Wolfman PTU

I wrote this Tutorial, any resemblance to others is purely a coincidence. Please do NOT add this to any group,forum or website, without my permission.

The Kit I am using is called "Wolfman" by Cari at Black Widows Creationz and can be found Here

The artwork is by Jay Trembly and can be found Here

Drop Shadow....DS....2,2,50,5 black

My Supplies Here

Let's Begin

900 X 900

1.) EL 14.... Copy and Paste.. C&P as New Raster Layer ...NRL

2.) With Magic Wand .... click on the inside or circle ... Selection ... modify ... expand ... X 30

3.) Dirt 2 ... C&P as NRL ...  invert on frame ... delete on dirt....move below frame ... close off.

4.) Repeat 2.. Then Paper 7 & moon, move into frame.... invert on frame, and delete on both Paper and moon. move these below frame and 3. DS all.

5.) Tube ... C&P as NRL ... duplicate ... dup.... and then adjust...blur...gaussian...6...Blend Mode... soft light ... opacity 100..... merge down.... now dup.... move this layer below frame ... now erase any of the tube on the right,..that is over the frame.. now add DS to bottom tube .. open all layers but bottom and Merge Visible  ... rename frame,and just leave bottom layer closed.

6.) Dirt again, C&P as NRL ... place it below the frame .. move it up a little,you might have to dup. the dirt so you will have enough.... now crop, ...  opaque ... DS .... tag reference ...TR

7.) EL 29 .... Resize .....R .....80% sharpen .... C&P as NRL ... DS ... place on left side front.

8.) EL 9 ... R ...80% X 2... sharpen...unsharp mask..... USM.....  C&P as NRL ... place in front of bike. DS.

9.) EL 10... R ...70..sharpen ....C&P as NRL .....  place this on the left side bottom .... place layer below bike layer.

10.) EL 1 .... R ...70 sharpen .... C&P as NRL ... place next to boots ... DS .. TR

11.) EL 12 ... R...70% USM .... C&P as NRL ... move to lower right side...... DS .....  TR

12.) Paper 7 .... C&P as NRL ... place right above bottom layer .... use your deform tool to enlarge the paper..... TR

13.) EL 24 ... R ..50% & 80 % ... USM ... C&P as NRL...

place in center ... and move below cycle layer..... DS ... TR

14.) EL 23... R...50% & 80% X2 ... USM ... C&P as NRL ... place next to other log.. TR .... DS

15.) EL 5 .... R... 65% ... sharpen ..C&P as NRL... place on bottom center...place next to canteen ... DS

16.) EL 4 ... R... 50% & 80% ... USM... C&P as NRL .....place infront of bike ...DS ... TR

17.) EL 7 .... C&P as NRL ...  place on left side .... DS ...  move layer below frame layer ... TR

18.) EL 35 ....R .. 80% X 3 ... USM... C&P as NRL ... place on right side bottom ... move layer below wolf layer... DS ... TR ... free rotate ... right 90%

18.) EL 34 ... R ...70% X 2 ... USM ...C&P as NRL....DS....free rotate left  90 % .. move it to bottom right ... move layer below chain layer .... DS .... TR

19.) Sparkle .... C&P as NRL... DON'T DS .... place on bottom paper layer, I added a few.. when happy open Bottom layer and Merge Visible all

20. R ... all layers 56% Sharpen.... add all Copy rights and then your Name.... save as PNG.

Thank you for checking out my tutorial,if you use it, please let me see what you've made..

Hugs

Angie

 





Play to Win PTU

I Wrote this Tutorial, any Resemblance to others is purely a coincidence.

Please DO NOT add this to any Group,Forum or Website without my permission.

