -- place on top - dup-flip move down a bit

25.) EL 5 - R = 50% & 80%-usm-- C&P as NRL -- mirror--DS- move to upper right corner-place layer below sparkle-- DS--TR

26.)open bottom layer--Merge visible all layers--R = 63% - sharpen-- Add ALL opy right infor, your name and save as PNG.

Thanks for looking at my tags.

Hugs

Angie