This awesome kit is called "Play to Win" by Alexis at Alexis's Graphics Palace and can be found Here  
 The Tube is by Greg Horn his website is Here 
(If You happen to know where Greg Horn is selling his art,please let me know so I can add it,Thank you)
My Supplies Here
Drop Shadow = DS - 2,2,50,5 black
Open my Supplies,and add them to your Brushes
Let's Begin
900 X 900
1.) Frame 3- Copy and Paste = C&P as New Raster Layer = NRL --place n center of canvas.
2.) With magic wand click on the center of frame-Selections- modify --expand 10
Choose a Paper -- I used paper 5--C&P as NRL place on frame.. Invert frame layer and delete on paper- crop opaque on the paper,then move below frame and add a DS to both
3.) Close the frame and bottom layer-- open your brushes -- add new raster layer to your canvas,and use any one of the aces- using anyone of the colors from the layout colors--I used the color white,and I made my cards--move it where it looks nice, I copied mine and mirrored it, make sure none of these are over hanging the paper, once happy - convert to raster layer. I Merged Down = MD, add DS
4.) Tube of choice- C&P as NRL and place under the frame layer-- erase any that is over hanging the frame..once happy--duplicate = dup. -- tube-- adjust -blur - gaussian  6, Blend Mode = Soft light - Opacity - 100% -- MD--DS--When this is all done,make sure your bottom layer is closed, and Merge Visible = MV -- all layers..-- rename : frame
5.) EL 22 - C&P as NRL -place in center of canvas-move it  to the upper right and bring layer below frame.-- DS --duplicate and mirror =place this one a little below.. move layer below frame layer--crop opaque
6.) EL 16--Resize = R -=75% sharpen- C&P as NRL-- place on right bottom -DS and tag reference = TR
7.) EL 12 -R = 90%--sharpen--C&P as NRL-- place on bottom left-- DS -- TR
8.) EL 9 -- R = 75% unsharp mask --USM --C&P as NRL- place on EL12 -- DS - TR
9.) EL 27 -- R = 75 sharpen--C&P as NRL -place on top left -- DS
10.) EL 28 - R = 80% USM--C&P as NRL -place on right side top-- mirror -DS--TR
11.) EL 1 -- R=80% - sharpen--C&P as NRL--place on right side frame-- DS
12.) EL 2 -- C&P as NRL -- place this one in the middle and bottom of frame -- DS-- TR
13.) EL 3 --R = 89% X 2 -- USM--C&P as NRL--place on left center-- DS -- TR
14.) EL 10 -- R = 60% X 2 -- USM --C&P as NRL--place on upper --DS -- TR
15.) EL 11 --R = 60% X 2 -USM --C&P as NRL--place this one on center of frame and move it below #EL 10 -- DS -- TR
16.) EL 31 -- R = 50 % & 80 USM--C&P as NRL-- place bottom center--DS--dup.--R = 80% sharpen -- free rotate=right 80-- TR
17.) EL 40 --C&P as NRL--Place layer below frame-move to upper left side- dup. -mirror --flip--move to bottom right side--MD--No DS -- TR
18.) EL 35 --R -- 50% -- USM --C&P as NRL--Place on top left --DS --dup. -- R = 80% sharpen -- free rotate --left 70% -- I placed a few around..--TR
19.) EL 38 -- R = 70% -- USM --C&P as NRL-- place on top -- dup. -- R - 70% -- sharpen -- free rotate -- right 70-- dup. -- mirror - I added 1 more.  
20.) MV.- all layers -- keep bottom closed -- R = 56% sharpen-- add paper above bottom layer- I used P2-- add mask of choice--delet mask--ungroup layers--crop opaque-- when done, open bottom layer and MV -- all layers-- sharpen -- now add ALL Copy Right info..your name.. and save as PNG.
I hope you had fun,and I would really like to see if you used my tutorial.
Hugs
Angie

Acidia PTU

I Wrote this Tutorial,any Resemblance to others is purely coincidental. Please do NOT add this to any Forum,Website or Group,without my permission,thanx's

The Beautiful Kit I am using is called "Acidia" and you can find it over at Cari's store "Black Widow Creationz" Here 

The Beautiful Tube is by Rebecca Cox and can be found Here 

My Supplies Here  

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

open my supplies and put them where you can use, they are examples of this tut.

900 X 900

2 Colors from tube-One Dark and one light.

1.) Grab your Ellipse tool - Circle-Create as Vector checked- Line style-Diamond-width-20-on materials palatte-background- dark color- draw out a good size circle -( EX.1)

Ex.1b.- align-center in canvas- (EX.2)--convert to raster layer -Duplicate = dup.

2.) With magic wand - starting at top- click inside each other Diamond- I did mine left and then right till I got to the bottom,and there is 2 at the bottom,as in (EX.3)

3.) With light color- add New Raster Layer-color all the ones who have "ants" around them as in (EX. 4)--. when you are done delete the duplicate- you should now have 3 layers, rename them - I did mine dark cir. and light cir.

4.) Working on top layer- grab Ellipse tool again- circle- create as Vector checked--line solid--Width 10--Gradient- gold-angle/0 - repeats-/0-invert unchecked -(EX. 5 & 6) back ground - Gold- F/0--draw out a circle as all most as large  as the diamonds (EX.7 ) center in canvas- convert to raster layer--now as an Inner Bevel-color -AD8F3B -(EX. 8)

5.) Paper 9 ( or 1 of choice) --with magic wand-click inside the circle-- copy and paste = C&P as New Raster layer = NRL- invert on frame -- delete on paper--select none- crop opaque-900X900--DS--place paper below frame.

6.) Tube - C&P as NRL -place in center - dup.- blur- gaussian 6 -- blend mode = multiply - opacity - 70 - merge down-= MD-- DS -- Tag reference  = TR

7.) EL 19 - C&P as NRL - place on the upper right--DS

8.) EL 18 - Resize = R.-80% -sharpen -move to upper left - place right above bottom layer--free rotate - left - 15-DS-TR

9.) EL. 28 - C&P as NRL -place on paper layer--move layer below tube - DS - TR

10.) EL.3-C&P as NRL -place on left side center--DS--Dup.-Mirror and move the layer below frame layer remove any that is over hanging--TR
11.) EL.34--C&P as NRL -- mirror- move to bottom of frame-- place layer above bottom layer--DS--Dip. --Flip--MD--
12.) EL. 35 --R = 80% X2-C&P as NRL - move to lower left bottom -- DS -- mirror -- TR
13.) EL. 9 --C&P as NRL-- place bottom right--DS
14.) EL. 8--C&P as NRL--place center right -- DS -- TR
15.) EL. 7--   C&P as NRL--DS -- move layer right above heart layer -- Dup.-- mirror - flip-- MD
16.) EL . 29 -- R-= 60% -- USM --C&P as NRL -place on  bottom left layer- DS--move layer below-- layer 35
17.) EL 25 - R = 60 USM - C&P as NRL -- place on left side-- DS -- TR
  Dup. R = 80% -- place a few of each flowers around--
18.) EL 11--R = 50%-USM -C&P as NRL- place on paper- move behind tube-- mirror -- DE -- RT
19.) EL 12- R - 50 % X 80% X 2 -- USM -- C&P as NRL--place on right side -- DS. --TR.
20.) EL. 16- R.--60% -- USM --C&P as NRL-- place it  on paper layer - move below frame . DS & TR
21.) EL 14-- R= 60% X2 USM =C&P as NRL -- place on upper left side--place under frame --DS--TR--I added 3 flowers
22.) EL. 30- C&P as NRL- place center on tag (DS)
23.) EL 31.- C&P as NRL -- place on bottom of tag (TR) (DS)
24.) Close all layers from peach diamond down--Merge Visible = MV -- rename top
25.) Close out top-peach diamond--brown diamond--MV --rename bottom-
26.) resize all layers 56-= 504 X 504 --add paper of choice,and then mask of choice--delete mask, ungroup layers--Md to bottom--crop opaque-- ADD ALL Copy RIght info  and name,if you dont want to animate go ahead and save as Png.. 

                                            Let's animate

open Animation shop

1.) Close peach layer-Copy merged + CPM and Paste into animation shop as new animation.

2.) Close this layer and open pink one, CPM -- paste into selection--repeat till you have all layers in AS

when done, view then edit all --animation properties-- white --opaque.. then frame properties -- set at 20

thank you for trying out my Tutorials

hugs

Angie

                                     
not -annimated

                                  

  
                                                                                                                                                                                                                                  

Burr 2 PTU

I wrote this tutorial,any resemblance to others is purely a coincidence.

Please do NOT add this to any Groups,forum,website etc. without my permission.

Our Scrap kit is by Cari at Black widows Creationz .its name is "Burr" found Here  

The tube I am using is by Cherie Roberts and can be found Here
DS = 2,2,50,5 black
Lets Begin:
900 X 900
1.) EL 34--C&P as NRL--with Magic wand -click on the inside frame
2.) P6  - (or one of your choice) C&P as NRL-- invert and delete --SN --move below frame
3.) Tube -- C&P as NRL -- now duplicate- Blur-gaussian 6- blend mode= multiply -Opacity = 80% --MD -- Dup --now move layer below frame
4.) With Freehand selections tool -- These settings-(-point -  to - point, add shift,feathering =1,smoothing = 0,and anti-alias, checked --)go over frame layers on top--EX..

DS bottom tube--close bottom layer and then MV all layers--rename --Frame

5.) EL 12 - R = 80% --sharpen-- C&P as NRL--place on right side - DS

6.) EL 16 -- C&P as NRL --Place upper left top -- DS-- move layer below frame layer

7.) EL 3 -- C&P as NRL -- Place on right middle -- TR -- move layer below tree -- DS

8.) EL 32 --C&P as NRL -- place on  bottom left -- DS

9.) EL 14 --C&P as NRL--Place on Upper right -- DS --dup. and mirror -- move it over to the other one on right side--crop -- opaque--900 X 900--do this for all 3 layers-- MD

10.) EL 1 -- C&P as NRL -- R=80% - sharpen--place on left side bottom -- DS -- TR

11.) EL 2 -- R = 50% --USM--C&P as NRL-- Place it left center of tag --DS--TR-- dup. R = 80% place near tree--TR-- dup. R = 80% place upper middle side of tree--TR

12.) EL 19--R = 50%--USM --C&P as NRL--PLace on tag--lower left bottom--beside glass--DS--dup.-R=80%--move behind glass-- TR

13.) EL 18-- R = 80%- USM-- C&P as NRL--Move layer behind-- EL 2--DS --TR

14.) EL 7 -- R = 60% USM-C&P as NRL-- place on upper right corner--DS--TR--free rotate- right 25%

15.) EL 6--R= 60% --USM-C&P as NRL--place on upper left side.

16.) EL 5-- R = 60% USM --C&P as NRL--place lower right bottom--DS--TR

17.) EL 9--R = 40%-USM--C&P as NRLPlace on upper center-- DS--TR

18.) with bottom still closed off -MV all layers R--56%-sharpen--504 X 504

Add paper of choice.

19.) add a mask of choice--delete mask--ungroup layers--when done-- open bottom layer and MV all layers..

Now add All Copy Rights and Name --then save as PNG.

Thank you Cari for letting me use your kits..and I really would like to see,any results using my tutorials.

Thanks

Angie

Burr 1 PTU

I wrote this Tutorial, any resemblance to others is purely coincidental. Please fo not add this to any Website, group or forum, without my permission. The awesome kit I am using is called " Burr" and is by Cari at Black Widow Creationz and can be found Here

This Beautiful Christmas tube I am using is by Elias Chatzoudis and can be found Here

Drop Shadow / DS / 2,2,50,5,black

2 Tubes of choice

Let's begin.

900 X 900

1.) EL 13 / C&P as NRL / place in center / With magic wand / click inside all 3 circles / selecton/ modify / expand 5

2.) P 9 ( or one of choice) C&P as NRL / place this over the frame / invert on frame / delete on paper, move this layer below frame / DS both

3.) With Magic Wand / click inside left circle/ modify/expand/5 /with full size tube/Resize 80% /I mirrored mine,/ C&P as NRL place over circle, invert on frame / delete on tube / Select none /on right side/with Magic Wand click inside the circle/ C&P tube/ leave tube size./ move boobs up/ TR/ do the same for left side circle/ invert / delete/ DS all tubes/
4.) With main tbe place on center circle / I made mine to look as if it was sitting on the circle/ dup./Blur/gaussian 6/ blend mode / hard light/ opacity /90 / MD. / now close the bottom layer and MV all layers/ rename / frame
5.) EL 28 / C&P as NRL / place on top left / move below frame / dup/ mirror andflip/ MD / DS
6.) EL 31. / change color to match the colors on tube / C&P as NRL/ place on top left/ TR/ DS /dup. mirror ad flip/MD/ and place below frame layer.
7.) EL 17 / C&P as NRL / place on left bottom /DS/TR
8.) EL 1 / R / 80% / sharpen/ place on left ( mirror) on the bottom/ DS / TR
9.) EL 16/ change color to match tube /C&P as NRL / place it on top right side / DS / dup./ mirror /R / 80% X2 / place on right side bottom /TR/ move this below the scarf layer,
10.) EL 20 / R /80% / sharpen/ C&P as NRL/ place on left side top / DS / TR
11.) EL 22 / R / 50% X2 / unsharp mask/ C&P as NRL/ place it on right side / DS / TR
12.) EL2 / R/ 50% / USM/ DS  place on bottom / left side bottom next to glass.
13.) EL 19 / R/ 60% / USM / C&P as NRL / place on right side of the glass/ move below on center / TR/ DS
14.) EL 18 / C&P as NRL/ place onlower right side // DS/TR
15.) EL 6 / R /60 / USM / C&P as NRL / Place upper right corner/ DS/ TR
16.) EL 5 / R / 60 % / USM / C&P as NRL / mirror. place on lower left bottom/DS/TR
17.) EL 9 / R / 40% & 80 % / USM./ C&P as NRL place on lower right corner / DS / TR/ dup. mirror/ close out bottom layer.
18.) MV all layers / R / 56 % / sharpen / With Paper of choice/ add a mask / delete mask / ungroup layers/ now open bottom and MV/ all layers
19.) Add all Copy Rights / your name / and save as PNG.
Thank you for looking at nny tut. if you do use this, I would really like to see. Thank you
hugs
Angie

 



NikyXmas PTU

I Wrote this Tutorial and any resemblance to others is purely a coincidence. Please do not upload this to any website,forum or group without my permission.

The Art we are using is by Barb Jensen and you can find her art Here 

The Scrap kit I am using is called "NikyXmas" and is by Cari at Black Widow Creationz and you can find it Here 

My Supplies Here  

2 Christmas tubes

Drop Shadow = DS = 2,2,50,5 black

Let's Begin

900 X 900

1.) EL. 29 -- Frame- Copy and Paste =C&P - as New Raster Layer = NRL-- Place in center and move the frame up a little.

2.) With Magic Wand - Click inside - Selections - Modify- expand - X 5

3.) Paper 10 ( or one of choice ) - C&P as NRL - place over frame -- invert and delete- place paper below frame-- DS on both -- Select None = SN

4.) Tube ( of choice ) --Resize = R = if needed - - C&P as NRL - Duplicate = Dup. - Blur - Gaussian - 6 - Blend Mode = BM = Multiply - Opacity - 75% - Merge Down = MD = DS-  with Magic Wand - click on inside of the frame - invert on frame - delete on tube - SN -- OP = 72% - move tube below frame.. now close of bottom layer and Merge Visible = MV - rename layer = Frame

5.) EL. 10 - - C&P as NRL - Place below frame-- move down a little -DS - Tag Reference = TR

6.) EL. 14 - R = 60% - adjust - sharpness  - unsharp  mask - = USM.-- - C&P as NRL - place it on right side of canvas - above EL10-- DS -  EX. 1-- - Dup.- flip - and place it across from the other-- TR- now Dup. again-- And R = 80%  continue duplicating and resizing till you are happy with it- MD all these layers and rename it Doodle.

7.) EL. 11 - R = 60% and 80% -- USM -- - C&P as NRL - - place on doodle-- DS - TR - Dup. move to open part of doodle -- EX.2 -- Continue going to left side of doodle--Close out frame and doodle and MV bow layer and then MD to doodle.

8.) EL. 12 - R = 60% and 80% - USM -- - C&P as NRL --- place on left side at bottom -- DS --TR -Dup.- and Mirror-- TR-- MD

9.) EL. 1 --  - C&P as NRL -place on left side  -- Dup. - and move this one below doodle layer-- now with freehand selection tool - with these settings -- point to point -- add shift-- feather = 1 - smoothing = 0 - anti -alias - checked - go around the top one only- near the bow -- EX.3 -delete and SN. - DS bottom one.

10.) EL. 15- R = 50% and 80% X2--USM- place  lower left side -- DS-- Dup - R = 80% - place on right side -- TR

11.) Tube #2-- C&P as NRL - place it on the right side- I mirrored mine-- now - Dup.- Blur- gaussian - 6

BM = Soft light -- Op.= 100% -- MD -- DS-- TR

12.) EL 21- R= 65 % and 80%- USM-  - C&P as NRL - place bottom left-- DS

13.) EL. 22- - C&P as NRL - place on top right-- DS -- TR-- Dup. - mirror- R = 80%-- place below the 1st one--TR-- Keep repeating if you desire.

14.) EL. 26 - R = 60%--- C&P as NRL - place below the frame layer -- Dup.- R = 80% place on both of the left side next to santa. DS

15.)  EL. 31-- C&P as NRL - place below poinsetta layer -- do not DS

16.) EL.6 - R = 50% -- USM -- - C&P as NRL -place on right side in front of tube-- DS-- TR

17.) EL. 7 - - C&P as NRL -  place on bottom layer -- center-- DS -- TR -- close out bottom layer-- MV all other layers-- R = 56% - sharpen.

18.) Add a paper of choice -- I used ( Paper 9 ) make sure the paper is on bottom-- add mask of choice-- delete mask -- ungroup layers-- then crop -- opaque -- open bottom layer, MV. all layers- 

Add all Copy right info.. name and  save as PNG..

Thank you for doing my tutorial.

Hugs

Angie  

 

Wintery Xmas PTU

I wrote this Tutorial, any resemblance to others is purely coincidental..Please do not upload this to any website,forum or group without my permission.

The Christmas tubes I am using is by Al Rio.. I have no Idea where to find his Art.. and will add it if anyone sends me a note.

The kit is called "Christmas" and is by Beth at Glimmer and Sparkel you can find her kits Here

Drop Shadow / DS / 2,2,50,5  black

Supplies / Examples Here

1 or 2 tubes
Filters / Mura meister // copies

Let's Begin:

900 X 900

1.) Tree 3 .../Resize / R / 75% & 80%.../ sharpen / unsharp mask../ USM //Copy and paste / C&P / as New Raster Layer / NRL/ place on left side / in center

2.) Tube / C&P as NRL / place on right side of Tree. / Duplicate.. / dup. / blur / gaussian / 6 / Blend mode / bm / hard light / opacity / op/80% / Merge Down / MD.. / DS

3.) Add 2nd tube / same as before../but change BM to soft light / and OP / leave at 100 / MD and DS /C&P as NRL / mirror and place it on the left side../ Tag reference / TR

4.) Christmas Flower .. / R ../50 % X 2 & 80% X 3 / USM /C&P as NRL../ go to Mura Meister's / Copies / make sure flower is in center../ use these settings./ Line, wrap around / behind / line / 5, 100, 0, 0, 0, 1/0/0/ 0 / 100 / 0/ 0 / 3/0/ 0..As in EX. 1 ./ add DS.
5.) Candy Cane / R. / 40 % / sharpen / place on left side/ between both flowers / DS / move layer below tree layer../dup. / place this between next 2 flowers /  repeat 2 more X's till you have a total of 4 / TR / mirror the last 2 / on the right.
6.) Candy Cane regular size . / C&P as NRL / place next to tree on the left side/ move layer below tree layer / dup. / R / 80 % mirror / place on right side  of tree../ move down a bit.
7.) Ornament 3 / open no not add yet./
8.) Christmas shoe 4.. / R / 40% & 80% X 2 ../ C&P as NRL / onto ornament /DS and then MD / now C&P as NRL./place on center top./ with lasso tool, these settings / point to point ./ add shift / feather / 1 / smoothing / 0 / anti alias checked/ Ex. 2 / when done MD on top of flower / DS / TR / EX. 3
9.) Ornament 1 ./ repeat number 8.) resize 90% / USM. / use boot instead.. / DS on boot.  / MD./ when happy R./60% X 2../  C&P as NRL / USM / place layer below tree on the left side./ DS. / TR.
10.) Mistel Toe / R. / 40% X 2 / Sharpen. / C&P as NRL /  place on right side / DS. / TR. /
11.) Cupcake 1 / R. / 40% & 80 % X 2 / USM. / C&P as NRL / place in front of box.. / DS. / TR.
12.) Hot Cocoa / R. / 40 % X3 / USM. / C&P as NRL / place on left front./ DS. / TR.
13.) Present 1. / R. / 40 % X 3 / USM. /C&P as NRL / place on right front. /DS. / TR.
14.) Present 2 / R. / 40 % X 2 / USM. / place this one next to other present on right side front/ DS. / TR.
15.)Pepperment / R. / 60 % X 2 & 80 % / USM. /C&P as NRL  / Place it on the right side./ move this layer below the tube layer. / DS /Dup../ R / 80% and place this one on left side / continuw duplicating and resizing them don't forget to sharpen, now, / close off the bottom layer (background layer) Merge Visible// MV / all layers..
16.) Paper 3.. / or one of your choice.. / add mask of choice. / delete mask,and then ungroup layers.. when happy open bottom layer and the MV./ all layers
17.) R / 56 % /504 X504 / Add all Copy Right info and Name
Save as Png.
Hugs
Angie